Displaying 20 results from an estimated 20 matches for "tdm_voic".
Did you mean:
tdm_voice
2007 Dec 02
1
setting up two asterisk server as ss7 back to back.
...p://www.voip-info.org/wiki/index.php?page=Asterisk+ss7+setup
I have the cross over cable between them.
however, wanpipe shows connected but the signaling link does not align.
i have my configs for host A
##wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = MASTER
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE...
2007 Nov 01
1
Connection astrisk to a RAS (portmaster)
...'s my planed setup :
PRI from telco <--> (port 1 of A104d) * (port 2 of A104d) <--> PM3
The PM3, for those who don't know is lucent's portmaster RAS dial-up router.
I had setup asterisk, zaptel, libpri, wanpipe (as I have sangoma's cards).
In wancfg, I have port 1 as TDM_VOICE, with hardware echo on, span 1. Port 2
is TDM_VOICE, without hw echo, Clock as master, reference 0 (for the time
being, I'm still not hooked up with my pri, will be 1 in the future), span
2. I alswo had to enable High Impedance on port 2 to operate without alarms.
Zaptel.conf:
------------...
2008 Oct 06
2
Conneting Asterisk to Swyx pri
...39;re tied down by limiting software and excessive
licensing costs.
Thanks!
Geraint
pri show spans shows all spans as up and active.
zap show status shows all as ok
wanrouter status shows all as connected
wanpipe1 and 2:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 16
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = C...
2007 Jan 03
2
Sangoma A102 w/ EC module gets intermittent echo /audio artifacts
...Running * 1.0.9, Zaptel 1.0.9, FC2 yum-updated to current, quad Xeon.
Production box, handles 2-6 thousand calls a day, snom 360 handsets w/
latest firmware, load average never goes over 2.0
My conf files:
wanpipe1.conf:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 1
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 25...
2005 Apr 30
8
Problem with Sangoma/Adtran 600 installation
I have installed Asterisk on a CentOS4 box and then installed Asterisk from
CVS.
I installed a Sangoma A101 and connected it to a Adtran 600 using a T1
Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces.
I ran through the wanpipe install instructions and configured it, now I can
run
[root@altpbx asterisk]# wanrouter hwprobe
-------------------------------
| Wanpipe Hardware Probe Info
2007 Jul 26
1
Asterisk 1.2.23 and Sangoma a102 no incoming calldetected
...onfigure the card for CAS, it will never connect.
My card is currently configured (and makes only outgoing calls) as:
E1 PRI, CCS, HDB3,NCRC4 (i have no idea what dss1 is or where it goes)
My /etc/wanpipe/wanpipe1.conf is:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 4
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = C...
2005 May 15
0
Re: Asterisk-Users Digest, Vol 10, Issue 114
...f you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 1
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate = 2048
MTU = 2048
UDPP...
2007 Jul 26
1
Asterisk 1.2.23 and Sangoma a102 no incoming call detected
...onfigure the card for CAS, it will never connect.
My card is currently configured (and makes only outgoing calls) as:
E1 PRI, CCS, HDB3,NCRC4 (i have no idea what dss1 is or where it goes)
My /etc/wanpipe/wanpipe1.conf is:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 4
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = C...
2006 Nov 16
1
Sangoma A101 gives 'no PRI configured on span 1' error
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and
installation was successful. zttool, ztcfg, all show card is installed
properly. I copied the parameters from my old working zaptel.conf,
zapata.conf and zapata-auto.conf. Verified on Sangoma website that these
files are correct. Also configured wanpipe1.conf.
But doing all this didn't start the PRI channels. It says
2007 Jul 03
1
Distinctive ring detection not detecting ring cadences
...t to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_ANALOG, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 6
PCIBUS = 1
FE_MEDIA = FXO/FXS
TDMV_LAW = MULAW
TDMV_OPERMODE = FCC
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT...
2010 Apr 01
2
Problem with Sangoma A104 and euroisdn pri
...nd debugging output:
==begin zaptel.conf ====================
loadzone=us
defaultzone=us
span=1,0,0,ccs,hdb3
bchan=1-15,17-31
hardhdlc=16
==end zaptel.conf ======================
==begin wanpipe1.conf ==================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 13
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE...
2006 Mar 11
1
FW: I need to set NO CRC4 on zaptel.conf?
...an = 3,3,0,ccs,hdb3,crc4,yellow
span = 4,4,0,ccs,hdb3,crc4,yellow
#channel definitions
#bchan = 1-15, 17-31, 32-46, 48-62, 63-77, 79-93, 94-108, 110-124
#dchan = 16,47,78,109
bchan = 1-15,17-124
dchan = 16
my wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 13
PCIBUS = 6
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE...
2014 Aug 01
1
load testing and pattern testing sangoma A116 card
...how to validate this setup?
I am running all this on ubuntu lucid, kernel 2.6.32.
Asterisk version 11.5.0
Dahdi 2.6.1
Wanpipe 7.0.3
Here's a few config snippets:
wanpipe1.conf (the other wanpipe.conf files are similar)
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 5
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = C...
2005 May 27
0
Re: Asterisk-Users Digest, Vol 10, Issue 215
...f you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = YES
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SP...
2006 Dec 20
5
Sangoma A101 with Unicall
...h FCS check on channel
16.
Here is my /etc/zaptel.conf
# MFC/R2 normalmente no usa CRC4
span=1,0,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
This configuration works with Digium cards. Here is the wanpipe1.conf
file:
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE...
2005 Sep 27
4
BAD echo problems with Sangoma and Telstra
...s
echocancelwhenbridged=yes
echotraining=yes
adsi=no
callprogress=no
switchtype => euroisdn
signalling => pri_cpe
callgroup => 1
group => 1
immediate => no
channel => 1-10
##EOF
##/etc/wanpipe/wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 0
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
ACTIVE_CH = AL...
2009 Apr 06
3
Sangoma and BT single lines
Hi, got a Sangoma A200 with a bunch of extension cards and having real
problems getting it to deal with a normal single BT line
Symptoms are that incoming calls are fine. Outgoing calls ring the far
end, BUT asterisk never sees that the call is answered (ie no message in
the logs files saying so), as a result the remove end can hear the PBX
side talking, but there is no audio back from the
2006 Apr 07
1
Inbound PRI calls drop after 5 seconds using Sangoma A101
...1-23
dchan = 24
Here's the Zapata files
------------------------------------
[channels]
zcontext = from-pstn
switchtype = national
pridialplan = national
signalling = pri_net
group = 0
channel => 1-23
wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 5
PCIBUS = 2
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE...
2005 Sep 05
0
Re: Asterisk-Users Digest, Vol 14, Issue 22
...f you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = YES
FE_TXTRISTATE = NO
MTU = 2100
UDPPORT = 9000
TT...