asterisk users - Feb 2011 - Problem installing FXS module in old digium 4 channel tdm card

I just installed an FXS module onto a 4 channel tdm thats about 5
years old and it wont work. Running dmesg I can see the following
error:

Zapata Telephony Interface Registered on major 196
Freshmaker version: 71
Freshmaker passed register test
!!!!!!! LOOP_CLOSE_TRES  iREG 1C = 1  should be 1000
!!!!!!! RING_TRIP_TRES  iREG 1D = 8000  should be 3600
!!!!!!! COMMON_MIN_TRES  iREG 1E = 0  should be 1000
!!!!!!! COMMON_MAX_TRES  iREG 1F = 0  should be 200
!!!!!!! PWR_ALARM_Q1Q2  iREG 20 = 1480  should be 7C0
!!!!!!! PWR_ALARM_Q3Q4  iREG 21 = 37C0  should be 2600
!!!!!!! PWR_ALARM_Q5Q6  iREG 22 = 3D70  should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER  iREG 23 = 3970  should be 8000
!!!!!!! RING_TRIP_FILTER  iREG 24 = 78E0  should be 320
!!!!!!! TERM_LP_POLE_Q1Q2  iREG 25 = 8B60  should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4  iREG 26 = 6A40  should be 100
!!!!!!! TERM_LP_POLE_Q5Q6  iREG 27 = 8070  should be 10
!!!!!!! CM_BIAS_RINGING  iREG 28 = FFFF  should be C00
!!!!!!! DCDC_MIN_V  iREG 29 = FFFF  should be C00
!!!!!!! DCDC_XTRA  iREG 2A = FFFF  should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW  iREG 2B = FFFF  should be 1000
 !!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
!!!!!!! LOOP_CLOSE_TRES  iREG 1C = 1  should be 1000
!!!!!!! RING_TRIP_TRES  iREG 1D = 8000  should be 3600
!!!!!!! COMMON_MIN_TRES  iREG 1E = 0  should be 1000
!!!!!!! COMMON_MAX_TRES  iREG 1F = 0  should be 200
!!!!!!! PWR_ALARM_Q1Q2  iREG 20 = 1480  should be 7C0
!!!!!!! PWR_ALARM_Q3Q4  iREG 21 = 37C0  should be 2600
!!!!!!! PWR_ALARM_Q5Q6  iREG 22 = 3D70  should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER  iREG 23 = 3970  should be 8000
!!!!!!! RING_TRIP_FILTER  iREG 24 = 78E0  should be 320
!!!!!!! TERM_LP_POLE_Q1Q2  iREG 25 = 8B60  should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4  iREG 26 = 6A40  should be 100
!!!!!!! TERM_LP_POLE_Q5Q6  iREG 27 = 8070  should be 10
!!!!!!! CM_BIAS_RINGING  iREG 28 = FFFF  should be C00
!!!!!!! DCDC_MIN_V  iREG 29 = FFFF  should be C00
!!!!!!! DCDC_XTRA  iREG 2A = FFFF  should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW  iREG 2B = FFFF  should be 1000
 !!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Module 0: FAILED FXS (FCC)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules)

Does this have to do with the fact that the module is way newer than the card?

