Hello, I'm having problem with a wildcard TE110P. As soon as I load the module (wcte11xp for kernel 2.6.10), it spawns a yellow error with or without an E1 plugged-in. Any one managed to set it up in France? Here are my files: zaptel.conf: span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 zapata.conf: [channels] language=fr context=default switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown signalling=pri_cpe echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no group=1 channel => 1-15 channel => 17-31 I also tried without crc4 and using signaling=pri_net. Thanks for any idea.
Sounds like you don't ever get Layer 1 up. I'd check your cabling (pins 1,2 and 4,5) Should span=1,1,0,ccs,hdb3,crc4 be the way to go (aren't you getting clocking from your carrier...) Good luck. Cheers, Peter -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Andre FAURE Sent: Tuesday, 18 January 2005 11:59 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE110P as E1 Hello, I'm having problem with a wildcard TE110P. As soon as I load the module (wcte11xp for kernel 2.6.10), it spawns a yellow error with or without an E1 plugged-in. Any one managed to set it up in France? Here are my files: zaptel.conf: span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 zapata.conf: [channels] language=fr context=default switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown signalling=pri_cpe echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no group=1 channel => 1-15 channel => 17-31 I also tried without crc4 and using signaling=pri_net. Thanks for any idea. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Hi, Is it the same as IP500? Does it run the same software or do I need to flash it? Is so whare do I get it? Thanks a lot. robert
Yes, the Shoreline IP100 is just a rebranded Polycom Soundpoint IP500, and uses the same software. By default it uses a MGCP image, but it can be changed to run SIP. See http://www.voip-info.org/tiki-index.php?page=Polycom%20Phones for more info. B. J. -----Original Message----- From: Robert Augustyn [mailto:augustynr@yahoo.com] Sent: Wednesday, January 19, 2005 23:56 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] SHORELINE IP100 Hi, Is it the same as IP500? Does it run the same software or do I need to flash it? Is so whare do I get it? Thanks a lot. robert
I believe that there is a Sip software version 1.3.4 available for that phone. The freedomphone.com has only 1.3.1. Any idea where to get the latest? Thanks a lot for your help. robert --- "B. J. Bomar" <bbomar@raccoon.com> wrote:> Yes, the Shoreline IP100 is just a rebranded Polycom > Soundpoint IP500, and > uses the same software. By default it uses a MGCP > image, but it can be > changed to run SIP. See >http://www.voip-info.org/tiki-index.php?page=Polycom%20Phones> for more info. > > B. J. > > > > > > -----Original Message----- > From: Robert Augustyn [mailto:augustynr@yahoo.com] > Sent: Wednesday, January 19, 2005 23:56 > To: Asterisk Users Mailing List - Non-Commercial > Discussion > Subject: [Asterisk-Users] SHORELINE IP100 > > Hi, > Is it the same as IP500? > Does it run the same software or do I need to flash > it? > Is so whare do I get it? > Thanks a lot. > robert > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users>