asterisk users - May 2003 - AVM Fritz/Capi without suse ?

Hi All,

Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards 
suse, and after trying them with RedHat 9 I've not got very far. The 
module compiles but dies when I attempt to modprobe it.

I've googled until I almost lost the will to live! What little
information
I can find seems to refer back to RH6 / RH7 and is almost exclusively in
German. As my German is very poor it does make things a little
difficult!

Thanks,
Nathan.

I have compiled suse driver for AVM FRITZ ISDN V2 and it works fine,
with a very low echo but fine.

With a Kernel 2.4.17 I have configured ACTIVE CARD in the next way:

< > ICN 2B and 4B support
< > PCBIT-D support               
< > Spellcaster support      
< > IBM Active 2000 support                   
[ ] Eicon active card support                                      
< > Auvertech TurboPAM support

<M> CAPI2.0 support

[*]   Verbose reason code reporting (kernel size +=7K)

[*]   CAPI2.0 Middleware support (EXPERIMENTAL)

<M>   CAPI2.0 /dev/capi support

[*]     CAPI2.0 filesystem support

<M>   CAPI2.0 capidrv interface support

< >   AVM B1 ISA support

< >   AVM B1 PCI support

< >   AVM T1/T1-B ISA support

< >   AVM B1/M1/M2 PCMCIA support

< >   AVM T1/T1-B PCI support

< >   AVM C4/C2 support                                   

One you have compiled kernel, you try to compile suse driver.


Regards,
srsergio




-----Mensaje original-----
De: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] En nombre de nathan
Enviado el: mi?rcoles, 14 de mayo de 2003 17:02
Para: asterisk-users@lists.digium.com
Asunto: [Asterisk-Users] AVM Fritz/Capi without suse ?


Hi All,

Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards 
suse, and after trying them with RedHat 9 I've not got very far. The 
module compiles but dies when I attempt to modprobe it.

I've googled until I almost lost the will to live! What little
information I can find seems to refer back to RH6 / RH7 and is almost
exclusively in German. As my German is very poor it does make things a
little difficult!

Thanks,
Nathan.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users

On Wed, 14 May 2003 at 16:02, nathan wrote:
> Has anyone had success with using the AVM Fritz PCI ISDN Card (v2)
> CAPI drivers with a distro other than suse? The AVM driver is geared
> towards suse, and after trying them with RedHat 9 I've not got very
> far. The module compiles but dies when I attempt to modprobe it.
What do you mean by "it dies"?
Does it refuse to load?
Does the whole system freeze?
Or does it do something completely different?

cu
	Reinhard