TIA
C F

On 2/21/11 4:46 PM, C F wrote:
> I just installed an FXS module onto a 4 channel tdm thats about 5
> years old and it wont work. Running dmesg I can see the following
> error:
>
> Zapata Telephony Interface Registered on major 196
> Freshmaker version: 71
> Freshmaker passed register test
> !!!!!!! LOOP_CLOSE_TRES  iREG 1C = 1  should be 1000
> !!!!!!! RING_TRIP_TRES  iREG 1D = 8000  should be 3600
> !!!!!!! COMMON_MIN_TRES  iREG 1E = 0  should be 1000
> !!!!!!! COMMON_MAX_TRES  iREG 1F = 0  should be 200
> !!!!!!! PWR_ALARM_Q1Q2  iREG 20 = 1480  should be 7C0
> !!!!!!! PWR_ALARM_Q3Q4  iREG 21 = 37C0  should be 2600
> !!!!!!! PWR_ALARM_Q5Q6  iREG 22 = 3D70  should be 1B80
> !!!!!!! LOOP_CLOSURE_FILTER  iREG 23 = 3970  should be 8000
> !!!!!!! RING_TRIP_FILTER  iREG 24 = 78E0  should be 320
> !!!!!!! TERM_LP_POLE_Q1Q2  iREG 25 = 8B60  should be 8C
> !!!!!!! TERM_LP_POLE_Q3Q4  iREG 26 = 6A40  should be 100
> !!!!!!! TERM_LP_POLE_Q5Q6  iREG 27 = 8070  should be 10
> !!!!!!! CM_BIAS_RINGING  iREG 28 = FFFF  should be C00
> !!!!!!! DCDC_MIN_V  iREG 29 = FFFF  should be C00
> !!!!!!! DCDC_XTRA  iREG 2A = FFFF  should be 1000
> !!!!!!! LOOP_CLOSE_TRES_LOW  iREG 2B = FFFF  should be 1000
>   !!!!! Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
> !!!!!!! LOOP_CLOSE_TRES  iREG 1C = 1  should be 1000
> !!!!!!! RING_TRIP_TRES  iREG 1D = 8000  should be 3600
> !!!!!!! COMMON_MIN_TRES  iREG 1E = 0  should be 1000
> !!!!!!! COMMON_MAX_TRES  iREG 1F = 0  should be 200
> !!!!!!! PWR_ALARM_Q1Q2  iREG 20 = 1480  should be 7C0
> !!!!!!! PWR_ALARM_Q3Q4  iREG 21 = 37C0  should be 2600
> !!!!!!! PWR_ALARM_Q5Q6  iREG 22 = 3D70  should be 1B80
> !!!!!!! LOOP_CLOSURE_FILTER  iREG 23 = 3970  should be 8000
> !!!!!!! RING_TRIP_FILTER  iREG 24 = 78E0  should be 320
> !!!!!!! TERM_LP_POLE_Q1Q2  iREG 25 = 8B60  should be 8C
> !!!!!!! TERM_LP_POLE_Q3Q4  iREG 26 = 6A40  should be 100
> !!!!!!! TERM_LP_POLE_Q5Q6  iREG 27 = 8070  should be 10
> !!!!!!! CM_BIAS_RINGING  iREG 28 = FFFF  should be C00
> !!!!!!! DCDC_MIN_V  iREG 29 = FFFF  should be C00
> !!!!!!! DCDC_XTRA  iREG 2A = FFFF  should be 1000
> !!!!!!! LOOP_CLOSE_TRES_LOW  iREG 2B = FFFF  should be 1000
>   !!!!! Init Indirect Registers UNSUCCESSFULLY.
> Indirect Registers failed verification.
> Module 0: FAILED FXS (FCC)
> Module 1: Installed -- AUTO FXO (FCC mode)
> Module 2: Installed -- AUTO FXO (FCC mode)
> Module 3: Installed -- AUTO FXO (FCC mode)
> Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules)
>
> Does this have to do with the fact that the module is way newer than the
card?
>
Not having much direct experience with the wctdm.c driver, that would be 
my guess. You might be able to edit the wctdm_proslic_insane() function 
to force the FLAG_3215 on for the card and see if that gives you a 
different result.

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org

How/Where would I do that?

