similar to: TE110P as E1

People on the list tend to think you can't make many cards work on a regular desktop. If you're willing to wait a couple of week I might have an answer for you. _____ From: Robert Augustyn [mailto:augustynr@yahoo.com] Sent: Saturday, December 11, 2004 7:13 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Will Adtran TSU 600 work with *?

Hi, I am connecting to the asterisk using asterisk -r command but I never get anything on the console? How can I enable it? Robert Btw: it is version 0.4

Hi all. I'm using a te110p in spain. ;zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 I'm getting problems dialing out through this span. ?How can I debug its behaviour? Thank you in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060404/70d2cb7f/attachment.htm

Hi, I am considering A101/102/104 cards for my asterisk installations. Has any of you used these or any Sangoma cards in such environment? Any thoughts? How do they stack up against Digium cards? Any input would be greatly appreciated. robert

Hi All, I have configure my Asterisk as follow (using Asterisk@home): [zaptel.conf] span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 loadzone = uk defaultzone=uk [zapata.conf] [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local internationalprefix=00 nationalprefix=0 usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley

Hello, I am looking at the Polycom phones. The ip600 has a very nice screen, is that the only real advantage over the ip500 and ip300.. Is it worth the extra dollars? Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au <blocked::mailto:Michael@ITMedic.com.au> http://www.ITMedic.com.au

Hi, I wonder if anyone is using Digium's TE110P card on an E1 connection. I have been try to, but so far it wasn't much of a success. It only works more or less in EuroISDN as PRI CPE. And even that config gives me some trouble with channel negotiation. My current config: *zaptel.conf:* span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=be defaultzone=be *zapata.conf:* [trunkgroups]

Hello, Has anyone Knowledge about softphone IAX for pocket PC totally free? Tkanks for all. -- Sandra Salmer?n Ntutumu <makevuy@ehas.org> Tlf. Analog: +34 914888405 / M?vil: 653574298 Tlf. IP desde FWD: 656212. Ext: 10 / Tel. IP desde EHAS: 010010 Fundaci?n EHAS: Enlace Hispanoamericano de Salud - www.ehas.org Telemedicina rural para zonas aisladas de pa?ses en desarrollo

We had added a lot to this release to our one button install of Asterisk. Now you can have even more features automatically installed and configured. Asterisk 1.0.7 AMP 1-10-007 Flash Operator Panel 0.20 Redesigned WebMeetme weather agi scripts Midnight Commander We have added some of our most requested features. - Web Meetme is now installed by default and the meetme2

Hi, Do you need a special cable and power for that unit or you can run it of PoE Switch? Thanks. robert

I want to buy a new server to run Asterisk and after looking at prices for the Athlon XP 3000+ it costs the same as an Athlon 64 at the same speed rating. I was wondering if Zaptel/Asterisk will compile/work on an Athlon 64? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V.

Hi, I want to reset IP600 to the factory settings but when I press 468* and hold it asks for password? Is there another way? Robert

Hi it's possible to use a Digium TE110P Single T1 / E1 PCI Interface for supply a E1 link to a old PABX ? Thanks

I am trying to use TE110p card for Euro ISDN with Ericsson AMS switch. I consistently get one of the following errors: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 or PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 My zaptel.conf file: -------------------------------- span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=us defaultzone=us

Hello, I've signed up for a NuFone account, and added the following instructions to my config files per NufFones directinos: iax.conf [NuFone] type=peer host=switch-1.nufone.net secret=password extensions.conf (under the [default] context) exten => _1NXXNXXXXXX,1,Dial,IAX2/f00b3r@NuFone/${EXTEN} I then get this message in the CLI: -- Executing Dial("SIP/jake-fe5d",

I have a couple of Polycom phones, bootrom 2.5.0, SIP 1.3.1.0056. Works great with Asterisk when I power on the phone. However, after some time, say an hour, I cannot receive calls on this phone. On Asterisk, when I do "database show", it does show the phone in there, but it cannot reach the phone. Is there a way to keep alive the connection with Polycom? Any suggestions? Thanks, --

hi eveybody, after many test with your help and the irc channels help, i get the led on TE110P green with this config: span=1,1,0,ccs,ami =====> alarms OK Green Led but the provider say that i have to set my span to this span=1,1,0,ccs,hdb3,crc4 =====> alarms: YEL/RED i can't make call's yet to test because they have to sync the Modulator in the other side so any remark? is my

Hello all. I have here a TE110P (configured as E1) and a TDM400P (with four X100P - FXS). Both boards are recognized by the operating system as showed above: 0000:08:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b1d9:0003 Flags: bus master, medium devsel, latency 64, IRQ 169 I/O ports at e800 [size=256]

Hi guys, I've been installing and configuring a TE110p card. The compile and install went very well. I'm using this on FC4 and I compile with linux26 as well checked I on the udev configs. zttool and ztcfg both indicate that the card is ready. But when I try to "load chan_zap.so" then I get the following Unable to load module chan_zap.so Jan 5 21:43:33 ERROR[6808]:

Hi!, this issue makes me crazy. I read a lot of docs, also * mailling list and I try a lot of things without success. Any help will be appreciated. Here is the info: Hardware: -------------------------------------------- Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 Digium TE110P Software --------------------------------------------- Asterisk version 1.2.12.1