Hello ml, i need some help on my zaptel configuration. My E100P only shows some YELLOW / RED alarm when I load the wct1xxp module and do a cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED ... .. . My /etc/zaptel.conf is: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nl defaultzone=nl I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a configuration problem. Can anyone give me a hint how to configure my E100P? Thank you for your help, Jan Goericke
On Fri, 2004-09-03 at 05:31, Jan Goericke wrote:> Hello ml, > > i need some help on my zaptel configuration. My E100P only shows some > YELLOW / RED alarm when I load the wct1xxp module and do a > > cat /proc/zaptel/1 > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED > ... > .. > . > > > My /etc/zaptel.conf is: > > span=1,1,0,ccs,hdb3 > bchan=1-15,17-31 > dchan=16 > loadzone=nl > defaultzone=nl > > I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a > configuration problem. Can anyone give me a hint how to configure my > E100P?Next step is to start asterisk so libpri attaches to your line and brings up the D channel. -- Steven Critchfield <critch@basesys.com>
did you tried it with crc4 as well ? span=1,1,0,ccs,hdb3,crc4 ? On Fri, 2004-09-03 at 13:00, Steven Critchfield wrote:> On Fri, 2004-09-03 at 05:31, Jan Goericke wrote: > > Hello ml, > > > > i need some help on my zaptel configuration. My E100P only shows some > > YELLOW / RED alarm when I load the wct1xxp module and do a > > > > cat /proc/zaptel/1 > > > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED > > ... > > .. > > . > > > > > > My /etc/zaptel.conf is: > > > > span=1,1,0,ccs,hdb3 > > bchan=1-15,17-31 > > dchan=16 > > loadzone=nl > > defaultzone=nl > > > > I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a > > configuration problem. Can anyone give me a hint how to configure my > > E100P? > > Next step is to start asterisk so libpri attaches to your line and > brings up the D channel.
Thanks for the hint. I did it and zap show channels shows me the 31 channel. But when I check /proc/zaptel/1, i still get the same error as before. On Fri, 3 Sep 2004, Steven Critchfield wrote:> On Fri, 2004-09-03 at 05:31, Jan Goericke wrote: > > Hello ml, > > > > i need some help on my zaptel configuration. My E100P only shows some > > YELLOW / RED alarm when I load the wct1xxp module and do a > > > > cat /proc/zaptel/1 > > > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED > > ... > > .. > > . > > > > > > My /etc/zaptel.conf is: > > > > span=1,1,0,ccs,hdb3 > > bchan=1-15,17-31 > > dchan=16 > > loadzone=nl > > defaultzone=nl > > > > I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a > > configuration problem. Can anyone give me a hint how to configure my > > E100P? > > Next step is to start asterisk so libpri attaches to your line and > brings up the D channel. > -- > Steven Critchfield <critch@basesys.com> > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Yes I tried this too. But the problem is the same. On Fri, 3 Sep 2004, Michael Bielicki wrote:> did you tried it with crc4 as well ? > span=1,1,0,ccs,hdb3,crc4 ? > > On Fri, 2004-09-03 at 13:00, Steven Critchfield wrote: > > On Fri, 2004-09-03 at 05:31, Jan Goericke wrote: > > > Hello ml, > > > > > > i need some help on my zaptel configuration. My E100P only shows some > > > YELLOW / RED alarm when I load the wct1xxp module and do a > > > > > > cat /proc/zaptel/1 > > > > > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED > > > ... > > > .. > > > . > > > > > > > > > My /etc/zaptel.conf is: > > > > > > span=1,1,0,ccs,hdb3 > > > bchan=1-15,17-31 > > > dchan=16 > > > loadzone=nl > > > defaultzone=nl > > > > > > I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a > > > configuration problem. Can anyone give me a hint how to configure my > > > E100P? > > > > Next step is to start asterisk so libpri attaches to your line and > > brings up the D channel. > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
What alarm is it. Is it red or is it yellow. If it's red then it's the /etc/zaptel config But if it's yellow then it's a problem with sync the channels Which could be a master - slave problem. Very easy to fix. Sean -----Original Message----- From: Jan Goericke [mailto:asterisk@kugelbauchadmin.de] Sent: 03 September 2004 12:42 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Digium E100P and PMX in Germany Thanks for the hint. I did it and zap show channels shows me the 31 channel. But when I check /proc/zaptel/1, i still get the same error as before. On Fri, 3 Sep 2004, Steven Critchfield wrote:> On Fri, 2004-09-03 at 05:31, Jan Goericke wrote: > > Hello ml, > > > > i need some help on my zaptel configuration. My E100P only shows some > > YELLOW / RED alarm when I load the wct1xxp module and do a > > > > cat /proc/zaptel/1 > > > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED > > ... > > .. > > . > > > > > > My /etc/zaptel.conf is: > > > > span=1,1,0,ccs,hdb3 > > bchan=1-15,17-31 > > dchan=16 > > loadzone=nl > > defaultzone=nl > > > > I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a> > configuration problem. Can anyone give me a hint how to configure my > > E100P? > > Next step is to start asterisk so libpri attaches to your line and > brings up the D channel. > -- > Steven Critchfield <critch@basesys.com> > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users