I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected the power socket, no problems found 2- I compiled zaptel 1.0.4: cd /usr/src/zaptel/ make clean make install 3- Configured etc/zaptel.conf fxoks=1; this is the location of my fxs port fxsks=4; this is the location of my fxo port loadzone=us defaultzone=us 4-Compiled asterisk 1.0.5 make clean make install 5- Created Sample configuration files make samples 6- Modified zapata.conf, now it looks like this language=en context=incoming switchtype=national signalling=fxo_ks channel => 1 ; this is the location of my fxs port signalling=fxs_ks channel => 4; this is the location of my fxo port 7- Modified extensions.conf [general] [incoming] exten => s,1,Answer() exten => s,2,Playback(goodbye) exten => s,3,Hangup() 8- Loaded the Zaptel Drivers modprobe zaptel 9- Loaded the xcfxs driver modprobe wcfxs THE RESULT IS: Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Not Installed Module 2: Not Installed Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) 10- Configured the signalling using ztcfg ztcfg -vv THE RESULT IS: Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. 11- Start asterisk asterisk -cvvv cli*> Debarko -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050622/c0745148/attachment.htm
I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected the power socket, no problems found 2- I compiled zaptel 1.0.4: cd /usr/src/zaptel/ make clean make install 3- Configured etc/zaptel.conf fxoks=1; this is the location of my fxs port fxsks=4; this is the location of my fxo port loadzone=us defaultzone=us 4-Compiled asterisk 1.0.5 make clean make install 5- Created Sample configuration files make samples 6- Modified zapata.conf, now it looks like this language=en context=incoming switchtype=national signalling=fxo_ks channel => 1 ; this is the location of my fxs port signalling=fxs_ks channel => 4; this is the location of my fxo port 7- Modified extensions.conf [general] [incoming] exten => s,1,Answer() exten => s,2,Playback(goodbye) exten => s,3,Hangup() 8- Loaded the Zaptel Drivers modprobe zaptel 9- Loaded the xcfxs driver modprobe wcfxs THE RESULT IS: Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Not Installed Module 2: Not Installed Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) 10- Configured the signalling using ztcfg ztcfg -vv THE RESULT IS: Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. 11- Start asterisk asterisk -cvvv cli*> Debarko -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050622/135f93ee/attachment.htm
> 9- Loaded the xcfxs driver > > modprobe wcfxsI think that you are using wrong driver!! Check for something like 'wctdm'!!! Best Regards, Anatoliy Kounitskiy
Thank you Anatoliy, I tried to load the wctdm driver but: Modprobe:Can't Locate module wctdm is returned. I followed the instructions that came with the kit, and it doesn't mention wctdm driver loading!?! I thought the wcfxs is a replacement for the wctdm. Thank you again,