Hi all,
* was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a
Today chan_capi stopped working, without any changings at the system.
It seems, that not * is the reason, because isdn-log also shows no calls.
If I try to call * from outside via capi, I only get a busy.
That is the try from inside to outside:
stern01*CLI>
-- data = @89930:0107901723168212
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/2 == CAPI Call CAPI[contr1/89930]/2
-- CONNECT_CONF ID=003 #0x000d LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_IND ID=003 #0x0002 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, 01723168212, 2) exited non-zero on
'SIP/ePfd-7515'
-- data = @89930:01079h
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/3 == CAPI Call CAPI[contr1/89930]/3
-- CONNECT_CONF ID=003 #0x000e LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_CONF ID=003 #0x000f LEN=0014
Controller/PLCI/NCCI = 0xffffffff
Info = 0x2002
-- DISCONNECT_IND ID=003 #0x0003 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, h, 1) exited non-zero on
'SIP/ePfd-7515'
dmesg shows:
isdn_dc2minor: di(0) ch(-1072539760) invalid
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled
capi: controller 1 up
kcapi: notify up contr 2
capidrv: controller 2 up
isdn_dc2minor: di(1) ch(-1072539760) invalid
capidrv-2: now up (2 B channels)
capidrv-2: D2 trace enabled
capi: controller 2 up
kcapi: notify up contr 3
capidrv: controller 3 up
isdn_dc2minor: di(2) ch(-1072539760) invalid
capidrv-3: now up (2 B channels)
capidrv-3: D2 trace enabled
capi: controller 3 up
kcapi: notify up contr 4
capidrv: controller 4 up
isdn_dc2minor: di(3) ch(-1072539760) invalid
capidrv-4: now up (2 B channels)
capidrv-4: D2 trace enabled
capi: controller 4 up
I hope, that you could help me...
Thanks
Felix Deierlein
I am also having the same problem. Latest CVS & Latest Capi
When it does work and you pick up the phone, CAPI disconnects the call.
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of ePyron Felix
Deierlein
Sent: 28 June 2004 18:34
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Chan_Capi Down
Hi all,
* was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a
Today chan_capi stopped working, without any changings at the system.
It seems, that not * is the reason, because isdn-log also shows no
calls.
If I try to call * from outside via capi, I only get a busy.
That is the try from inside to outside:
stern01*CLI>
-- data = @89930:0107901723168212
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/2 == CAPI Call CAPI[contr1/89930]/2
-- CONNECT_CONF ID=003 #0x000d LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_IND ID=003 #0x0002 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, 01723168212, 2) exited non-zero on
'SIP/ePfd-7515'
-- data = @89930:01079h
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/3 == CAPI Call CAPI[contr1/89930]/3
-- CONNECT_CONF ID=003 #0x000e LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_CONF ID=003 #0x000f LEN=0014
Controller/PLCI/NCCI = 0xffffffff
Info = 0x2002
-- DISCONNECT_IND ID=003 #0x0003 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, h, 1) exited non-zero on
'SIP/ePfd-7515'
dmesg shows:
isdn_dc2minor: di(0) ch(-1072539760) invalid
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled
capi: controller 1 up
kcapi: notify up contr 2
capidrv: controller 2 up
isdn_dc2minor: di(1) ch(-1072539760) invalid
capidrv-2: now up (2 B channels)
capidrv-2: D2 trace enabled
capi: controller 2 up
kcapi: notify up contr 3
capidrv: controller 3 up
isdn_dc2minor: di(2) ch(-1072539760) invalid
capidrv-3: now up (2 B channels)
capidrv-3: D2 trace enabled
capi: controller 3 up
kcapi: notify up contr 4
capidrv: controller 4 up
isdn_dc2minor: di(3) ch(-1072539760) invalid
capidrv-4: now up (2 B channels)
capidrv-4: D2 trace enabled
capi: controller 4 up
I hope, that you could help me...
Thanks
Felix Deierlein
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Same here :-(
asterisk show's this error in the same moment i'm trying to pick up an
incoming call:
Jun 23 13:14:03 ERROR[-1284076624]: chan_capi.c:881 capi_write: dont know
how to write subclass 64
This problem starts with cvs update -D "6/21/04 21:00:00 CET"
If i revert back to cvs update -D "6/21/04 18:00:00 CET" the problem
is
gone.
-- original message --
I am also having the same problem. Latest CVS & Latest Capi
When it does work and you pick up the phone, CAPI disconnects the call.
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of ePyron Felix
Deierlein
Sent: 28 June 2004 18:34
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Chan_Capi Down
Hi all,
* was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a
Today chan_capi stopped working, without any changings at the system.
It seems, that not * is the reason, because isdn-log also shows no
calls.
If I try to call * from outside via capi, I only get a busy.
