Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector layout matches. CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture of the PCI slots. I've seen some of the boards posted here do not in actuality have compatible slots. regards Scott Stingel Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: scott "at" evtmedia.com URL: www.evtmedia.com
Scott Stingel wrote:>Hi- > >I have posted a photo of the TE410P Digium card on my site, >so that those wishing to purchase a compatible motherboard >can see physically what the PCI slot requirement is: > >http://www.evtmedia.com/TE410P.htm > >I believe the required slot is a 64-bit, 3.3 Volt PCI, most >commonly found on Xeon-based motherboards. A 64-bit slot is >longer than the TE410P board requires, but the PCI connector >layout matches. > >CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture >of the PCI slots. I've seen some of the boards posted here do >not in actuality have compatible slots. > > >Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it does not liik like anyone has a board with a 3.3v 32bir, they all go straight to the 64bit slots which i guess is understandable.. Here is a page with some photos.. http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html Later..
Hello, Everything I've read says that 3.3v 32bit cards will work in 64 bit slots, and the cards do fit, they just have some extra space left on the slot. MATT--- -----Original Message----- From: WipeOut [mailto:wipe_out@users.sourceforge.net] Sent: Tuesday, January 13, 2004 3:15 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo Scott Stingel wrote:>Hi- > >I have posted a photo of the TE410P Digium card on my site, >so that those wishing to purchase a compatible motherboard >can see physically what the PCI slot requirement is: > >http://www.evtmedia.com/TE410P.htm > >I believe the required slot is a 64-bit, 3.3 Volt PCI, most >commonly found on Xeon-based motherboards. A 64-bit slot is >longer than the TE410P board requires, but the PCI connector >layout matches. > >CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture >of the PCI slots. I've seen some of the boards posted here do >not in actuality have compatible slots. > > >Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it does not liik like anyone has a board with a 3.3v 32bir, they all go straight to the 64bit slots which i guess is understandable.. Here is a page with some photos.. http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html Later.. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
No need to go Xeon, I have one of these: http://www.tyan.com/products/html/thunderk7x.html Dual AMD Athlon MP with one 3.3v 64bit PCI slot MATT--- -----Original Message----- From: WipeOut [mailto:wipe_out@users.sourceforge.net] Sent: Tuesday, January 13, 2004 7:07 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo mattf wrote:>Hello, > >Everything I've read says that 3.3v 32bit cards will work in 64 bit slots, >and the cards do fit, they just have some extra space left on the slot. > >MATT--- > > >Yes you are 100% correct.. A 3.3v 32bit card will just have a shorter connector on the bottom that will not extend into the 64bit area.. Unfortunately if you want 3.3v 32bit you have to get a motherboard with 64bit slots becasue I don't know of any motherboard that has 3.3v 32bit.. Also you probably will have to go Xeon.. Later..>-----Original Message----- >From: WipeOut [mailto:wipe_out@users.sourceforge.net] >Sent: Tuesday, January 13, 2004 3:15 AM >To: asterisk-users@lists.digium.com >Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo > > >Scott Stingel wrote: > > > >>Hi- >> >>I have posted a photo of the TE410P Digium card on my site, >>so that those wishing to purchase a compatible motherboard >>can see physically what the PCI slot requirement is: >> >>http://www.evtmedia.com/TE410P.htm >> >>I believe the required slot is a 64-bit, 3.3 Volt PCI, most >>commonly found on Xeon-based motherboards. A 64-bit slot is >>longer than the TE410P board requires, but the PCI connector >>layout matches. >> >>CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture >>of the PCI slots. I've seen some of the boards posted here do >>not in actuality have compatible slots. >> >> >> >> >> > >Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it >does not liik like anyone has a board with a 3.3v 32bir, they all go >straight to the 64bit slots which i guess is understandable.. > >Here is a page with some photos.. >http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html > >Later.. > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
mattf wrote:>No need to go Xeon, I have one of these: > >http://www.tyan.com/products/html/thunderk7x.html > >Dual AMD Athlon MP with one 3.3v 64bit PCI slot > > >MATT--- > >Athon MP or Xeon IMO are the same thing.. They are just the high end version of either the AMD or Intel proc respectively.. Later..
There's a BIG difference in price, depending upon what you consider the equivalent, the Xeon's are about twice as expensive as the Athlon MP's MATT--- -----Original Message----- From: WipeOut [mailto:wipe_out@users.sourceforge.net] Sent: Tuesday, January 13, 2004 8:19 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo mattf wrote:>No need to go Xeon, I have one of these: > >http://www.tyan.com/products/html/thunderk7x.html > >Dual AMD Athlon MP with one 3.3v 64bit PCI slot > > >MATT--- > >Athon MP or Xeon IMO are the same thing.. They are just the high end version of either the AMD or Intel proc respectively.. Later.. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Hi, I,m trying to pickup remote call using the SIP protocol and *8# from my phone but with no success. I just installed * 0.7.0 and my Phones are connected to one ATA 186 with image 2.16.1. I set in the sip.conf the follow parameter: callgroup=1 pickupgroup=1 for each phone. Someone can help me ?
is just *8 see ya. matteo. Il mar, 2004-01-13 alle 16:03, massimo ha scritto:> Hi, > I,m trying to pickup remote call using the SIP protocol and *8# from my > phone but with no success. > I just installed * 0.7.0 and my Phones are connected to one ATA 186 with > image 2.16.1. > I set in the sip.conf the follow parameter: > callgroup=1 > pickupgroup=1 > for each phone. > Someone can help me ? > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- Matteo Brancaleoni Espia System Administrator Email : mbrancaleoni@espia.it Web : http://www.espia.it Phone : +39 02 70633354 - ext 201 IAX(2): guest@213.140.14.155 - ext 201 Iaxtel: 1-700-56-62458 - ext 201