similar to: Some more hardware and E1 questions

What server hardware would you recommend for an Asterisk system which are really critical? The additional hardware will probably be two digium TE110P cards, and an Adit 600 platform. If it's possible to run on -48VDC, It would be great! Are there any experiences with any HP or FujitsuSiemens systems? Or other "complete server" systems? Thanks! BR Daniel Nystr?m

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

I've finally got my Adit 600 and are configuring it right now. But I have to say, there aren't much documentation for it. I've setup MGCP and Asterisk seems to find it. But all channels (40 FXS channels) are "Down"! But the MGCP itself is "Up" according to the statistics. I can't find any documents how to set each channel to "Up" in the CLI. Any

A little off-topic maybe, but it's still for the Adit used with Asterisk. ;) I wonder where I can buy 50 pin Amphenol cables, with connector on one side, and open cables on the other for mounting in our own patch panels. In Europe, or Sweden preferably. It's said to be very common on telcos, but I can't find it for sale anywhere! Thanks!

According to CarrierAccess, the Adit 600 uses CAS for voice signalling. What is this? This should not be a problem for Asterisk? Does the Asterisk server need to reencode CAS into aLaw when going to Euro ISDN? BR Daniel Nystr?m

Do anyone knows abount European resellers of these products: * Digium Wildcard TE410P * CarrierAccess Adit 600 Preferably in Sweden, but Europe is also better. Have anyone within EU ordered products from these companies directly from the US? In that case, how is the service and delivery? Thanks, folks!

Alle, I was wondering if anyone is using 4.X on any Fujitsu Primergy hardware and what type of experience they've had. I know that FJ provides separate drivers for all the supported hardware that are supposed to be RHEL4.X compatible, but I have my doubts. Best Regards, Camron Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu America, INC.

This is my first time setting up Asterisk in production and we are buying the Digium TE121-card for use with an ISDN-30 connection. We are considering buying a Fujitsu-Siemens Primergy TX200 S4 - http://www.fujitsu-siemens.com/products/standard_servers/tower/primergy_tx200s4.html - for handling the calls. Quad-Core Xeon, 2.5 GHz / 2 x 6 MB / 1333 Mhz. 2 GB RAM, 3.5" SATA II discs. I know this

Hi all, We have a problem with our system which is a Siemens PRIMERGY, 8xPentium III Xeon, 8GB Memory, 280GB HD, running as DB2 server. We have some kind of error message like below in /var/log/messages:

I cant make the nouveau work with an arcade monitor, problably because the EDID. I can make modeline work fine to reduce the horizontal to 15khz, tested in a normal pc monitor (with ugly visual because the 15khz in horizontal). But when i try in the arcade monitor, dont show any image after xorg start. In official nvidia driver has an option NOEDID to force the driver to ignore information from

hello, I try to use samba as PDC on NetBSD, but I 've had problem with that combination.. samba work perfectly..but if someone want to write into homedir, they couldn't, and w2k workstation appear message , that disk is full.. disk isn't full, and permission are set correct I don't know, where should be a mistake, I check configuration problably 100x, but I haven't found any

Hello, I don't have any experience with channel banks and would appreciate any feedback on my theory outlined below: We have a single T1 entering the building with channels 1-12 being voice lines and 13-24 being a 768k internet connection. This T1 terminates to an Adit 600 (T1-1). Here's what I know. Channels 11-12 go out the Adit 600's 25-pair connector to a wiring block (and

I've been reading the Google searches trying to understand how to tie together Adit 600 to Asterisk to provide 2 way service. I'm about blind from reading. I assume, the answer is using MGCP between the boxes. However, the examples I found don't really explain fully enough to know how to modify examples to work for me. I'll have in the ADIT with T1's. There is a CMG and

Where can I get E1 and/or Euro-ISDN specifications/data sheets? Are there specs for other E./G./Q./etc. protocols as well? Thanks!

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

Hi THere, sorry if this is a stupid question or does not belong to this forum. I''ve set my DEFROUTE=no in my ifcfg-ppp0 and when I bring the ppp0 up, it deletes my old default load balance routes which I do not want, as I just want the interface to be up, but not touching my default routes any advice Thanks SEW

Has anyone had any success using the Adit 600 with the CMG card talking MGCP to asterisk? I want to have a central asterisk server with 10 Adit 600's at various locations providing 24 FXS ports.... Thanks, Isaac

I know a few ppl have those CAC Adit 600's with t400 I can't seem to get my second span up on the T400 connected to the second spand on the adit (A:2) A:1 seems ok Can someone post they zaptel.conf span defintions And maybe a "print config" from the adit 600 cli I think my issue is timing srcs the coding, framing. bld out are all matched thx -------------- next part

Say I get an ADIT 600 with two FXS8A and one FXO8A from ebay. a. Is it good for Asterisk? b. How do I connect the extensions and lines to it? Do I need a special jack? Can I get that jack in every corner? c. where can I find help for configuring it? d. what kind of backup does it have? Does it need to be reconfigured after a power outage? Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd.

Hello, I am connecting Asterisk to an Adit 600 via a T100P. Unfortunately I am not able to get any lights on the T100P and the Adit 600 only shows red. I have already modprobed the t100p. Has anyone successfully connected these before? I've tried both a cross-over cable and a standard cat 5 cable, but I can't seem to get them to work. Any suggestions? Thanks! Craig