Samantha (Femtech)
2004-Oct-06 14:19 UTC
[Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)
Hi
Has anyone had any luck in putting two of these im a box?
May I ask how.... I am starting to go bald....
I do have a suggestion is make another box and link them with iax2
Thanks
Samantha
r2d2:/home/s/samantha# ztcfg -vv
Zaptel Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
r2d2:/home/s/samantha#
r2d2:/home/s/samantha# asterisk -r
Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
========================================================================Connected
to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on r2d2
(pid = 2651)
r2d2*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo pstnin default
1 pstnin default
2 pstnin default
r2d2*CLI>
my /etc/asterisk/zapata.conf
[channels]
context=default
switchtype=national
signalling=fxs_ls
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=1.0
txgain=7.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
;
;
context=pstnin
signalling=fxs_ks
usecallerid=yes
channel=>1,2
The card in the lower ide port works ok (fxo card 1)
fx2 downt accept incomming or allow outgoing
Outgoing calls end up like
r2d2:/etc/asterisk# asterisk -r
Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
========================================================================Connected
to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on r2d2
(pid = 2651)
Oct 7 07:17:24 NOTICE[1114889136]: app_dial.c:742 dial_exec: Unable to
create channel of type 'Zap'
r2d2*CLI>
Wiley E. Siler
2004-Oct-06 14:36 UTC
[Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)
Did you compile in the correct order?
Keep your scripts and try to recompile using the following order.
compile zaptel
compile asterisk
modprobe wcfxo
ztcfg -vv
Start asterisk and try your scripts out.
This hsould not matter but you can try changing the channel separater to
a dash...
channel=>1-2
You can also remove the context and signalling declarations from the top
of you zapata since the oes at the bottom are the correct ones.
Try the recompile and report back.
W
-----Original Message-----
From: Samantha (Femtech) [mailto:samantha@femtech.com.au]
Sent: Wednesday, October 06, 2004 2:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)
Hi
Has anyone had any luck in putting two of these im a box?
May I ask how.... I am starting to go bald....
I do have a suggestion is make another box and link them with iax2
Thanks
Samantha
r2d2:/home/s/samantha# ztcfg -vv
Zaptel Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS
Kewlstart (Default) (Slaves: 02)
2 channels configured.
r2d2:/home/s/samantha#
r2d2:/home/s/samantha# asterisk -r
Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
=======================================================================Connected
to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on
r2d2 (pid = 2651) r2d2*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo pstnin default
1 pstnin default
2 pstnin default
r2d2*CLI>
my /etc/asterisk/zapata.conf
[channels]
context=default
switchtype=national
signalling=fxs_ls
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=1.0
txgain=7.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
;
;
context=pstnin
signalling=fxs_ks
usecallerid=yes
channel=>1,2
The card in the lower ide port works ok (fxo card 1)
fx2 downt accept incomming or allow outgoing
Outgoing calls end up like
r2d2:/etc/asterisk# asterisk -r
Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
=======================================================================Connected
to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on
r2d2
(pid = 2651)
Oct 7 07:17:24 NOTICE[1114889136]: app_dial.c:742 dial_exec: Unable to
create channel of type 'Zap'
r2d2*CLI>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination or other use of, or taking of any action
in reliance upon, this information by persons or entities other than the
intended recipient is prohibited. If you received this in error, please contact
the sender and delete the material from any computer
listas iPfone
2004-Oct-06 16:18 UTC
[Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)
Hi... I use 2 x100p in the same box (rh9) to receive all my costumers calls... it works really good in pentium 2.0 with an assus motherbord to me. send details on your hardware and errors Miklos ----- Original Message ----- From: "Samantha (Femtech)" <samantha@femtech.com.au> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Wednesday, October 06, 2004 6:19 PM Subject: [Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)> Hi > > Has anyone had any luck in putting two of these im a box? > May I ask how.... I am starting to go bald.... > I do have a suggestion is make another box and link them with iax2 > > Thanks > > Samantha > > > > > r2d2:/home/s/samantha# ztcfg -vv > > Zaptel Configuration > =====================> > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > 2 channels configured. > > r2d2:/home/s/samantha# > > > r2d2:/home/s/samantha# asterisk -r > Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium. > Written by Mark Spencer <markster@digium.com> > ========================================================================> Connected to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on r2d2 > (pid = 2651) > r2d2*CLI> zap show channels > Chan Extension Context Language MusicOnHold > pseudo pstnin default > 1 pstnin default > 2 pstnin default > r2d2*CLI> > > > my /etc/asterisk/zapata.conf > > [channels] > context=default > switchtype=national > signalling=fxs_ls > rxwink=300 ; Atlas seems to use long (250ms) winks > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=1.0 > txgain=7.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > musiconhold=default > ; > ; > context=pstnin > signalling=fxs_ks > usecallerid=yes > channel=>1,2 > > > > The card in the lower ide port works ok (fxo card 1) > fx2 downt accept incomming or allow outgoing > Outgoing calls end up like > > r2d2:/etc/asterisk# asterisk -r > Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium. > Written by Mark Spencer <markster@digium.com> > ========================================================================> Connected to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on r2d2 > (pid = 2651) > Oct 7 07:17:24 NOTICE[1114889136]: app_dial.c:742 dial_exec: Unable to > create channel of type 'Zap' > r2d2*CLI> > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Lyle Giese
2004-Oct-06 16:35 UTC
[Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)
How about IRQ's? These cards require unique and seperate IRQ's. I used two of these cards quite well to start out with on my test * server. Lyle ----- Original Message ----- From: "Samantha (Femtech)" <samantha@femtech.com.au> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Wednesday, October 06, 2004 4:19 PM Subject: [Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)> Hi > > Has anyone had any luck in putting two of these im a box? > May I ask how.... I am starting to go bald.... > I do have a suggestion is make another box and link them with iax2 > > Thanks > > Samantha > > > > > r2d2:/home/s/samantha# ztcfg -vv > > Zaptel Configuration > =====================> > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > 2 channels configured. > > r2d2:/home/s/samantha# > > > r2d2:/home/s/samantha# asterisk -r > Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium. > Written by Mark Spencer <markster@digium.com> > ========================================================================> Connected to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on r2d2 > (pid = 2651) > r2d2*CLI> zap show channels > Chan Extension Context Language MusicOnHold > pseudo pstnin default > 1 pstnin default > 2 pstnin default > r2d2*CLI> > > > my /etc/asterisk/zapata.conf > > [channels] > context=default > switchtype=national > signalling=fxs_ls > rxwink=300 ; Atlas seems to use long (250ms) winks > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=1.0 > txgain=7.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > musiconhold=default > ; > ; > context=pstnin > signalling=fxs_ks > usecallerid=yes > channel=>1,2 > > > > The card in the lower ide port works ok (fxo card 1) > fx2 downt accept incomming or allow outgoing > Outgoing calls end up like > > r2d2:/etc/asterisk# asterisk -r > Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium. > Written by Mark Spencer <markster@digium.com> > ========================================================================> Connected to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on r2d2 > (pid = 2651) > Oct 7 07:17:24 NOTICE[1114889136]: app_dial.c:742 dial_exec: Unable to > create channel of type 'Zap' > r2d2*CLI> > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >