Displaying 20 results from an estimated 880 matches for "usecallerid".
2007 Jul 19
4
Why using usecallerid=no?
Hi everybody.
I'm in a discussion and someone ask me in which situation we should use the
zapata.conf usecallerid set to no. I didn't have the answer.
I understand what the usecallerid keyword does but I'm talking about a
actual situation that is interesting to to avoid receiving the caller id.
Thanks in advance!
--
--------------------------------------------
Paulo Garcia
Pika Technologies
-------...
2004 Jan 25
2
Example of TDM20B
...on Card in my
Asterisk.
I have (1) XP100P
I have (1) tdm20B (2 Port FXS)
Could someone tell me if this is correct?
/etc/zaptel.conf
fxsks=1
fxoks=2
fxoks=3
loadzone=us
defaultzone=us
/etc/asterisk/zapata.conf
[channels]
;
language=en
;
;X100P Port 1
context=inbound-analog
signalling=fxs_ks
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
channel => 1
;
; FXS Port 1
context=local
signalling=fxs_ls
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
;
;FXS Port 2
context=local
signalling=fxs_ls
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
/etc/asterisk/extensions.conf...
2006 Apr 27
1
Excessive Asterisk delay to answer on ZAP inboundcall
...S but not used during tests):
>
> ;-------------------------------------------------
> ; Channel: zap/2 [in] - Telecom (lasciare libera)
> ;-------------------------------------------------
> language = us
> musiconhold = default
> signalling = fxs_ks
> channel => 2
> usecallerid=no
>
> Note that omitting usecallerid=no does not change the result.
>
> Thanks to all for advices.
>
>
> Giorgio Incantalupo
>
>
>
>
> Eric "ManxPower" Wieling wrote:
> > Paste your zapata.conf.
> >
> > Giorgio Incantalupo wr...
2005 Aug 27
1
Asterisk ISDN: Problem Setting CallerID as DID Extension Numbers.
...ent:
- To be able send Indial numbers as Caller ID when dialing out.
Configration:
capi.conf
---------
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
mode=immediate
isdnmode=ptp
msn=BAAAAAA
incomingmsn=*
controller=1
softdtmf=1
accountcode=
context=main-menu
usecallerid=yes
callerid=asreceived
;echosquelch=1
;echocancel=yes
;echotail=64
callgroup=1
pickupgroup=1
devices=2
mode=immediate
isdnmode=ptp
msn=BAAAAAA
incomingmsn=*
controller=2
softdtmf=1
accountcode=
context=main-menu
usecallerid=yes
callerid=asreceived
callgroup=1
pickupgroup=1
devices=2
mode=immedia...
2004 Sep 18
3
uk caller id
dear all, i am looking to enable CALLERID on an Asterisk system comprising a
X101P FXO interface connecting to BT PSTN in the uk
seems this is supported by the interface but there seems to be varying
information on how to enable it in zapata.conf
1. usecallerid=uk
2. ukcallerid=yes
being two of the configuration statements offered
TIA
GT
2005 Aug 16
1
adding another fxo card
...trying to add 2 more cards so my question is - do I just
increase the channel count on the zaptel.conf and zapata.conf files?
[original]
/etc/zaptel.conf
fxsks=1
loadzone = us
defaultzone=us
/etc/asterisk/zapata.conf
[channels]
language=en
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=yes
echotraining=800
group=0
channel=1
[new]
/etc/zaptel.conf
fxsks=1-3
loadzone = us
defaultzone=us
/etc/asterisk/zapata.conf
[channels]
language=en
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes...
2005 Feb 11
2
Question about DID
...done with HylaFax.
Any help would be great!!
Here is my configs
cat zaptel.conf
#PRI to Telco
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
# PRI to Fax server
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
zapata.conf
[channels]
context=from-analog
signalling=pri_cpe
switchtype=dms100
group=1
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=no
useincomingcalleridonzaptransfer=yes
callerid=asreceived
faxdetect=no
musiconhold=default
channel => 1-23
context=from-sip-internal
switchtype=dms100
signalling=pri_net
group=2
overlapdial=yes
usecallerid=yes
hidecallerid=no
restrictcid=no
u...
2004 Aug 12
5
Question about TE405P
...,hdb3
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
zapata.conf
[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
language=en
immediate=no
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!...
2004 Sep 28
7
UK (British Telecom) Caller ID again
...'ve followed the recent thread on caller id with UK British Telecom
networks (where the caller id data is delivered before the first ring).
My understanding is that if I use a recent CVS head (e.g.
CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to
do is include the line:
usecallerid=uk
In my zapata.conf (in the [channels] section)
I've done this, but I get:
Sep 28 13:08:02 NOTICE[20498]: chan_zap.c:5119 ss_thread: Got event 2
(Ring/An
wered)...
-- Detected ring pattern: 247,97,0
-- Executing Dial("Zap/4-1", "zap/1&zap/2&zap/5|120|Ttr&quo...
2006 Dec 12
3
outgoing call on ISDN PRI
HEllo list !
When user A calls user B via Asterisk (Users A and B are registered on
the same Asterisk server ) and an ISDN PRI, user B phone
always shows Asterisk server telephone number. How to hide it and how
to forward user A number ?
We tried usecallerid, callerid, hidecallerid, restrictcid,
usecallingpres in zapata.conf but we always see Asterisk server
telephone number !
Thanks you!
