similar to: Aastra phones and park/pickup feature

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

I've got a problem that keeps popping up with my reception phone. It is a IP 650 and the receptionist - on three occassions - has accidentally hit the "Forward" softkey just before she enters the "Page All" keystrokes and then all future calls get routed as an overhead page. I will admit, the first time it happened, I was totally stumped. Why the heck did I have

Is there any way to program a soft key in ADSI to put a caller on hold. Then able to retreive that caller. Example - Softkey Hold Softkey Retreive Call Softkey End Call -gcc

I found on the web that there is way to customize the softkeys for the 7941/7961 phones. In the SEP<mac>.xml there is a section called "softKeyFile" where you can specify an xml file for the softkeys. I couldn't find any examples of this softkey file or the format to this file. Does anyone have a call manager enviroment where they can look at this file and send me an

Can anyone point me to info on how to change the functionality of the SIP (7.4) 7960's. We previously had an SCCP firmware on the phone and the users want the phone to work like it used too. Here are some examples: The users do not want to push the new call softkey or the speaker button in order to dial a call. They want to be able to just begin dialing the number. The users do not want

Hey Everybody, You may remember be as the one that was generally running in circles trying to get ADSI phones to work? Well, five phones later, I've got a phone and a code that works to program it. I have been discouraged from just posting it to an e-mail forum, but I have been encouraged to get it embedded in the program. Is this possible? How should it be done? Next, after getting it

Has anyone gotten one-touch call parking to work on Polycom phones via the Enhanced Feature Keys feature working? I've looked at various examples, they appear correct, but the phones (501, 3.1.x firmware) show the Park button while in a call but this does not actually cause the call to be parked. Doing a SIP debug, I don't see that anything is transmitted as a result of pressing the call

We upgraded to Asterisk 1.4.13 earlier this week, and now an odd problem has cropped up with our Polycom phones. Basically, performing a transfer via the transfer softkey fails on transfers to extensions beginning with a *. When you try, you just get a fast-busy, and next to nothing on the console (usually a message about the peer being unable to authenticate) This is only affecting

I have a Cisco 7960 running 7.2 of their SCCP image; I am running Asterisk 1.0.5 and using the latest Sourceforge version of SCCP2. When I make a call (or receive one) the "Transfer" softkey does not show up - as a matter of fact only 2 softkeys show up (redial & something else), but those even are not active. On a 7960 running SIP the Transfer and other buttons do show up and are

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

I am working with the telantek.adsi file, and I was wondering how I would create a softkey for Transfer. I tried making a key definition and using SENDDTMF "#", but that didn't work. Is there another way I could do this? Also, does anybody have any ADSI scripts for use with Asterisk that they would like to share? Thank you for your time. __________________________________ Do you

I don't know if Polycom decided to change their policy or not, but I just went to their website and when you click on the downlooad link, it will now present you with an option to join their extranet. I did that and I got the following message immediately: <snip> Access to certain Resource Center sections and content are subject to approval. Eligible members, will receive further

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Hi, I'm a Polycom user who have just been trying out the Aastra phones. I`ve run into a bit of an issue. I cannot configure the voicemail dialout correctly on one of the two phones I am using, even if the documentation seems to state that it should work in the same manner on both phones. I have both a 9143i and a 57i CT. I`ve set both up with provisioning from config files. Both

Greetings, Has anyone noticed that attempting to place a call from the "Placed Calls" list on a Polycom IP501 by pressing the 'Dial' softkey sometimes simply returns the phone to the idle screen? It is not related to the number being dialed, as we have observed two entries for the same number, one of which worked and the other didn't. We've experimented with calls

Has anyone been able to do the following: 1. Set the phone to automatically record all calls to the USB stick, now you have to press three keys. 2. Put Record on the main screen when a call is active. This would eliminate having to press the 'more' softkey. Thanks, Matt

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

I'm in the process of converting our current hybrid key system to Asterisk and Aastra 57i phones. One of the features that seems to be a show stopper for almost everyone in the office is the inability to see who is on the phone. Can someone point in the right direction to setup an XML app on the phone so they can press a soft-button and get a list of extensions and their statuses? I know I can

When I want to pick up a ringing line, I dial *8 and hit New Call softkey on my Poly 501. For some reason, if I pick up the hand set and dial *8, it seems to ignore or drop the 8 digit. I've confirmed that this happens with all of my 12 Polycom 501s. Does anyone know what would cause this or how to fix it? Craig Bruenderman Network Advocates, Inc. 300 Envoy Circle Suite 300 Louisville, KY