TIA
CF

On Mon, Feb 21, 2011 at 11:23 PM, Shaun Ruffell <sruffell at digium.com>
wrote:
> On 2/21/11 4:46 PM, C F wrote:
>>
>> I just installed an FXS module onto a 4 channel tdm thats about 5
>> years old and it wont work. Running dmesg I can see the following
>> error:
>>
>> Zapata Telephony Interface Registered on major 196
>> Freshmaker version: 71
>> Freshmaker passed register test
>> !!!!!!! LOOP_CLOSE_TRES ?iREG 1C = 1 ?should be 1000
>> !!!!!!! RING_TRIP_TRES ?iREG 1D = 8000 ?should be 3600
>> !!!!!!! COMMON_MIN_TRES ?iREG 1E = 0 ?should be 1000
>> !!!!!!! COMMON_MAX_TRES ?iREG 1F = 0 ?should be 200
>> !!!!!!! PWR_ALARM_Q1Q2 ?iREG 20 = 1480 ?should be 7C0
>> !!!!!!! PWR_ALARM_Q3Q4 ?iREG 21 = 37C0 ?should be 2600
>> !!!!!!! PWR_ALARM_Q5Q6 ?iREG 22 = 3D70 ?should be 1B80
>> !!!!!!! LOOP_CLOSURE_FILTER ?iREG 23 = 3970 ?should be 8000
>> !!!!!!! RING_TRIP_FILTER ?iREG 24 = 78E0 ?should be 320
>> !!!!!!! TERM_LP_POLE_Q1Q2 ?iREG 25 = 8B60 ?should be 8C
>> !!!!!!! TERM_LP_POLE_Q3Q4 ?iREG 26 = 6A40 ?should be 100
>> !!!!!!! TERM_LP_POLE_Q5Q6 ?iREG 27 = 8070 ?should be 10
>> !!!!!!! CM_BIAS_RINGING ?iREG 28 = FFFF ?should be C00
>> !!!!!!! DCDC_MIN_V ?iREG 29 = FFFF ?should be C00
>> !!!!!!! DCDC_XTRA ?iREG 2A = FFFF ?should be 1000
>> !!!!!!! LOOP_CLOSE_TRES_LOW ?iREG 2B = FFFF ?should be 1000
>> ?!!!!! Init Indirect Registers UNSUCCESSFULLY.
>> Indirect Registers failed verification.
>> !!!!!!! LOOP_CLOSE_TRES ?iREG 1C = 1 ?should be 1000
>> !!!!!!! RING_TRIP_TRES ?iREG 1D = 8000 ?should be 3600
>> !!!!!!! COMMON_MIN_TRES ?iREG 1E = 0 ?should be 1000
>> !!!!!!! COMMON_MAX_TRES ?iREG 1F = 0 ?should be 200
>> !!!!!!! PWR_ALARM_Q1Q2 ?iREG 20 = 1480 ?should be 7C0
>> !!!!!!! PWR_ALARM_Q3Q4 ?iREG 21 = 37C0 ?should be 2600
>> !!!!!!! PWR_ALARM_Q5Q6 ?iREG 22 = 3D70 ?should be 1B80
>> !!!!!!! LOOP_CLOSURE_FILTER ?iREG 23 = 3970 ?should be 8000
>> !!!!!!! RING_TRIP_FILTER ?iREG 24 = 78E0 ?should be 320
>> !!!!!!! TERM_LP_POLE_Q1Q2 ?iREG 25 = 8B60 ?should be 8C
>> !!!!!!! TERM_LP_POLE_Q3Q4 ?iREG 26 = 6A40 ?should be 100
>> !!!!!!! TERM_LP_POLE_Q5Q6 ?iREG 27 = 8070 ?should be 10
>> !!!!!!! CM_BIAS_RINGING ?iREG 28 = FFFF ?should be C00
>> !!!!!!! DCDC_MIN_V ?iREG 29 = FFFF ?should be C00
>> !!!!!!! DCDC_XTRA ?iREG 2A = FFFF ?should be 1000
>> !!!!!!! LOOP_CLOSE_TRES_LOW ?iREG 2B = FFFF ?should be 1000
>> ?!!!!! Init Indirect Registers UNSUCCESSFULLY.
>> Indirect Registers failed verification.
>> Module 0: FAILED FXS (FCC)
>> Module 1: Installed -- AUTO FXO (FCC mode)
>> Module 2: Installed -- AUTO FXO (FCC mode)
>> Module 3: Installed -- AUTO FXO (FCC mode)
>> Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules)
>>
>> Does this have to do with the fact that the module is way newer than
the
>> card?
>>
>
> Not having much direct experience with the wctdm.c driver, that would be my
> guess. You might be able to edit the wctdm_proslic_insane() function to
> force the FLAG_3215 on for the card and see if that gives you a different
> result.
>
> --
> Shaun Ruffell
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> ? ? ? ? ? ? ?http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> ?http://lists.digium.com/mailman/listinfo/asterisk-users
>

This worked.
Thank you all for your help.

On Wed, Feb 23, 2011 at 1:42 PM, Greg Woods <greg at gregandeva.net>
wrote:
> On Wed, 2011-02-23 at 09:56 -0500, C F wrote:
>> This is the closest thing I was able to find in my wctdm.c file:
>> ? ? ? ? if ((blah & 0xf) == 2) {
>> ? ? ? ? ? ? ? ? /* ProSLIC 3215, not a 3210 */
>> ? ? ? ? ? ? ? ? wc->flags[card] |= FLAG_3215;
>> ? ? ? ? }
>> If I take out the 2 first lines I get errors when compling.
>
>
> Maybe you need to remove the closing brace too?
>
> --Greg
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> ? ? ? ? ? ? ? http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> ? http://lists.digium.com/mailman/listinfo/asterisk-users
>