2004 Oct 06
3
Re 2 x100p cards H E L P (I have no hair left)
...default
1 pstnin default
2 pstnin default
r2d2*CLI>
my /etc/asterisk/zapata.conf
[channels]
context=default
switchtype=national
signalling=fxs_ls
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=1.0
txgain=7.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
;
;
context=pstnin
signalling=fxs_ks
useca...
2004 Jul 25
1
Busydetect problems
Hi guys.
I have a XP100P Clone , and the busydetect dont work for me..
PSTN---Asterisk---Sip---Asterisk----PBX
Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work...
Please Help me.
Zapata.conf
[channels]
echocancel=yes
usecallerid=no
hidecallerid=no
rxgain=0.0
txgain=0.0
signalling=fxs_ks
callprogress=no
context=entrada
channel=>1
musiconhold=default
busydetect=yes
busycount=7
;echocancel=yes
;usecallerid=yes
;hidecallerid=no
I try compile asterisk with BUSYDETECT_MARTIN and change dsp.c for my busy tone but no results.....
2006 Feb 27
0
TE411P problem-- probably stupid.
...8zs
bchan=49-71
dchan=72
span=4,0,0,esf,b8zs
bchan=73-95
dchan=96
loadzone=us
defaultzone=us
========================
zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[channels]
busydetect=1
busycount=7
relaxdtmf=yes
callerid=asreceived
context=default
signalling=pri_cpe
usecallerid=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
switchtype=dms100
rxgain=0.0
txgain=0.0
immediate=no
signalling=pri_cpe
group=1
context=default
channel => 1-23
busydetect=1
busycount=7
relaxdtmf=yes
callerid=asreceived
context=default
signalling=pri_cpe
usecallerid=yes
transf...
2003 Nov 12
1
X100P random hangups.
...nd still random hangups. Is there another setting I should be looking at?
My zap config looks like.
context = inbound-work
include => extensions
signalling = fxs_ks
group = 1
callgroup = 1
pickupgroup = 1
usecallerid = yes
callerid = asreceived
hidecallerid = no
callwaiting = yes
callwaitingcallerid = yes
threewaycalling = yes
transfer = yes
echocancel = yes
echocancelwhenbridged = yes
rxgain = 0.6
txgai...
2006 Jun 14
2
Calls keep ringing after being picked up
...hone, I hear a dial tone and I am able to dial out.
But for some odd reason, the receiving line picks up while the outgoing line
is still ringing.
And the receiving line can hear everything while the phone is still ringing.
I tested it with my cell phone.
Here's the .conf files:
Zapata.conf
usecallerid=yes
;T1
;busydetect=no
usecallerid=yes
hidecallerid=no
context=from-pstn
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ; allows flash transfers
cancallforward=yes
language=en
;signalling=fxs_ks
signalling=em_w
rxwink=300 ; Atlas seems to use long (250ms) wink...
2008 Oct 09
2
Hang up detection with TDM400P and Telewest/Virgin Media line
Folks,
I've seen a few reports that people have had problems with hang up
detection on UK cable phone lines. I have a TDM400P with two FXO ports,
one connected to my BT line and the other connected to my
Telewest/Virgin Media cable line. If I ring the BT line and then clear
down, Asterisk detects this and acts accordingly. If I ring the
Telewest line, the clear down is not detected, hence
2004 Aug 28
5
Distinctive ring detection problem
I am trying to get distinctive ring to work on my PSTN with no luck.
I can get 2 different ring codes but it skips the context assigned...
here is my complete zapata.conf:
[channels]
signalling=fxs_ks
usecallerid=yes
rxgain=1.0
txgain=1.0
language=en
context=default
usedistinctiveringdetection=yes
dring1=134,0,0
dring2=137,0,0
dring1context=internal2
dring2context=default
channel => 1
here is the debug output:
Aug 18 10:36:20 NOTICE[1112767280]: chan_zap.c:5053 ss_thread: Got event 2 (Ri...
2005 Feb 11
1
Asterisk won't answer incoming analog line
...risk does not even recognize the ring.
Below is (I think) the relevant config files. My question is: How do I make
asterisk recognize when the phone is ringing?
Thanks in advance
lane
;zaptel.conf
fxsks=4
fxoks=1
loadzone = us
defaultzone=us
;
;zapata.conf
[channels]
language=en
rxwink=300
usecallerid=yes
cidsignalling=bell
hidecallerid=no
callwaiting=yes
usecallingpres=yes
threewaycalling=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
signalling => fxo_ks
channel => 1
signalling => fxs_ks
chann...
2005 Jun 19
0
Zaptel and Zapata Conf's
...pan 5: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxoks=97
fxoks=98
# channel 3, WCTDM, inactive.
# channel 4, WCTDM, FXO
fxsks=99
And Current Zapata.conf:
; Span 1: TE4/0/1 "TE410P (PCI) Card 0 Span 1"
; This T1 is attached to in-house CUST 3 System
;
language=en
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
immediate=no
busydetect=no
busycount=15
callprogress=no
;relaxdtmf=yes
;callerid=asreceived
faxdetect=incoming
signalling =>em_w
group = 2
channel => 1-24
; S...
2005 Feb 07
1
Group=????
...by creating separate context's for each channel type, however, I
have some things that would be easier if I could just determine which
group= setting the incoming call is on.
Example Zapata.conf:
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=3
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotrain...