Remco Barende
2006-Apr-24 03:38 UTC
[Asterisk-Users] Dreadful results from zttest with TE210P and Dell 2850?
Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my (huge) disappointment however the results from zttest are equally as bad as from my home box?? (just over 97.5) lspci -vb reveals that the card is sharing IRQ 3 with the second Gbit LAN controller. The box is only idling I'm the only user shh'ing into it. Does anyone have a clue why the results from zttest are this horrible? Looking at the wiki I don't even need to try and put the box into production with such results..... Thanks!
Craig Guy
2006-Apr-24 08:36 UTC
[Asterisk-Users] Dreadful results from zttest with TE210P and Dell2850?
Using an SMP kernel will fix the interrupt sharing, you could also disable hyperthreading and set runlevel 3. FWIW I almost exclusively use Poweredge 850 for my * servers with a third party sata raid controller if raid is required. Never had any problems. Craig ----- Original Message ----- From: "Remco Barende" <asterisk@barendse.to> To: "Asterisk Users List" <asterisk-users@lists.digium.com> Sent: Monday, April 24, 2006 6:38 PM Subject: [Asterisk-Users] Dreadful results from zttest with TE210P and Dell2850?> Hi list! > > I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm > using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. > > In a previous thread I read about the results I should expect from zttest. > On my home box (using the crappy Asus A7V600) I got really bad results > from zttest (just over 97.5) but I know that this motherboard just sucks. > > To my (huge) disappointment however the results from zttest are equally as > bad as from my home box?? (just over 97.5) > > lspci -vb reveals that the card is sharing IRQ 3 with the second Gbit LAN > controller. > > > The box is only idling I'm the only user shh'ing into it. > > Does anyone have a clue why the results from zttest are this horrible? > > Looking at the wiki I don't even need to try and put the box into > production with such results..... > > Thanks! > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >