search for: t305

...1" from me and came back with this: ----quote--- Please check your timers below. How did you determine your settings? * Timer and counter settings: N200: 3 N202: 3 K: 7 T200: 1000 T201: 1000 T202: 2000 T203: 10000 T303: 4000 T305: 30000 T308: 4000 T309: 6000 Our switch: Telcordia National ISDN 2: Range 10 - 90 seconds, default 90 seconds. * T312: 6000 T313: 4000 T316: -1 Our switch: Telcordia National ISDN 2: Range 10 - 120 seconds, default 30 seconds. N316: 2 T-HO...

...arms, everything looks good. PRI, however, refuses to work... pbx*CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Evidently, this is a Lucent 5ess switch but I am supposed to use national. I have tried both, and every combination of pri_cpe, pri_net, switchtype, etc. to no avail. The McLeod switch tech says that everything looks fine on thei...

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

...r by the physical span with the primary d channel) shows: localhost*CLI> pri show span 5 Primary D-channel: 120 Status: Provisioned, Up, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Secondary D-channel: 24 Status: Provisioned, Up, Standby Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Time...

...62 zaptel 226820 129 wct4xxp # asterisk -r gw*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, In Alarm, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3

...verbose for both inbound and outbound. pbx*CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Up, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 1 Retrans: 0 Busy: 0 Overlap Dial: 0 Logical Channel Mapping: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100512/a154a9c3/attachment.htm

Hi, I have debian etch 4.0 machine (2.6.18) with two TW-ISDN PCI (Hfc) cards. I use bristuff-0.3.0-PRE-1y-e (asterisk-1.2.17,libpri-1.2.4,zaptel-1.2.16). I also have patched zaphfc with zaphfc_0.4.0-test1_florz-13.diff.gz (I load module: insmod /usr/src/bristuff-0.3.0-PRE-1y-e/zaphfc/zaphfc.ko modes=1 debug=1). So i want to test two cards and make loop between them. So one card would be NT,

...t;PRI span 1/0: Provisioned, Down, Active" and a "pri show span 1" reports: Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 (a) What is causing this? (b) How can it be fixed? (c) Why does Asterisk not recover automatically to what appears to be an intermittent problem? -- George Pajari (dCAP), netVOICE communications 604 484 VOIP(8647) x1...

...span at 'eth1/00:30:48:84? RED 0 0 0 *CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: Lucent 5E Type: Network Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Current zaptel modules loaded: ztd_eth 6660 0 ztdynamic 10452 1 ztd_eth wct4xxp 104000 24 zaptel 223236 54 ztdynamic,wct4xxp ---- On the secondary machine /etc/zaptel.conf:...

...his is shown in a pri show span in the CLI (with no cable connected): pri show span 2 Primary D-channel: 40 Status: Provisioned, In Alarm, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 *CLI> pri show span 3 Primary D-channel: 71 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Tim...

...12 channels configured. pro show span 1: ================ asterisk*CLI> pri show span 1 Primary D-channel: 3 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE (PtMP) Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 asterisk*CLI> asterisk*CLI> pri show span 1 Primary D-channel: 3 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE (PtMP) Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1...

...so noticed this: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 The status needs to be "Provisioned, Up, Active." Following Sangoma's instructions for debugging an Asterisk PRI span, I can confirm that there are only outgoing frames and that the D-cha...

...OK 0 0 0 T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0 pbxzg1*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Notice "Status: Provisioned, Down, Active". This "Down" is what I'm woried about. I have search list and Internet and explanation I could find is that my D channel is down (for some reason). I have put jumper...

Is anybody else using the following combination: * a TE410P card (wct4xxp driver) * a BT ISDN connection * DAHDI 2.3.0.1 * Asterisk 1.6.2.9 I'm trying to configure a new box to replace a legacy system (same hardware; some old version of Asterisk with Zaptel; works lovely but hopelessly out-of-date) and not having much joy. Specifically, I couldn't get it to see a D-channel on

Hello, I have following problem with Sangoma A104 card: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 NOTICE[16509]: chan_zap...

...e type: RELEASE COMPLETE (90) Here is the config for that span: pbxarrgon*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Up, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not availabl...

...ssues. Everything seems to be installed in the correct manner. asterisk*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 However, when we try and make a call: -- Executing Dial("SIP/sgupta-901d", "ZAP/1/32953295") in new stack Mar 24 11:11:31 NOTICE[987]: app_dial.c:746 dial_exec: Unable to create channel of type 'ZAP' =...

Hi, I've a busy server where one E1/PRI span has been behaving oddly. Here's the span: Primary D-channel: 16 Status: Provisioned, Up, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Looks good, eh? But every attempt to make a call on that span fails with status CHANUNAVAIL: May 23 10:22:23 DEBUG[6425]: Launching 'Dial' May 23 10:22:23 VERBOSE[6425]: -- Executing Dial("SIP/monitor-93b6", &q...

...e problem with E1 line between Asterisk computer and our PBX Matra: asta*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 My configuration: 2xPIII/1000, 1GB RAM, SCSI disk. Distro Ubuntu Dapper, asterisk version 1.2.7.1.dfsg-2ubuntu3.1, zapata driver version 1.2.5-1, kernel 2.6.15-26-686. My configuration files: /etc/zaptel.conf: span=1,1,0,ccs,hdb3,cr...

...of my two Q.SIG spans, I see this: asterisk*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Up, Active Switchtype: Q.SIG switch Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 1 Logical Channel Mapping: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 Overlap Recv: Yes Same, for pri show span 4 Logical Channel Mapping is 0, but should be 1. It is configured in chan_dahdi.conf as described here: https://issues.asterisk.org/view.php?id=13454 Anyone seen this problem?...