That is the try from inside to outside:
stern01*CLI>
-- data = @89930:0107901723168212
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/2 == CAPI Call CAPI[contr1/89930]/2
-- CONNECT_CONF ID=003 #0x000d LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_IND ID=003 #0x0002 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, 01723168212, 2) exited non-zero on
'SIP/ePfd-7515'
-- data = @89930:01079h
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/3 == CAPI Call CAPI[contr1/89930]/3
-- CONNECT_CONF ID=003 #0x000e LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_CONF ID=003 #0x000f LEN=0014
Controller/PLCI/NCCI = 0xffffffff
Info = 0x2002
-- DISCONNECT_IND ID=003 #0x0003 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, h, 1) exited non-zero on
'SIP/ePfd-7515'
dmesg shows:
isdn_dc2minor: di(0) ch(-1072539760) invalid
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled
capi: controller 1 up
kcapi: notify up contr 2
capidrv: controller 2 up
isdn_dc2minor: di(1) ch(-1072539760) invalid
capidrv-2: now up (2 B channels)
capidrv-2: D2 trace enabled
capi: controller 2 up
kcapi: notify up contr 3
capidrv: controller 3 up
isdn_dc2minor: di(2) ch(-1072539760) invalid
capidrv-3: now up (2 B channels)
capidrv-3: D2 trace enabled
capi: controller 3 up
kcapi: notify up contr 4
capidrv: controller 4 up
isdn_dc2minor: di(3) ch(-1072539760) invalid
capidrv-4: now up (2 B channels)
capidrv-4: D2 trace enabled
capi: controller 4 up
I hope, that you could help me...
Thanks
Felix Deierlein
_________________________________________________________________
Listen to music online with the Xtra Broadband Channel
http://xtra.co.nz/broadband
Thanks I will give that a try.
Looks like this may need a bug report? We are all getting the same
errors.
Outgoing is fine for me.
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Andreas
Anderson
Sent: 28 June 2004 23:26
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] RE: Chan_Capi Down
Same here :-(
asterisk show's this error in the same moment i'm trying to pick up an
incoming call:
Jun 23 13:14:03 ERROR[-1284076624]: chan_capi.c:881 capi_write: dont
know
how to write subclass 64
This problem starts with cvs update -D "6/21/04 21:00:00 CET"
If i revert back to cvs update -D "6/21/04 18:00:00 CET" the problem
is
gone.
-- original message --
I am also having the same problem. Latest CVS & Latest Capi
When it does work and you pick up the phone, CAPI disconnects the call.
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of ePyron Felix
Deierlein
Sent: 28 June 2004 18:34
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Chan_Capi Down
Hi all,
* was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a
Today chan_capi stopped working, without any changings at the system.
It seems, that not * is the reason, because isdn-log also shows no
calls.
If I try to call * from outside via capi, I only get a busy.
That is the try from inside to outside:
stern01*CLI>
-- data = @89930:0107901723168212
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/2 == CAPI Call CAPI[contr1/89930]/2
-- CONNECT_CONF ID=003 #0x000d LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_IND ID=003 #0x0002 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, 01723168212, 2) exited non-zero on
'SIP/ePfd-7515'
-- data = @89930:01079h
-- capi request omsn = @89930
== found capi with omsn = 89930
== CAPI Call CAPI[contr1/89930]/3 == CAPI Call CAPI[contr1/89930]/3
-- CONNECT_CONF ID=003 #0x000e LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_CONF ID=003 #0x000f LEN=0014
Controller/PLCI/NCCI = 0xffffffff
Info = 0x2002
-- DISCONNECT_IND ID=003 #0x0003 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
== Spawn extension (OutDial-Dial, h, 1) exited non-zero on
'SIP/ePfd-7515'
dmesg shows:
isdn_dc2minor: di(0) ch(-1072539760) invalid
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled
capi: controller 1 up
kcapi: notify up contr 2
capidrv: controller 2 up
isdn_dc2minor: di(1) ch(-1072539760) invalid
capidrv-2: now up (2 B channels)
capidrv-2: D2 trace enabled
capi: controller 2 up
kcapi: notify up contr 3
capidrv: controller 3 up
isdn_dc2minor: di(2) ch(-1072539760) invalid
capidrv-3: now up (2 B channels)
capidrv-3: D2 trace enabled
capi: controller 3 up
kcapi: notify up contr 4
capidrv: controller 4 up
isdn_dc2minor: di(3) ch(-1072539760) invalid
capidrv-4: now up (2 B channels)
capidrv-4: D2 trace enabled
capi: controller 4 up
I hope, that you could help me...
Thanks
Felix Deierlein
_________________________________________________________________
Listen to music online with the Xtra Broadband Channel
http://xtra.co.nz/broadband
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Hiya,>Looks like this may need a bug report? We are all getting the same >errors.Sure, but i guess a bug to bugs.digium.com will be rejected, chan_capi is not in CVS. Maybe kpj@junghanns.net could do a fix, :-D PLEEEEEEASE :-D? BTW: kapejod, any chances to disclaim chan_capi to digium? It would safe some troubles if it was in CVS...>Outgoing is fine for me.yes, no problem with outgoing. bye. aa _________________________________________________________________ Need more speed? Get Xtra JetStream @ http://xtra.co.nz/jetstream