I've got a system with 5 pri circuits configured into a CFAS group with a primary and secondary d channel. There are three TE410P cards in the system. The 5 circuit span are located as follows: circuit 1 on span 5 circuit 2 on span 1 circuit 3 on span 6 circuit 4 on span 2 circuit 5 on span 9 primary d chan is on chan 24 of span 5 (chan 120) secondary d chan is on chan 24 of span 1 (chan 24) T1 circuits are configured correctly in zaptel.conf and show up and good zapata looks like this: trunkgroup => 1,120,24 spanmap => 1,1,2 spanmap => 2,1,4 spanmap => 5,1,1 spanmap => 6,1,3 spanmap => 9,1,5 [channels] signalling=pri_cpe switchtype=national pridialplan=unknown ;group 1 group=1 context=cfas-in channel=1-23 channel=25-48 channel=97-119 channel=121-144 channel=193-216 ---------- pri show span 5 (seems it sets the span number by the physical span with the primary d channel) shows: localhost*CLI> pri show span 5 Primary D-channel: 120 Status: Provisioned, Up, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Secondary D-channel: 24 Status: Provisioned, Up, Standby Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 --- When the system is started, or I issue a ztcfg command, I see the following: Dec 10 13:31:40 WARNING[5649]: chan_zap.c:7569 pri_dchannel: Restart requested on odd/unavailable channel number 0/1 I get this for 0/1 through 0/23 When an inbound call to this CFAS group is placed, I receive the following: Dec 10 13:43:06 WARNING[5649]: chan_zap.c:7640 pri_dchannel: Ring requested on unconfigured channel 0/1 on span 5. What am I doing wrong here to cause this unconfigured error? The provider is seeing both of my d channels, so I have the spans mapped right. -Chris