Displaying 20 results from an estimated 500 matches similar to: "Problems compiling CAPI"
2007 Mar 22
1
Problem in using Two BRi Cards in Asterisk
Hi,
I have done my best and tired of searching the net about the problem. If anybody could help
would be a great favour.
Description of Problem
------------------------
I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim
is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture
manual. After installation dmesg
2007 Mar 07
1
capi installation problem
Hello,
I have problem with capi, I can't install it. I have putted all info what I
did and what I get :). I think you can suggest me how to solve this
problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI
v2.1and I want to install it to my ubuntu box (kernel:
2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds
this card:
*02:0d.0 Network
2005 Feb 28
1
Suse 9.2 + CAPI Driver
Hello,
I'm trying to install CAPI Driver for Suse 9.2 and I found the documentation for this pretty old since It refers to Suse 8.2 ( http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install ). This is especially apparent when I look at the section of these instructions for altering "src.drv/makefile" to replace the occurance of "CARD_PATH".
I tried to
2003 Sep 22
0
3 fritz-cards pci
hello,
got anybody succesfully setup asterisk with three avm fritz pci cards -
using the howto described in
http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO
i already have asterisk working with 2 cards, by when i add third card
and compile driver ( see capiinit debug below ) asterisk freeze on capi
initialization....
does anybody know how to solve this ?
regards Marian
------------------
2004 Jun 07
1
AVM B1 and PTP mode
Hi !
I've fetched a spare AVM B1 card from the cellar, and installed it. After
"modprobe b1pci" I did "capiinit" and capiinit moaned about a missing
t1.b4.
So I search the web and found one at
http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the
controller, I finally see p2p-mode:
# cat /proc/capi/controllers/1
name b1pciv4-a400
io
2004 Dec 17
1
chan_capi - avm card does not work
Hi,
I added a Fritz!PCI card to my asterisk system which is running on fc2
!.
I installed the avm modules (fcpci) and when i try an capiinit and a
capiinfo then everything seems to be OK (you can see capiinfo and lsmod
at the end of the text) !.
I installed the asterisk chan_capi module and when i start asterisk and
enter the command capi info on the command line i get back:
*CLI> capi info
2003 May 14
2
AVM Fritz/Capi without suse ?
Hi All,
Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards
suse, and after trying them with RedHat 9 I've not got very far. The
module compiles but dies when I attempt to modprobe it.
I've googled until I almost lost the will to live! What little
information
I can find seems to refer back to
2006 Jun 02
2
BN8S0 Installation problem - 0 devices registrered
hi
i am experiencing some problems with the configuration of an BN8S0 Beronet card.
I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel
2.6.16.18 and the enabled the following:
<*> ISDN support
x x Old ISDN4Linux --->
x x --- CAPI subsystem
x x <M> CAPI2.0 support
x x [*] Verbose reason code reporting (kernel size +=7K)
x x [*]
2004 May 28
3
2 Avm fritz passive card in the same box
Hi, I successfully installed 2 avm card in my asterisk box but I'm unable
to make call. My capi.conf is:
msn=0721111,07211115
incomingmsn=*
controller=1,2
softdtmf=1
context=default
echocancel=yes
callgroup=1
devices=2,2
my capi info :
Contr1: 2 B channels total, 2 B channels free.
Contr2: 2 B channels total, 2 B channels free.
my extensions.conf :
exten =>
2004 Jun 22
0
Accessing ISDN with avm bluetooth hardware
Hi *,
This is my first message to this list, so I hope I am not breaking any rule with my post.
My question is the following: can I establish a voice connection over an ISDN interface by using a
bluetooth dongle to connect to the ISDN access point?
Here follow the details:
I have compiled and configured asterisk. Everything seems fine except that when I configure
asterisk to use the ISDN
2004 Sep 14
1
ERROR: cannot load module kernelcapi
Hello List!
I have this "simple" problem:
fileserver:/usr/src# capiinit start
modprobe: Can't locate module kernelcapi
ERROR: cannot load module kernelcapi
Although, i think i hav everything build in, and loaded:
~# grep -i capi linux-2.4.27/.config
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
2005 Feb 20
1
Mandrake & CAPI
All,
I have been trying to get CAPI4Linux working on my machine and being
frank am failing miserably! I am looking for any help available, I am
real newbie (so please be gentle) and choose to run Mandrake 9.2 as it
appears quite friendly (or so I thought!).
I have been following the guidance found at
http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the
AVM card (actually I
2003 Oct 03
1
TE410P: Double/missed interrupt detected
Any ideas on the following? (CVS 10/01/2003)
Only reference I could find was a Zaptel change log update...
2003-09-02 18:23 martinp
* wct4xxp.c (1.6): Get rid of the Double missed interrupt message
every time you load the driver
and an email refering this to serial console usage.
Something I should worry about?
Oct 3 22:48:01 cti-350 kernel: TE410P: Double/missed interrupt detected
Oct 3
2001 Aug 31
1
wine and fritz! (capi2.0)
Hi,
has andybody a running capi2.0 application like fritz
with wine?
I tried to use the capri-client for windoze, but I have
no idea how to load ghost.exe before starting fritz.
Thanks,
Eckhard
2003 Apr 25
0
Diva 4BRI, asterisk and capidrv support ?
Hello,
I acquired a Diva Server 4BRI for an AsteriskPBX system and installed a
2.4.20 kernel modified with the latest eicon capi2.0 support from
www.melware.net.
Capi support seems to work fine: Asterisk+chan_capi answers the calls.
However if I try to use my old isdnutils apps by loading a i4l
compatibility layer then I have the following problems:
- if I use the diva2i4l module and start the
2004 Nov 20
2
zaphfc sound problems
hi list.
after my unsuccessfull experiences with mISDN i tried again to implement
a zaphfc based solution.
problem is: sound on calls via capi is stuttering/broken and therefore
unuseable.
my conf:
- cel 1300, 256mb ram
- avm b1 via capi connected to my outgoing ISDN
- acer surf pci via zaphafc and crosslink cable with termination as
internal bus
- siemens gigaset 3035 as internal phone
-
2004 Jun 28
4
Chan_Capi Down
Hi all,
* was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a
Today chan_capi stopped working, without any changings at the system.
It seems, that not * is the reason, because isdn-log also shows no calls.
If I try to call * from outside via capi, I only get a busy.
That is the try from inside to outside:
stern01*CLI>
-- data = @89930:0107901723168212
-- capi
2005 Jan 04
3
AVM C2 capi.conf ?
Hi,
i will use an AVM C2 controller with asterisk.
How can i use both card ports ?? On the voip-info.org Wiki is only notice
to:
You will need a section for each controller in /etc/asterisk/capi.conf so
the C2 will have 2 sections.
But how is look like this ?
Only on the first port is asterisk assume connections, but nothing on the
second card port. In the dmesg is only the capidrv-1 shown,
2005 Jun 20
0
second isdn line doesn't work with avm c2 card
I have an asterisk installation connected to 2 isdn lines via an AVM C2
card.
modules seems to load well, lsmod gives :
c4 19588 4
b1 24192 1 c4
capidrv 28468 2
isdn 134604 9 capidrv
slhc 7552 1 isdn
capi 18112 4
capifs 6024 2 capi
kernelcapi 46112 4
2007 Jul 24
0
mISDN & Asterisk 1.4: HFC-S card not responsive
Hi,
I have installed Asterisk 1.4 with mISDN with the
install-asterisk.tar.gz script from beronet.com. On my system I have two
cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to
work well with mISDN on my system from a previous installation.
Now however, the AVM card works well at first glance, i.e. it
"registers" incoming calls and works through the asterisk