similar to: Unchanged sound through Asterisk

Hi, Anybody out there running Adit600s? I have in my care an Adit600 channel bank connected to an old (version 1.0.6) Asterisk instance with MGCP. When trying a more recent Asterisk (1.4.21.2~dfsg-3+lenny1, Stock current Debian) calls fail. I have attempted to add the "slowsequence = yes" line to mgcp.conf. (It seemed to be the only likely candidate in the example files I found

Hi, in following of a recent discussion I got to work on MGCP with the Cisco ATA186 again, and got it to work very nicely. However, there is a little thing with transfers I would like to get comments on: Call comes in from PSTN and goes to an ATA186 (MGCP) Call is answered and then, using flash, transferred to another extension If the extension is available, there can be an announcement and

Has anyone ever gotten an Adit 600 to work with Asterisk1.4 via MGCP. Asterisk keeps giving me the following error in the LOGs: [Jun 30 08:32:59] NOTICE[26785]: chan_mgcp.c:1726 find_subchannel_and_lock: Gateway 10.0.0.245' (and thus its endpoint '*') does not exist MGCP Config: [AFSWestAdit600] host = dynamic context = default canreinvite = no threewaycalling = yes

Hey guys, can you shead some light on this? I will copy my mgcp.conf and post below, but here is the problem. I can't get call waiting to work with my MGCP device. I already have one call going, and I can hear the second call come in, I flash over to it, but all I get is a dial tone, * puts the 1st call on mute/hold, but I never get the second, and it terminates. I flash back over and pick

Hello, I`m try to make the attended transfer work Dlink DG-104S via FLASH, when somebody calls my phone I pickup and press flash to get a second line to call another extension. When I press flash I hear no dialtone, and only a long and then small beep. When I try to dial digits I hear again those long+short beeps, but the extension dialed is not ringing. If I pres flash again I get back to

What server hardware would you recommend for an Asterisk system which are really critical? The additional hardware will probably be two digium TE110P cards, and an Adit 600 platform. If it's possible to run on -48VDC, It would be great! Are there any experiences with any HP or FujitsuSiemens systems? Or other "complete server" systems? Thanks! BR Daniel Nystr?m

Hi, I have some problems transfering call from phone to phone with my Asterisk. When I dial Flash I can hear for half a second the dial tone, but it stops suddenly. The other phone hear the on hold music and pressing flash key another time I get back to the previous channel. On the asterisk consolle seems to be all ok, this is whant I can read: asterisk1*CLI> -- Swapping 0 for 1 on

I've been reading the Google searches trying to understand how to tie together Adit 600 to Asterisk to provide 2 way service. I'm about blind from reading. I assume, the answer is using MGCP between the boxes. However, the examples I found don't really explain fully enough to know how to modify examples to work for me. I'll have in the ADIT with T1's. There is a CMG and

I had MCGP working to a ADIT 600 fine with debain sarge stable / asterisk stable - wanted to try red hat and got the below message - then I re-installed debian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below I go off hook

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 It seems like Asterisk are having problems detecting DTMF digits when using an Adit 600 channel bank via MGCP. I've tried to turn on RFC 2833 on both Adit and Asterisk, but no digits at all are working then. Anyone experienced simular with Adit or other channel banks? I'm also unable to use V.90 modem through my setup (Adit600 via MGCP -

I've finally got my Adit 600 and are configuring it right now. But I have to say, there aren't much documentation for it. I've setup MGCP and Asterisk seems to find it. But all channels (40 FXS channels) are "Down"! But the MGCP itself is "Up" according to the statistics. I can't find any documents how to set each channel to "Up" in the CLI. Any

Hi all, i am using CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a with Cisco ATA-186 3.1.1 atamgcp We are used to make an special ;) blind transfer like (Flash)Number(Hangup before anyone answers or ring). Then * crashes (see below) if the man in the middle is an cisco-ata-186-mgcp If one waits until the last one rings, then hangup, everything is fine. If one waits until the last one

Has anyone had any success using the Adit 600 with the CMG card talking MGCP to asterisk? I want to have a central asterisk server with 10 Adit 600's at various locations providing 24 FXS ports.... Thanks, Isaac

I have this idea to use an old ADIT 600 with a CMG card to convert two T1 TDM circuits to MGCP towards asterisk. The basics I've found on the net, but there is not much available. I've cut and pasted the mgcp.conf details I could find, but there not much as far as CMG setup. I was hoping I could hook-up with someone that's tried this so I could pick your brain about the finer

Hi All, I'm trying to hook up asterisk (CVS-HEAD-02/09/05-13:44:11 ) to a ADIT 600 via MGCP. Got it working really nice but now have a pretty bad problem: 1. When I perform a flash on the telephone, I usually get a second dialtone, but when I dial, dialtone doesn't break. If I flash back and forth a few times, it will eventually give me no dialtone.. here if I dial, it successfully

I've searched but can't find an answer as to how many MGCP paths can a single ADIT/CMG card support? It appears it's only 24 ports, maybe 48. What I'd like to do is install 6 Telco T1's into a single (or more) Adit 600 and route inbound calls towards asterisk. Can I have more than one CMG in a single chassis? Or maybe you know of a better way to connect T1's to

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Does anyone know what I need to put in the mgcp.conf to connect to an adit 600? Also if you know what I need to configure on the Adit600 itself, that would help too. - --Tod -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

I have an adit 600 with one fxo card connected to a Digium single span T1 card. CallerID, disconnect supervision work perfect, however the users complain that they have some sound quality issues, after testing it I realized that whenever one is in a phone call they get like silence between the sounds coming from the other party, almost like a cell phone, in other words if there is no sound coming

I'm emailing this as the customer in this case, since my carrier appears to be completely unable to solve this. A brief rundown of the problem: - We have several voice lines going through the ADIT, of course into a VoIP type of arrangement. - Voice traffic will become choppy, even drop calls completely, at random but quite often. Modem calls (which we needed unfortunately) are a joke. -