similar to: Taking a Polycom IP601 home

Are all of the sip phones in the same context? > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Robert Jenkins > Sent: Tuesday, January 16, 2007 1:44 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: [asterisk-users] Polycom IP601 - some hints working,

I was reading a Polycom brochure and it appears that there is really no special receptionist console and the console is basically a IP601. Is this correct? The only difference is to purchase an expansion module in order to have more shortcut keys for the girls. So, apart from the hardware, as far as the dialplan is concerned, do I just treat the receptionist console as any other extension? Are

All, Slightly off topic. Polycom released their SIP software version 1.6.6 for their phones recently. I was under the impression that this release fixed a previous limitation where the phones would only watch 7 buddies, ie send 7 sip subscriptions to Asterisk. I have configured a phone directory to watch 30 or so appearances, and it still seems to only be sending 7 subscriptions to Asterisk.

One more Polycom IP601 question please (sorry for the long intro here to document) ... In order to closely approximate the behavior of the previous telephone system that many of the users are familiar with, I have set up call parking like this: - features.conf [general] section contains: parkext => ** ; What extension to dial to park parkpos => 10-11 ; What

Hi, Returning to my office I find two "missed calls" (from autodialers) that my IP601 displays as originating from 01111111111. However the CDR database recorded the call this way: calldate: 2008-04-04 14:18:16+02 clid: 0172752780 src: 0172752780 dst: 2131 dcontext: default channel: Zap/1-1 dstchannel: SIP/0146472131-007a7e80 lastapp:

Depends what you want to do! Do you want to do VoIP over that T1 to a provider or IP telephones? Do you want to hook up to the PSTN through that T1 as 24 voice channels, through a T1 card on your asterisk? If you want to use the T1 as 24 voice channels, the Telco is going to have to re-provision the T1 as a voice T1, because currently, presumably it is one big channel of data. You could have

Hello people, I am having difficulties figuring out the POE power draw in watts from a Polycom IP601. I want to know how many IP601's can be powered from the Cisco Catalyst 3560G-48PS. The IP601 wallwart has: Input 120VAC 60hz 19W, Output 24VDC 500mA. I assume the output is appropriate value to figure out how many phones can be powered. The Cisco 3560 datasheet says "the 48-port PoE

Hi everyone, I have a user that needs a little extra volume on his Polycom IP 601 phone set for all calls (beyond what the volume control currently offers). Is there a provisioning setting for this anywhere? (I'd like to avoid a separate amplifier between the phone and handset if possible.) Alternatively, is there a way to have Asterisk 1.4.x boost the volume to a particular SIP device

Hi Polycom experts, I'm having a problem getting changes to the Polycom IP 601's (mac)-directory.xml file to update the button list on the phone. If the phone is newly provisioned (i.e. if I "Format File System" on the phone) then the new list will show up on the buttons, but of course this is pretty drastic way to do it. - Environment: Asterisk test setup with 7 phones,

I'm having a problem with polycom ip601. If I Dial() directly eg Dial(SIP/4000) it works perfectly. The polycom rings, and stops ringing as soon as I hang up. But if the phone is called via a queue, the polycom continues to ring long after I've hung up. Other phones in the queue (grandstream, cisco) don't have this problem, and stop ringing properly when I hang up. polycom bug

Hey everyone, I haven't seen an issue quite like mine, so I am hoping anyone who used the Polycom 601's may have an idea. We are going to be switching our office over to Asterisk. All the phones are going to be 601's, I am going to set up a boot server, but for now I am just going to test everything on one phone. My question is I have the phone registered in Asterisk (phone icon

Calling all Polycom gurus: I am using Polycom IP601 phones with Asterisk 1.4.21.2 In all Polycom phones, I set the following in sip.cfg. <dialplan dialplan.impossibleMatchHandling="2"> </dialplan> (I leave the digitmap unchanged because I thought setting impossibleMatchHandling will ignore the bitmap) ...so that I could dial any number by entering a variable-size

How do you disable call waiting on Polycom IP601 phones? I've looked through the user and admin guides and can't see anything about disabling it. -Dan

Hey list, Im in this HUGE crisis. Im trying to get a Polycom 601 with two expansion modules to work. I need the XML config files I guess. Does anyone have these I can have? Im trying to get this phone up and running, and haveing MUCHO problems, can someone help me out!! Im sure if I see the configs I can see how it works, just need those XML files!! The ones from the 501 that I have dont seem to

I am working on Polycom IP601 console with expansion module. I want to put on the BLF (busy lamp field) feature on all the contact/speed dial names I put on the console but I could not get it to work. *CLI> core show version Asterisk 1.4.13 built by root @ hostname on a i686 running Linux on 2007-11-20 05:26:15 UTC *CLI> sip show subscriptions Peer User Call ID

Has anyone ever gotten the Polycom Status feature, accessible via the 'MyStat' soft-key to work? When you change the status in this way, the phone does not send any communication to Asterisk, and it seems to have no effect in incoming calls. So... what's it for? Doug

Off topic. Anyone know where I can get Polycom SIP software v1.6.6, unofficially? Not that Polycom is analy retentive, or anything like that... Doug

Hi, I found your post on http://threebit.net/mail-archive/asterisk-users/msg04580.html I am having the exact same issue with the Polycom IP601 (SIP version 1.6.6.0036) with Asterisk 1.2.7.1. I was wondering if you found any solution to it. I would really appreciate if you could share your solution. Thanks, Khairul. BELOW, THIS WAS YOUR POST Polycom IP 601 Buddy Watch problems

Hello, Polycom ip soundpoint support ACD login/logout . Can we configure asterisk with polycom ACD support? Regards Harry ___________________________________________________________________________ Nouveau : t?l?phonez moins cher avec Yahoo! Messenger ! D?couvez les tarifs exceptionnels pour appeler la France et l'international. T?l?chargez sur http://fr.messenger.yahoo.com

I am trying to find out if Polycom (I am using IP601) can display the speed dial list using last name first instead of first name first. Currently, the speed dial list displays first name first. Thanks.