Tomislav Parčina
2006-May-23 01:22 UTC
[Asterisk-Users] Status: Provisioned, Down, Active - Long
Hi list!
I'm trying to setup Digium TE205P E1 card to work with my provider (and
Ericsson BP 250 - this comes later). When I execute "pri show span 1"
this is what I get.
pbxzg1*CLI> zap show status
Description Alarms IRQ bpviol CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0
pbxzg1*CLI> pri show span 1
Primary D-channel: 16
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Notice "Status: Provisioned, Down, Active". This "Down" is
what I'm woried about. I have search list and Internet and explanation I
could find is that my D channel is down (for some reason). I have put jumpers
for E1 (1-2 and 3-4 are connected). And those are mine extensions, zaptel and
zapata conf files.
extensions.conf
include => pomoc
exten => _0.,1,NoOp(${CALLERID(name):0:4})
exten => _0.,n,NoOp(${CALLERID(number)})
exten => _0.,n,GotoIf($["${CALLERID(name):0:4}" =
"Lama"]?4:6)
exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,TW) ; W - calling user to start
recording *1
exten => _0.,n,Hangup
exten => _0.,n,Set(CALLERID(name)=Vanjski poziv)
exten => _0.,n,Set(CALLERID(number)=100)
exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,tw) ; w - caled user to start
recording *1
exten => _0.,n,Hangup
zaptel.conf
span=1,1,0,cas,hdb3 # koristiti ovo - da se koristi telco's clock as timing
source for the card
bchan = 1-15,17-31
dchan = 16
loadzone = it
defaultzone = it
zapata.conf
[channels]
context=zap-in
switchtype=euroisdn
pridialplan=unknown
prilocaldialplan=unknown
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
callprogress=no
callerid=asreceived
group=1
signalling=pri_cpe ; pri_cpe - kad se povezujem s provjaderom, pri_net kad sam
ja provider (dva asteriska)
channel => 1-15,17-31
When I call out this is what I see on CLI
-- Executing NoOp("SIP/148-74a3", "Lama") in new stack
-- Executing NoOp("SIP/148-74a3", "888") in new stack
-- Executing GotoIf("SIP/148-74a3", "1?4:6") in new stack
-- Goto (sip,00989970434,4)
-- Executing Dial("SIP/148-74a3", "Zap/g1/0989970434|60|TW")
in new stack
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Hangup("SIP/148-74a3", "") in new stack
== Spawn extension (sip, 00989970434, 5) exited non-zero on
'SIP/148-74a3'
I'm working on this for more than 7 hours and I haven't made any
progress :((
Thank you for your help.
--
Tomislav Par?ina
Lama Computers Split
Stinice 12, 21000 Split
Tel.: +385(21)495148
SIP: tomo@pbx.lama.hr
e-mail: tparcina#lama.hr
http://www.lama.hr <http://www.lama.hr/>
Tony Mountifield
2006-May-23 02:05 UTC
[Asterisk-Users] Re: Status: Provisioned, Down, Active - Long
In article <79337FA3BA80774F9FE87BF809C9F35614EE75@stipe.lama.hr>, Tomislav Parèina <tparcina@lama.hr> wrote:> Hi list! > > I'm trying to setup Digium TE205P E1 card to work with my provider (and Ericsson BP 250 - > this comes later). When I execute "pri show span 1" this is what I get. > > pbxzg1*CLI> zap show status > Description Alarms IRQ bpviol CRC4 > T2XXP (PCI) Card 0 Span 1 OK 0 0 0 > T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0 > pbxzg1*CLI> pri show span 1 > Primary D-channel: 16 > Status: Provisioned, Down, Active > Switchtype: EuroISDN > Type: CPE > Window Length: 0/7 > Sentrej: 0 > SolicitFbit: 0 > Retrans: 0 > Busy: 0 > Overlap Dial: 0 > T200 Timer: 1000 > T203 Timer: 10000 > T305 Timer: 30000 > T308 Timer: 4000 > T313 Timer: 4000 > N200 Counter: 3 > > Notice "Status: Provisioned, Down, Active". This "Down" is what I'm woried about. I have > search list and Internet and explanation I could find is that my D channel is down (for some > reason). I have put jumpers for E1 (1-2 and 3-4 are connected). And those are mine > extensions, zaptel and zapata conf files. > > extensions.conf > > include => pomoc > exten => _0.,1,NoOp(${CALLERID(name):0:4}) > exten => _0.,n,NoOp(${CALLERID(number)}) > exten => _0.,n,GotoIf($["${CALLERID(name):0:4}" = "Lama"]?4:6) > exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,TW) ; W - calling user to start recording *1 > exten => _0.,n,Hangup > exten => _0.,n,Set(CALLERID(name)=Vanjski poziv) > exten => _0.,n,Set(CALLERID(number)=100) > exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,tw) ; w - caled user to start recording *1 > exten => _0.,n,Hangup > > zaptel.conf > > span=1,1,0,cas,hdb3 # koristiti ovo - da se koristi telco's clock as timing source for the card > bchan = 1-15,17-31 > dchan = 16 > loadzone = it > defaultzone = it > > zapata.conf > > [channels] > context=zap-in > switchtype=euroisdn > pridialplan=unknown > prilocaldialplan=unknown > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > echocancel=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > callprogress=no > callerid=asreceived > group=1 > signalling=pri_cpe ; pri_cpe - kad se povezujem s provjaderom, pri_net kad sam ja provider (dva asteriska) > channel => 1-15,17-31 > > When I call out this is what I see on CLIThere is no point trying to make calls until the PRI status changes from "Down" to "Up". In zaptel.conf, you need to change the span from cas to ccs - that might be enough to fix the problem. ISDN protocol always uses ccs, not cas. You will need to shutdown asterisk and zaptel, make the change, then start zaptel and asterisk. Or else just reboot after making the change. If you then get messages saying the other end thinks its is a CPE, you will also need to change signalling=pri_cpe to signalling=pri_net in zapata.conf and restart asterisk. Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org