similar to: Digium TE210P and faxing, is it possible?

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

Hi all, My asterisk (1.2.4, zaptel 1.2.2) running in Dell PowerEdge 830 box is having problems with Digium TE210P card that I use for PRI connection. My problem is stability. Sometimes the box just boots OK with a full functionality, no problems at all, sometimes (after power outage) it halts during boot with the amber control LED flashing. Sometimes (most frequent scenario) it just boots OK and

I have a specific business problem that I'm hoping someone has ideas and/or has already worked out a solution. My application needs to be able to automatically create and issue faxes to many different fax machines. The volume is going to be very high. And it is only about sending faxes and not receiving them. My application is hosted by an ASP but the Linux (Fedora 2) server is

We performed a server hardware refresh recently here -- went PCI-x, and now I have 4 extra PCI interface cards that I'd like to find a good home for. These have been extremely solid cards, all of them also have the hardware echo cancellation modules. http://www.voipsupply.com/dgm-te210p Please contact me off-list if interested! -- Mahlon E. Smith http://www.martini.nu/contact.html

Hi list! Has anyone ever tried the following installation : I want to replace our legacy PBX with Asterisk but... I still need the legacy PBX as a 'channel bank' for fax (I need E1 not T1) I will put a dual port PRI card in the Asterisk box, and for incoming and outgoing faxes I want to use native bridging on the TE210P and route fax calls (based on DID and prefix when dialling) to /

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Hi all, I'm going to configure a middle asterisk installation. I'll use a TE210P to connect a T1 channel bank and a PRI E1 line. I'm thinking on using a SuperMicro P8SCT Mother Board that has a 1x 64-bit 133MHz PCI-X 3.3V. In TE210P documentation I've read: The TE210P is a 32-bit 33MHz card keyed for 3.3 volt operation. Can SuperMicro slot (that is a 133Mhz slot) be used

List, how can I put fax server functionality on Asterisk? * as a reliable fax server for 500-1000 fax/day (mostly incoming)? Fax server should be like HylaFax, i.e. stable, low maintenance and functionality like receiving fax as email with PDF attachment, sending faxes per WHFC. Faxing with spandsp using bri_stuff (BeroNet/Junghanns quadBRI ISDN cards) shortens some faxes, or faxes loose lines,

Hello, I have been struggling with the configuration of this card on my box. I have a T1 line and I am trying to setup asterisk with it. I followed all the instructions and I still see a blinking red light on the card. I use fedora 12. If everything is fine should I see a green line when I plug in the T1 line ? I want to isolate the issue so I di not start asterisk. When I run asterisk I get

Hi all, I have just setup a trixbox system and I am implementing hylafax/iaxmodem solution for the faxing. When i send a fax to it by phoning in listening to the IVR and manually pressing start to initate the fax, the call gets picked up correctly as a fax and everything works well. When I try sending a fax by entering the phone number and pressing start to initiate dialing it sounds like

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

Thanks James, What i need is to make the fax machines connected to the audiocodes mediant 1000 be able to send and receive fax throught Asterisk (connected to a pri) I know it's not reliable, but it should work at leaste, what should i do on Asterisk and Mediant to make this work? Im quite confuse with all these fax issues :S Thanks in advance > > Message: 11 > Date: Fri, 9 Apr

This is what you show CBeyond. You have some vouchers there from CBeyond that will allow me to get paid from them not you. Chuck Coleman President CCI Technologies/CC Call Center/CSI Technologies Director of Managed Services for Gurus2go Cell 510-439-6501 Confidential Email: This email and any files transmitted with it are confidential and intended solely for the use of the individual or

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am stuck in a situation where I have two te110p's and really need a te210P. Anyone interested in a trade? They are in working condition guaranteed. If this is the wrong forum for this, I am sorry... I will take it off list. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (MingW32) Comment: Using GnuPG with Thunderbird -

Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my

Has anyone every attempted to set up a mini PC to achieve much the same functionality as the fonebridge box? The sort of thing I'm imagining is a micro itx board & case in a completely solid state configuration (flash disk, maybe a psu fan but only if really required), with a TE210P (or equiv) card(s). The sole purpose of this would be to be a bridge between E1 lines and TDMoE. The

This probably came up before, but I have a faxing question for everyone. I have a simple extension setup to use rxfax to receive faxes sent to asterisk. It is: exten => s,1,Answer() exten => s,n,AbsoluteTimeout(300) exten => s,n,Set(FAXFILE=/var/spool/asterisk/fax/${ARG1}_${CALLERIDNUM}_${UNIQUEID}.tif) exten => s,n,rxfax(${FAXFILE}) exten => s,n,System(/usr/bin/mailfax

I know it is possible for * to detect fax signal, however is it possible to pass the call to Hylafax? I guess hylafax (is on an external modem) would have to be connected to an internal extension, that part should be easy I guess. In the same way faxes going out would need to be pass over to a POTS outside line. I'm aware that * has a fax module but I like Hylafax fax-junk blocking

i sent a product suggestion to HP. It was a request to use software that already exists in their JetDirect and Multifunction Fax machines to make them seamlessly interoperate with a fax gateway in a way transparent to the end user. Essentially, giving the sysadmin a choice in fax transport mechanism to route all faxes over analog telephone transport or over the network. Thank you for taking

Dear all I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI asterisk think PRI_CPE and remote end also CPE i have configure /etc/zaptel.conf span=1,1,0,ccs,hdb3