similar to: Re: teliax [Was: LiveVoip is Bankrupt]

For outbound only, I have traditionally recommended VoipJet. They just recently has a spat of issues that seem to have resolved though. I am still using them via their east coast server and it seems to work quite well again. Cost is around 1.3 cents minute I believe. Use IAX and g711 for best quality to VoipJet. Thanks, Wiley -----Original Message----- From:

So far my experience with TOS has been that most of them are pretty odd. No one wants the liability of a stock trade gone foul or a call to the doctor that gets disconnected. Essentially, those things in the TOS are just a CYA. They are un-enforced but should someone decide to attempt to sue based upon a financial loss, the ITSP is covered. So, yep. That is weird but not unexpected. Heaven

One would assume they have better things to do as they are quite busy. I think this is just a proactive measure meaning they say you cannot do it upfront so that in the event of a problem, it was predeclared. As to the rest of the TOS, I could be wrong but I got the impression that the owner of VoipJet speaks English as a second language due to some email exchanges. If that is the case, the TOS

<For someone that places outbound calls only, in a fairly low volume, is there a recommendation for which one would be <best for me? <I have had continual audio trouble with LiveVOIP, though other services <(FWD) work fine, so I'd want something that has good audio quality. I will toss in my $0.02 and say that I have had good luck with Voxee, simple setup, good quality, not so

Hi, I am new to asterisk , i am getting the following error,& the /etc/zaptel.conf file entry is as follows defaultzone=us loadzone=us span=1,1,0,esf,b8zs,yellow bchan=1-23 dchan=24 Parsing '/etc/asterisk/zapata.conf': Found Jul 1 18:33:35 WARNING[16384]: chan_zap.c:664 zt_open: Unable to specify channel 1: No such device or address Jul 1 18:33:35 ERROR[16384]: chan_zap.c:5296

I agree with that fact the same questions get posted, but that problem is compounded by the fact the archives are not really searchable. If the were as lease some users would search. The archives need to be fully indexed. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of steve szmidt Sent: Monday, June 27, 2005

So it looks like Livevoip went Bankrupt ------------------------------------------- There is a Federal Court Order in place and has been since Friday early a.m. ALL Suppliers are now under a Court Order that prevents them from terminating any and all services to LiveVoip LLC. If they take such any action they will be in direct violation of a U.S. Federal Court Order. If you have any questions

I'm getting really wierd errors from them, like bad packet checksums: Jun 27 18:22:56 NOTICE[29051]: rtp.c:435 ast_rtp_read: RTP: Received packet with bad UDP checksum - a -- "I didn't see it then, but it turned out that getting fired was the best thing that could have ever happened to me. The heaviness of being successful was replaced by the lightness of being a beginner

Mike, No they have not. Calls are failing again today. They have offered to refund my money but that does not solve the problem. My asterisk server is only 4 to 12 ms away from their "network". I have had VERY good luck with nufone.(40 to 45ms away) Only have 1 or 2% fail rate. Going to be calling txlink.net on Monday. Seems that LiveVoIP does not care about asterisk users. They like

Receiving calls from LiveVoip DIDs results in dropped DTMF digits. I'm using SIP, not IAX, and I've tried this without a dtmfmode and with dtmfmode in all the various permutations. Note that LiveVoip does not instruct us to put any dtmfmod statement in. The server is set to do ulaw and I've verified that it is doing so. LiveVoip originally suggested that I go from IAX to SIP to

I have several DIDs (working well) with LiveVoip and I just signed up for some outbound minutes. Unfortunately they did not send connection instructions. I tried: exten => _1NXXNXXXXXX,2,Dial(IAX2/userid:password@217.160.244.186/${EXTEN}|60|s) but I get the error Feb 19 15:14:09 WARNING[21453]: chan_iax2.c:5546 socket_read: Call rejected by 217.160.244.186: No authority found --

I just signed up with livevoip for 800 DID and have very choppy audio. From PSTN to my asterisk is ok but asterisk to PSTN is terrible. I am using IAX and was assigned to server iax01.nyc.*. I do not believe it is a bandwidth problem on my end and I have no problems using iax with gafachi. I opened a ticket with livevoip but no response yet. Would I be better off using sip with them? Is there

A few months ago, the friendly folks from liveVOIP went under. We had some discussion on how to limit our losses, and my recommendation was a chargeback, since "FTTP Services" -- their CC merchant -- wasn't affected by the bankruptcy, as far as we could tell. Today, I received this from my CC company: http://muware.com/asterisk/livevoip.pdf Anyone else got lucky?

> You have been replied to - we do not use digital certs, we do not > reply when you have some sort of Spam blocker. This time I am > responding even though that is not policy. > It seems it is their policy not to answer. FYI info I tried to get an account with them a week ago. I did not get any information how to setup, just that they cashed my credit card. Several calls to them

Good evening all, hope everyone in the US had a nice Thanksgiving! On one of our internal servers, I decided to make the leap from 1.4.2x to 1.6.2.0-rc6 so I could start learning about the changes and new features that have been implemented. I upgraded all the configs, removed all the deprecated stuff, etc -- well went well. However, I noticed after the upgrade, when dialing into an

We are setting up asterisk with Teliax and having trouble getting the incoming call to work all the time, the outgoing does not seem to have a problem. I have worked with their support but since they say that we are getting the initial call to our server they want to charge to take a look. They did a tcpdump and we are seeing an attempt but no CLI most of the time. Some times we see this but it

Not to point the finger at Teliax, but I'm having some unique problems with their service that are as yet unexplained. Incoming calls are fine. Outgoing calls don't work, though they did at one time. As of today, I'm running the latest code from CVS. -- Called teliax/13143212222 -- Call accepted by 208.139.204.245 <http://208.139.204.245> (format ulaw) -- Format for call is

We are unable to call certain 800 numbers through Teliax but I thought I would post this here and see if anyone else had the same problem with either Teliax or other carriers. The 800 numbers causing problems pick-up the call right away and are in the US - American Airlines (8004337300) and Staples (800-378-2753) - we can call many other 800 numbers just fine. Our asterisk setup has a 4-port

I'm having trouble setting callerid with teliax. I use a simple dial-out subroutine to set the callerid depending on the calling extension, and then dial out. Teliax is saying they're not seeing any callerid info. [DialOut] ; subroutine for dialing out. exten => s,1,NoOp(Context: DialOut called with outgoing number ${ARG1} ) exten => s,n,NoOp(${CALLERID(num)}XXXX) exten =>

We have a Teliax IAX trunk that we use as an overflow for our four regular business lines into our local Asterisk PBX (Trixbox). We have our Teliax account set up so that it goes to a Teliax voicemail box if it cannot reach our Asterisk server, and we have the channel set up for 5 simultaneous connections. Occasionally, calls are sent to the Teliax voicemail box for no apparent reason. In