asterisk users - Dec 2003 - ISDN-PRI - WCT1XXP error

Hi,

I am trying to set up * and ISDN-PRI (channels 1 - 15) using E100 
boards. I installed zaptel and  libpri. When I execute modprobe -r 
wct1xxp I get an error message:

ZT_CHANCONFIG failed on channel 1: Function not implemented (38)
/lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed
/lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed

Follows my /etc/zaptel.conf:

span=1,0,0,ccs,hdb3
nethdlc=1-15
loadzone = us

Thanks in advance,

Daniel

On Monday 22 of December 2003 17:54, Daniel Bichara
wrote:
> ZT_CHANCONFIG failed on channel 1: Function not implemented (38)
> /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed
> /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed
your zaptel.conf is wrong
it has to be:
Follows my /etc/zaptel.conf:

span=1,0,0,ccs,hdb3
====> wrong nethdlc=1-15
bchan=1-15
dchan=16
loadzone = us

Thanks in advance,

-- 
Michael Bielicki
Managing Director
TAAN Consultants Ltd
http://www.global-gateway.net/

--------------------------------------------------------------------------

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.