Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 zapata.conf [channels] context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaitingcallerid=yes language=en immediate=no channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 --------------------------------- Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040812/aae6f0a5/attachment.htm
I'll need somethine like this
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
bchan=17-31
dchan=16
span=2,1,0,ccs,hdb3,crc4
bchan=32-46
bchan=48-62
dchan=47
Setting timing source to 0 on spans could give you some problems.. (at least
I've had them)
-------------------------------------------
channel => 1-15,17-31
channel => 32-46,48-62
Kind Regards
Claus Futtrup
----- Original Message -----
From: Angel Diaz
To: asterisk-users@lists.digium.com
Sent: Thursday, August 12, 2004 11:35 PM
Subject: [Asterisk-Users] Question about TE405P
Hi all,
Does somebody know how I have to setup my TE405P ?
Is it correct my configuration below ? Otherwise, can somebody help me ?
Thanks,
Angel.
zaptel.conf
span=1,1,0,ccs,hdb3
span=2,0,1,ccs,hdb3
span=3,0,1,ccs,hdb3
span=4,0,1,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
zapata.conf
[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
language=en
immediate=no
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
------------------------------------------------------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.737 / Virus Database: 491 - Release Date: 11-08-2004
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040813/e41ae235/attachment.htm
No - your settings are not correct. Try something like this: ZAPTEL #E400P (or TE410P in E1 mode) setup #note, may need to add ,crc4 to end of span lines: #first quad board span=1,1,0,ccs,hdb3 span=2,0,0,ccs,hdb3 span=3,0,0,ccs,hdb3 span=4,0,0,ccs,hdb3 #first quad board bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 ZAPATA: immediate=no switchtype=EuroISDN signalling=pri_net pridialplan=unknown context=incoming usecallerid=yes group=1 signalling=pri_cpe channel => 1-15,17-31 channel => 32-46,48-62 channel => 63-77,79-93 channel => 94-108,110-124 Regards Scott Stingel Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com ________________________________ From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Angel Diaz Sent: Thursday, August 12, 2004 2:35 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Question about TE405P Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 zapata.conf [channels] context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaitingcallerid=yes language=en immediate=no channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 ________________________________ Do you Yahoo!? Yahoo! Mail <http://us.rd.yahoo.com/mail_us/taglines/50x/*http://promotions.yahoo.com/ne w_mail/static/efficiency.html> - 50x more storage than other providers!
Sorry, remove that extraneous signalling=pri_net. You should just have the pri_cpe. -Scott Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com ---------------------------------------------------------------- No - your settings are not correct. Try something like this: ZAPTEL #E400P (or TE410P in E1 mode) setup #note, may need to add ,crc4 to end of span lines: #first quad board span=1,1,0,ccs,hdb3 span=2,0,0,ccs,hdb3 span=3,0,0,ccs,hdb3 span=4,0,0,ccs,hdb3 #first quad board bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 ZAPATA: immediate=no switchtype=EuroISDN signalling=pri_net pridialplan=unknown context=incoming usecallerid=yes group=1 signalling=pri_cpe channel => 1-15,17-31 channel => 32-46,48-62 channel => 63-77,79-93 channel => 94-108,110-124 Regards Scott Stingel Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com ________________________________ From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Angel Diaz Sent: Thursday, August 12, 2004 2:35 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Question about TE405P Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 zapata.conf [channels] context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaitingcallerid=yes language=en immediate=no channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 ________________________________ Do you Yahoo!? Yahoo! Mail <http://us.rd.yahoo.com/mail_us/taglines/50x/*http://promotions.yahoo.com/ne w_mail/static/efficiency.html> - 50x more storage than other providers! _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Dear all:
Does anybody know is it possible to use the board TE405P with only one port
configured as follow, or I have to use the 4 ports at the same time ?
Thanks,
Angel
ZAPTEL
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
ZAPATA
[channels]
context=menu-general
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
echocancel=yes
immediate=no
channel => 1-15,17-29
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040818/8f5e6e7a/attachment.htm
On Wednesday 18 August 2004 10:31, Angel Diaz wrote:> Does anybody know is it possible to use the board TE405P with only one > port configured as follow, or I have to use the 4 ports at the same time ?The four ports are independent of one another with one exception: they all share the same clock source (whichever port you configure as the primary source is the clocking source for the entire card). -A.