similar to: dealing with blind transfers to invalid extensions

Hey guys, I have stdexten macro dialplan and I have to handle those who doesn't have voicemail box setup. Right now if someone call and if person unavailable the it's just hangup that call. I want it say "person doest have vm setup yet." smthing like that. How should I handle this in my dialplan ? -- Sent from my iPhone

I've got a setup where we have 100 DID's. Our default dialplan has one line that calls a macro: exten => _22XX,1,Macro(STDEXT,${EXTEN}) The macro is pretty basic: [macro-STDEXT] exten => s,1,NoOp exten => s,2,Dial(SIP/${ARG1},15,Tt) exten => s,3,Goto(s-${DIALSTATUS},1) exten => s-NOANSWER,1,Voicemail(${ARG1}|u) exten => s-NOANSWER,n,Hangup exten =>

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

Running Asterisk 1.2.9. I just installed a TE110P card and configured zaptel.conf & zapata.conf. The config files look right to me but I'm getting the following error when trying to start asterisk: Asterisk died with code 1. Automatically restarting Asterisk. Does anyone have any idea what is wrong with this configuration?? Thanks in advance!!! Here's my config files: zaptel.conf

Does anyone know if sip phones from any of the major IP phone vendors support 802.1x authentication? Any feedback would be greatly appreciated. Thanks in advance. ====================== Jeronimo Romero EUS Networks Email: jromero at euscorp.com Cell: 917-332-7238 Office: 212-624-5943 Web: www.euscorp.com ====================== -------------- next part -------------- An HTML

--> Perhaps someone can share how? First you need to give them the option of turning the feature on and off. I do it with the following: [callback-activate] ; *********************************************** ; Callback activate/deactivate. If this function ; is enabled and there is a call file in the form ; of ${EXTEN}.call, then Asterisk will call the ; phone number contained within the

I looked on the voip-info wiki and found sparse and conflicting information on how to do this with Asterisk... My incoming lines are all on Zaptel. Is there a simple why to implement a '*363" (do not disturb) toggle via the dialplan? It would be nice to be able to pick up an extension, dial *363, and have all calls sent to voicemail without ringing the extensions. Doing it again would

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

I'm running Asterisk 1.2.8 with Polycom ip501's xten softphones The only problem I'm experiencing is the following: I can't seem to get blind transfers to work with my Polycom 501 phones Either through the feature code or the soft keys. Feature code blind transfers: I set up a feature map in features.conf like this: blindxfer => # This works for all my

We are doing a medium sized office in NYC with 80 phones. The customer originally requested Polycom 601 phones. The COO also authorized us to purchase 2 Grandstream GXP2000 phones for the mail room. We find these phones much easier to configure and work with asterisk . They support BLF & intercom right out of the box. They can also be centrally managed and provisioned. They also sound great

Crikey. I can't get this to work! Allegedly, you can press 0 while in the voicemail greeting and be dropped to the 'o' extension. For some reason, I can't get it to work. The 'docs' aren't clear about what context the o extension should be in. The voip wiki says "the context for the voicemail box that we're looking for in the dialplan for the jump to the

[priv] type=friend dbsecret=dundi/secret context=longdistance Hope this helps, in your case Dundi will save you a world of work on configuring that many systems, in fact if you structure Dundi like spokes around a small number of master servers, the config gets real easy.Let me know how it goes. On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote: > > > >

I'm wondering if the SIP header join, RFC 3911, is supported in the asterisk stack? -- ***************************** Bruce Reeves, dCAp EUS Networks Office: 212-624-5943 Web: www.euscorp.com ****************************

Is there any technical difference between a T1 cable and a cat5e patch cable as far as using them with Digium T1/E1 cards? Can PRI circuits terminating at a smart jack connect successfully to Digium cards using straight through CAT5e cables? If so, are they using all of the pins in the cable? Thanks in advance

[priv] type=3Dfriend dbsecret=3Ddundi/secret context=3Dlongdistance Hope this helps, in your case Dundi will save you a world of work on configuring that many systems, in fact if you structure Dundi like spokes around a small number of master servers, the config gets real easy.Let me know how it goes. On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote: > > >

Hi, I was planning on getting a Dell PowerEdge 2950 for our new Asterisk configuration. But while searching for documentation about it and/or reported issues, I found this: http://www.voip-info.org/wiki/view/Asterisk+hardware WARNING - many Dell motherboards use the e1000 gigabit ethernet chipset, which has been known to cause random locksup - if you plan on using a Dell server, disable the

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

Hi List, Does anyone know of a good dual wan router that can handle SIP well and can failover between connections if there is a SIP issue on one of the lines (meaning there still is a connection however there isnt enough bandwith or sip packets arent going thru etc.) ? Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

please help!!! I am dialing into our asterisk server(TDM400p) from the psnt. I hear our voicemail message and I press the extention 1000. The Polycom ip phone in the office rings. I pickup but neither side can hear one another. What have I done wrong? thanks sip.conf: [general] context=local-access ; Default context for incoming calls bindport=5060

Hi All, I am trying to implement ACD using Asterisk 1.2.18 and I've chosen AgentCallbackLogin for login purpose. One AGI is written which will actually get executed when agent dials '1001' (say) from his SIP phone and enters into the queue. Second AGI gets executed when the Dial operation is performed. I see the agi_uniqueid obtained from both AGI instances are different and I