asterisk users - Feb 2006 - TE210P mother board

Hi all,

I'm going to configure a middle asterisk installation. I'll use a TE210P
to
connect a T1 channel bank and a PRI E1 line.

I'm thinking on using a SuperMicro P8SCT Mother Board that has a 1x 64-bit
133MHz PCI-X 3.3V.

 

In TE210P documentation I've read:

The TE210P is a 32-bit 33MHz card keyed for 3.3 volt operation.

 

Can SuperMicro slot (that is a 133Mhz slot) be used for TE210P card ?

Does anybody have used this board with asterisk ? Has it any know
incompatibility ? (it uses IntelR E7221 chip set, Pentium 4 with
hypertrading)

Is anywhere some informations on tested motherboards other than
voip-info.org Asterisk Hardware page ?

 

Thank you,

 

            Simone

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060206/aab12047/attachment.htm

Phone Dev wrote:
> Can SuperMicro slot (that is a 133Mhz slot) be used for TE210P card ?
Yes. Digium PCI cards work in a PCI slot capable of 133MHz, but the 
cards operate at 33MHz and will slow down the PCI bus to that speed.