Displaying 20 results from an estimated 8000 matches similar to: "Polycom SoundPoint IP 300 Configuration"
2005 Aug 04
1
PolyCom SoundPoint 300 and distinctive ring
I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint
300. Does ALERT_INFO apply? If so, how?
Thanks,
David Koski
david.nospham@kosmosisland.com
2005 Jan 14
1
Polycom SoundPoint IP by Shoreline
I've got a couple Shoreline IP phones, their Shoreline model number is
Shoreline IP 100. I believe this is actually a Polycom SoundPoint IP 300
phone. I believe the phone is using a MGCP stack.
I want to use it for testing with Asterisk.
1. I suspect I need to re-image the phone to make it work with *.
2. How can I preserve the current image on the phone?
3. What is preferred image to use
2004 Aug 16
4
Polycom SoundPoint IP 500/600 XML minibrowser
Has anyone been able to get the minibrowser on the Polycom SoundPoint IP
500/600 phones working? If so could you share the relevant sections of
your config with me?
2004 Aug 30
1
Polycom SoundPoint... Gains - Which is for speakerphone
now that I have finally figured out what I was doing wrong with my
polycom phone and got it to read the configuration file Im changing some
gains.
I successfully changed the gain for the ringer... It was too low for me.
Does anyone know which gain would be for the call waiting and which tone
would be for the "hands free" mode?
Thanks
2003 Oct 29
2
Polycom SoundPoint IP 500
Hello all,
Has anyone used the SIP version of this phone with Asterisk?
I see Polycom has a H.323 and MGCP version also, does anyone know if
you flash the phone to swith protocols?
Thanks in advance for the info.
Ed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm
2006 May 25
2
Volume configuration on Polycom Soundpoint 501phone
Could not find your post for 4 months ago.
-------------- Original message --------------
From: "Anton Krall" <akrall-lists@intruder.com.mx>
> Yes, check a post that I made about 4 months ago, I posted the cofig for
> setting the speaker, handset and ring volumes ..
>
> |-----Original Message-----
> |From: asterisk-users-bounces@lists.digium.com
>
2005 Feb 09
5
polycom soundpoint ip 300
hello,
I try to set up two lines per ip 300 phone,
registration is ok but i get Failure to authenticate
407 for subscribe.
Anybody could help me to configure Asterisk in order
to set instant message and presence ?
I've tried with Ondo sip server it's ok !
Regards
D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
Cr?ez votre Yahoo! Mail
2004 Sep 02
5
Polycom SIP INFO & Changing Ringers
In ipmid.cfg I have:
<G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer"
se.rt.4.timeout="1000" se.rt.10.ringer="7"/>
In sip.cfg I have:
<alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM"
voIpProt.SIP.alertInfo.1.class="10"/>
I set up a test extension:
exten =>
2005 Jul 09
3
polycom soundpoint 300 sip phone and hold music
I have an extension setup in my extensions.conf for hold music. ext. 600.
If I pick up a phone (polycom soundpoint 300 sip) and dial extension 600
I hear the hold music playing. If I call another extension and pick it
up and put the call on hold with the hold button on the phone I hear
nothing at all. Does anyone have any experience with these phones and
getting the hold button to work?
2003 Dec 30
3
SIP phone as intercom
(new asterisk user - currently setting up Polycom IP600 phones)
Does anyone know if it's possible to make a sip phone instantly pick up
on speakerphone when a particular call comes in? Eg so that you can
quickly bother someone across the office without making them reach for
their phone?
2003 Oct 17
2
Polycom IP 600 phone
Hello,
I have finally received the details from Polycom to get into the backend
configuration of their SoundPoint IP 600 SIP VOIP phone. The phone is quite
nice looking but the configs are very sparse, not even a place for a
secret(password) field in their SIP registration section.
If anyone else has one of these and needs the passwords to get into the back
end configurations, just send me an
2003 Dec 26
2
Polycom Sip Registration
Hello,
Has anyone on the list been able to successfully setup a Polycom
Soundpoint 500 IP phone? I am getting failed registrations, and the
Polycom documentation is not very precise. Their web interface isn't
helping much either.
Thanks in advance,
Brent
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2003 Dec 15
4
IP 500/600 1.1.0 Firmware
Has anyone on the list been able to locate and try out the 1.1.0 firmware? It was released in November, but I have yet to get my hands on it. The Polycom site has way more docs online, but the link to the firmware only brings up the release notes.
-sb
2007 Aug 09
2
How to disable DND feature key in Polycom Phone
Hi
We have polycom 430,501 and 301 phones. Our customer does not need DND feature in any form.
I can disable this feature from asterisk server but How can i disable this feature on phones. In the
sip configuration file i found the parameter that change the phone behaviour during DND from busy
to normal but still if the phone is in dnd mode the phone ringer would be off which is unacceptable.
2005 Jan 18
4
TE110P as E1
Hello,
I'm having problem with a wildcard TE110P. As soon as I load
the module (wcte11xp for kernel 2.6.10), it spawns a yellow
error with or without an E1 plugged-in.
Any one managed to set it up in France?
Here are my files:
zaptel.conf:
span=1,0,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
zapata.conf:
[channels]
language=fr
context=default
switchtype=euroisdn
pridialplan=unknown
2005 Mar 18
1
XML config files for Polycom SoundPoint IP 300?
I bought a couple Polycom Soundpoint 300's, and have them working nicely
with SIP... but I'd like to be able to do automatic config via FTP, but it
requires some XML config files. The docs discuss them in detail, but I
can't seem to d/l them from Polycom. [No, it doesn't appear to be on the
CD that comes with the phone.] I've created an account at Polycom's tech
support
2004 Oct 18
20
Polycom phones
I have a couple of Polycom phones, bootrom 2.5.0, SIP 1.3.1.0056. Works
great with Asterisk when I power on the phone. However, after some time,
say an hour, I cannot receive calls on this phone. On Asterisk, when I
do "database show", it does show the phone in there, but it cannot reach
the phone. Is there a way to keep alive the connection with Polycom?
Any suggestions?
Thanks,
--
2007 Mar 28
2
Polycom SoundPoint 501
Hi
We've setup an Asterisk PBX recently and I encountered the following
problem: When [mac address]-registration.cfg file includes the FQDN of
the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even
try to) register with the Asterisk PBX unless the DNS (it asks)
successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this
happen to anyone else?
PS - The
2005 Jan 16
2
Looking for help with a Polycom Soundpoint IP 600
Hi all,
I have a Polycom Soundpoint IP 600 that looks like it is fried. It either
has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt
that asks if I want to enter the setup configuration or continue booting.
When plugged into power, it turns on, shows the Polycom logo for 3 seconds
and then pretty much goes dead with two red lights on. The one in the top
right corner
2004 Jun 14
4
Polycom IP 600
I am getting ready to install Asterisk and I was looking into the Polycom
IP600 phones. I spoke with Polycom sales to verify the multiple line
appearance and they said it would work. More specifically, if lines 1-3 all
contain the same SIP registration info, the Polycom will only send out 1 SIP
registration to the server and then handle the calls ringing on multiple
lines.
I was wondering if