Hi, I have a FAX machine connected to a TDM400 card FXS port. When I receive a fax call through X100 and transfer it to that extension, the FAX machine display REC, but nothing happen (no fax received). There is something special to be done for this configuration? Thanks, Dan
Andrew Joakimsen
2003-Dec-05 02:34 UTC
[Asterisk-Users] FAX connected to a TDM400 card port
No, but I wouldn't expect it to work because of the echo issues with the X100P cards.> -----Original Message----- > From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- > admin@lists.digium.com] On Behalf Of Dan > Sent: Friday, December 05, 2003 4:27 AM > To: Asterisk Users > Subject: [Asterisk-Users] FAX connected to a TDM400 card port > > Hi, > > I have a FAX machine connected to a TDM400 card FXS port. > When I receive a fax call through X100 and transfer it to thatextension,> the FAX machine display REC, but nothing happen (no fax received). > There is something special to be done for this configuration? > > Thanks, > Dan > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users
On Friday 05 December 2003 04:27 am, Dan wrote:> Hi, > > I have a FAX machine connected to a TDM400 card FXS port. > When I receive a fax call through X100 and transfer it to that extension, > the FAX machine display REC, but nothing happen (no fax received). > There is something special to be done for this configuration? > > Thanks, > DanYou transfer it manually ??? Why ? My Fax machine is on Zap/4, which is the third port on the TDM400P card. extensions.conf [your context for extensions] exten => 22,1,Dial(Zap/4,20,d) ; Ring for 20 seconds, request a low latency call exten => 22,2,Hangup [your incoming call context] exten => fax,1,Goto(22,1) Works fine for me. Regards...Martin -- There are ten or twenty basic truths, and life is the process of discovering them over and over and over. -- David Nichols
Hi, ----- Original Message ----- From: "John Vozza" <john@netrom.com> To: <asterisk-users@lists.digium.com> Sent: Friday, December 05, 2003 3:27 PM Subject: Re: [Asterisk-Users] FAX connected to a TDM400 card port> I have a similar setup and have found that faxing, sending or receiving > works at best 50% of the time. I finally hooked the fax machine to the > second RJ-11 jack of the x100p and set it to listen for fax tones and to > grab the line from asterisk if it hears a fax. (Actually I may have a "Y" > adapter going into the x100p either way the idea is the incoming line goes > to both the x100p and the fax machine)This is exactly what I have done to solve this issue, but... unfortunatelly it is not the best option in terms of functionality.> > I spent many hours and days trying to get it to work reliably but no > dice...Me too..:-( Thank you and best regards, Dan
I have exactly that configuration, and it's working fine for me. I have the following config which may or may not be relevant to fax working... echocancelwhenbridged = no callprogress = no I've heard that there have been echo problems when ring and tip are reversed... but mine havn't ever been reversed so I can neither confirm nor deny this. Sam Quoting Dan <dtoma@fx.ro>:> Hi, > > I have a FAX machine connected to a TDM400 card FXS port. > When I receive a fax call through X100 and transfer it to that extension, > the FAX machine display REC, but nothing happen (no fax received). > There is something special to be done for this configuration? > > Thanks, > Dan > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >------------------------------------------------- This mail sent through IMP: http://horde.org/imp/