search for: t410p

HI, I'm trying to config a span from port 2 of a DIgium T410p to a Brooktrout TR114-P8V-T1 card. I have a T1-PRI from the TELCO in port 1 (thru first port) working just fine with Asterisk 1.0.3 - been working fine for some time now. No problem with dialplan PSTN calls. Now I'd like to "route" specific DID numbers in thru the TELCO T1-PRI and...

[moved from -dev, as the thread is better suited for -users] At 5:10 PM -0600 1/30/04, James Sharp wrote: > > I've pretty much got the routing covered at this point, I'm just not sure >> how to get the Asterisk system to answer and give me dialtone immediately. >> Any ideas or recommendations would be greatly appreciated. > >app_disa will give answer and give

Hi all, Has anyone got any experience with hooking Asterisk up with a Siemens EWSD 13 switch over a E1/PRI ? We're located in Belgium (Europe) and one of our telecom partners uses this switch. We connected one of our TE410P ports with their switch, but the status light on the TE410P card keeps blinking red. On their side they are getting a DSA (distance service alarm) error, so this

Hello Everyone, What kind of hardware setup would I need to do if I want a T1 connection to PSTN and have 48 users in office with analog phones. Will something work if I have a T410P card in asterisk and have one T1 going to PSTN and other two to a channel bank. I would then connect the 48 phones (FXS) to the channel bank! Thanks. Deepak

Hi, Is this card the same as the T410P, after all, it's made by Digium. There's one prior reference on the mailint list[1] but it didn't answer the question. There was also an SS7 status report[2] last June but it's doesn't seem to have lead anywhere either. There was post saying an SS7 release was immenent last Sep...

...port. The plan was to use one of my 4 E1 ports to connect to the Telstra onramp and one to the MP104. I have since discovered however that the MP104 only supports CAS signalling and I am having trouble getting asterisk to work in this mode. Currently we have Onramp (Australian PRI) ---- port 1 of T410P --- asterisk --- port 2 or T410P --- MP104 In zaptel.conf I have span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,cas,hdb3 cas=32-46:1101 cas=48-62:1101 And this seems to not complain. Some examples ive found on the net have a dchan=47 but I then get a HDLC error from ztcfg In zapa...

...i, Using MeetMee(1234,M) on asterisk 1.6.2.9 (debian/testing) we have terrible sound: the MOH is unrecognizable and speakers can't be understood; it sounds "ghostly". However the prompts ("your are the only one in this conference, etc.") sound fine. Our server has a Digium T410P card with two E1 lines going in and the wct4xxp dahdi module. Any idea?

...ng, please edit your Subject line so it is more specific than "Re: Contents of Asterisk-Users digest..." Today's Topics: 1. Re: Still unable to use g729 codec... please HELP (Rodolfo Grave) 2. Re: Can't Receive/Send Calls (Norman Zhang) 3. RE: Zaptel/Zapata config from T410p to Brooktrout T1 (Jason Kawakami) 4. Re: Still unable to use g729 codec... please HELP (Kristian Kielhofner) 5. Re: Still unable to use g729 codec... please HELP (Rodolfo Grave) 6. Re: Still unable to use g729 codec... please HELP (Kristian Kielhofner) 7. Re: hint ext...

I would like to set up an Asterisk PBX for my office in Colombia. Currently we have 13 lines and I want to acquiere a channel bank with enough FXO ports to handle the lines, working with a T100P or a T410P card. I have spotted some candidates at EBay... Problem is that Pay Pal cannot handle payments from my country, Colombia. Has anybody in the list any equipment that fits this application for sale? Exitos, Juan C Garces

All, I know the question has been asked before, but any of the solutions posted in the past have not solved my problem. I have got a Asterisk setup using a P4 1.8 / 512mb server running Redhat Enterprise 3 and 3 grandstream budgetone phones (plus a couple of xten clients on windows) and I'm at advanced stage of testing to see if asterisk will fill our needs as a PBX using voice over IP

...ur 64-bit 3.3v PCI slots. First, we tried to get one of the PE 600 working, putting the Digium cards on it. We've put the T100P on the 32-bit slot (which is the slot 0) and the the E100P on the first 64-bit slot. Searching for the T100P and E100P documentation, I've found only that the T410P works fine on 64-bit 3.3v PCI slots, but could not find any saying that wouldn't on the 64-bit 3.3v PCI slots. After loading the module (wct1xxp) and starting the Asterisk, everything seems to be right. But after 3 or 4 calls, the problems begins. During the conversation, you can hear pop&...

hi, all I have problem to sense digit in my ivrs. scenario is below: I am using zaptel T410P digium card to competible with my PSTN(CORAL) [ivrs] exten => s,1,Background(welcome-ivrs) exten => 1,1,Playback(welcome) exten => 2,1,Playback(goodby) sound file are .wav files. when i dial no. from analog phone to launch ivrs welcome-ivrs.wav file plays and when i press digit 1 play we...

...terisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Roland Zagler Sent: Wednesday, 20 July 2005 4:52 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hello list, Did anyone already get the T410P card running in an HP-Compaq DL380 G4 server? If yes, how? I'm using Fedora Core 3 with 2.6.11-1.35_FC3smp Kernel package. Thanks in advance, Roland _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/list...

Our setup: We have a DS3 from Global Crossing terminating into a Adtran MX2800 M13 mux. From there, groups of 4 T1's run into T410P digium cards to 7 individual servers. Each trunk is configured as ISDN PRI, B8ZS/ESF, D-channel being chan 96 with B-channels of 1-95 (we're using NFAS). The D channel is up and there are no alarms. We see the connection on the console from the incoming user as seen below, if the user ha...

Hey all. We have a DS3 circuit with GBLX split off into 7 systems with a 4 port sangoma card (A104D) in the first 2 systems, and digium T410P cards in the other 5. GBLX numbers their spans from 0 to 3 instead of 1-4 and we have a NFAS configuration with the d-channel on chan 96. All of our systems are running 1.0.7 for stability reasons (and no good time for maintaince, the entire platform is used most of the day) but if an upgrad...

...I hang up. I'm using a bt buisness highway line which is isdn2e comaptible but doesn't provide power on the digital socket. Any suggestions on how to resolve this would be greatly appreciated. I can find nothing on this in the list archives (though similar errors have been seen using a t410p card under high call load: http://lists.digium.com/pipermail/asterisk-users/2004-March/040745.html ) I'm using the bri-stuff rc15 from: http://www.junghanns.net/asterisk/downloads/bri-stuff-0.0.2rc15.tar.gz Thanks in advance for any suggestions, regards, Julien -------------- next part...

Ok trying this again... is there anyone using the SPA-3000 with * ???? I am not sure if this is a specific problem to it or not. This is something I really need to fix!!! When dialing out using * interfaced to an SPA-3000, fxs,fxo, I cannot access (reliably) DTMF menus at the called party, after call completion. Dialing DTMF is fine. I checked by calling myself. Listening to either end on a

i cannot see caller ID of the call originated from outside zap channel. i hv configured both zapata.conf and extensions.conf. i m right now in india i think asterisk only supports Bellcore enable caller ID. so is it the same bug of BT caller ID problem in UK? or it is the bug of my asterisk configuration? i hv enabled callerID from my TELCO. -------------- next part -------------- An HTML

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the