similar to: Question about Polycom SoundPoint 500

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

Hi We've setup an Asterisk PBX recently and I encountered the following problem: When [mac address]-registration.cfg file includes the FQDN of the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even try to) register with the Asterisk PBX unless the DNS (it asks) successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this happen to anyone else? PS - The

I have a Polycom Soundpoint IP 500 that I have been using with Asterisk for a few weeks. It has been working OK, no major problems other than a freeze up every now and then, until today. The power apparently went out last night and for some reason the phone appears to be working but I keep getting the following errors repeating over and over in my Asterisk log file (IP's X'ed out): Aug

I've got a couple Shoreline IP phones, their Shoreline model number is Shoreline IP 100. I believe this is actually a Polycom SoundPoint IP 300 phone. I believe the phone is using a MGCP stack. I want to use it for testing with Asterisk. 1. I suspect I need to re-image the phone to make it work with *. 2. How can I preserve the current image on the phone? 3. What is preferred image to use

I have an extension setup in my extensions.conf for hold music. ext. 600. If I pick up a phone (polycom soundpoint 300 sip) and dial extension 600 I hear the hold music playing. If I call another extension and pick it up and put the call on hold with the hold button on the phone I hear nothing at all. Does anyone have any experience with these phones and getting the hold button to work?

I'm attempting to set up my SoundPoint 501 with my Asterisk server. I've configured DHCP and TFTP and successfully updated both the BootRom and SIP application. I've also created a custom cfg file for this phone's MAC address and the settings seem to be taking just fine. I can see that the phone registers with my Asterisk server but 'sip show peers' reports that the phone

Hello all, I need the bootrom.ld file to set up some Polycoms I have Platform: Model=SoundPoint IP 330, Assembly=2345-12200-001 Rev=A I've publiched on my FTP files downloaded from http://support.polycom.com/PolycomService/support/us/support/voice/soundpoint_ip/soundpoint_ip330_320.html (3.2.3 combined and split zips) but my phones are still showing the message: "error, application is

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

Hello, I'm having issues with my phone Polycom sp450 not subscribing to Asterisk server. Asterisk server is fine, firewall is not the issue because a secondary phone is working fine, my connection to the server is fine too, any ideas or suggestions are welcome. -Motty -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to use a Polycom Soundpoint IP400 with my asterisk setup, and have been unable to find the proper firmware and application files to make it work. The phone can access the FTP server, and downloads the IP500/600 configuration files, but claims that the sip.ld file is larger than its file system. I can think of two possible ways to make this work. One is to find the IP400

I just got a Polycom soundpoint and I set it up using the phone and web based admin. I cant seem to figure out the config files and they are confusing me greatly and I dont have time for it :) Some things are odd, like on every reboot it seems the volume I set is reset? is there any way to fix that. And the ringer seems low. - Even all the way up Anyone willing to point out a good asterisk

This Polycom phone seems to be one of the best on the market for sound quality and features. I have seen on the list that some people have gotten the IP 600 to work with Asterisk. Does anyone have the details of how to get this working i.e. XML phone config files, and any thing else I might need to know. Thank You, Chad Cowan -------------- next part -------------- An HTML attachment

I bought a couple Polycom Soundpoint 300's, and have them working nicely with SIP... but I'd like to be able to do automatic config via FTP, but it requires some XML config files. The docs discuss them in detail, but I can't seem to d/l them from Polycom. [No, it doesn't appear to be on the CD that comes with the phone.] I've created an account at Polycom's tech support

Does anyone have the Admin password for the phone in order to change configuration Roman

hello, I try to set up two lines per ip 300 phone, registration is ok but i get Failure to authenticate 407 for subscribe. Anybody could help me to configure Asterisk in order to set instant message and presence ? I've tried with Ondo sip server it's ok ! Regards D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail

Hello! I am selling hardware I have been using in various Asterisk test installations. If you are interested in buying all or any of the following items please reply off list. I got a few * X100P clones * Sirrix PCI4S0 ISDN BRI cards (+ 1 Sirrix S0 voltage/power supply) * 1 Polycom Soundpoint IP 500 (+ Plantronics headset) * Conrad HFC-S cards to give away. Some of the pieces are unused,

We recently took a few Polycom Soundpoint IP 500 to test out in Asterisk environment. So far it has been good. Call Hold, Transfer, DMTF etc. However, I do notice every now and then the Polycom fails to register with Asterisk. Asterisk console outputs the following: Feb 3 13:02:32 WARNING[278546]: chan_sip.c:2365 __transmit_response: Unable to determine sequence number from '' Feb 3