asterisk users - Feb 2007 - TE110P: Error ==> Asterisk died with code 1.

Running Asterisk 1.2.9. I just installed a TE110P card and configured
zaptel.conf & zapata.conf. The config files look right to me but I'm
getting the following error when trying to start asterisk:

Asterisk died with code 1.
Automatically restarting Asterisk.

Does anyone have any idea what is wrong with this configuration??
Thanks in advance!!!


Here's my config files:

zaptel.conf

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us

Zapata.conf

[channels]
context=from-pstn
switchtype=national
signalling=pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
rxgain=0.0
txgain=0.0
immediate=yes
group=0
signalling=pri_cpe
context = from-pstn
channel =>1-23

=====================Jeronimo Romero
EUS Networks
Email: jromero@euscorp.com
Cell: 917-332-7238
Office: 212-624-5943
Web: www.euscorp.com
======================

Jeronimo Romero wrote:
> Running Asterisk 1.2.9. I just installed a TE110P card and configured
> zaptel.conf & zapata.conf. The config files look right to me but
I'm
> getting the following error when trying to start asterisk:
>
> Asterisk died with code 1.
> Automatically restarting Asterisk.
>
> Does anyone have any idea what is wrong with this configuration??
> Thanks in advance!!!
>
>
> Here's my config files:
>
> zaptel.conf
>
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
> loadzone=us
> defaultzone=us
>
> Zapata.conf
>
> [channels]
> context=from-pstn
> switchtype=national
> signalling=pri_cpe
> rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> echocancel=yes
> rxgain=0.0
> txgain=0.0
> immediate=yes
> group=0
> signalling=pri_cpe
> context = from-pstn
> channel =>1-23
>
> =====================> Jeronimo Romero
> EUS Networks
> Email: jromero@euscorp.com
> Cell: 917-332-7238
> Office: 212-624-5943
> Web: www.euscorp.com
> =====================>
>   
tail /var/log/asterisk/full will give you good insight.

Thanks,
Steve

On Tue, Feb 27, 2007 at 08:01:41PM -0500, Jeronimo Romero
wrote:
> Running Asterisk 1.2.9. I just installed a TE110P card and configured
> zaptel.conf & zapata.conf. The config files look right to me but
I'm
> getting the following error when trying to start asterisk:
> 
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> 
> Does anyone have any idea what is wrong with this configuration??
> Thanks in advance!!!
What is the output of:

  cat /proc/zaptel/*

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir

Thank you all. Was a signaling issue. 

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir
Cohen
Sent: Wednesday, February 28, 2007 12:55 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] TE110P: Error ==> Asterisk died with code
1.

On Tue, Feb 27, 2007 at 08:01:41PM -0500, Jeronimo Romero
wrote:
> Running Asterisk 1.2.9. I just installed a TE110P card and configured
> zaptel.conf & zapata.conf. The config files look right to me but
I'm
> getting the following error when trying to start asterisk:
> 
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> 
> Does anyone have any idea what is wrong with this configuration??
> Thanks in advance!!!
What is the output of:

  cat /proc/zaptel/*

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

On Wed, Feb 28, 2007 at 10:47:48AM -0500, Jeronimo Romero
wrote:
> Thank you all. Was a signaling issue. 
And for the benefit of those who will read the archive: how have you
debugged it? how have you resolved it?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir

The revision on this card was new and my version of zaptel (1.2.11) did
not support my pri signaling for that card. I upgraded zaptel through
svn and all was good. 

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir
Cohen
Sent: Wednesday, February 28, 2007 12:01 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] TE110P: Error ==> Asterisk died with code
1.

On Wed, Feb 28, 2007 at 10:47:48AM -0500, Jeronimo Romero
wrote:
> Thank you all. Was a signaling issue. 
And for the benefit of those who will read the archive: how have you
debugged it? how have you resolved it?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users