thr3ads.net - asterisk users - [Asterisk-Users] Fax over 2 bridged TE110P channels [Apr 2006]

If this information is useful, please help other people find it:
Share via:

Alessio Focardi

2006-Apr-04 02:11 UTC

[Asterisk-Users] Fax over 2 bridged TE110P channels

Hi,

I have an asterisk installation with 2 E1 cards

Software version is

Asterisk 1.2.6
Libpri 1.2.2
Zaptel 1.2.5

I'm having problem with fax transmission, let me explain better my
setup:


My fist TE110P E1 card is connected to the telco line
the second TE110P E1 one to an Nexspan PBX

so the server is basically sitting between the line, and the pbx.

every call coming from the line is simply redialed in the pbx
every call from pbx is simply redialed to the line
no answer is done

All is working great with voice, but faxing often results in error, both
receiving and sending.

I have disabled echo cancel, and also checked for interrupts problems
and other common misconfiguration problems.


Would someone please help me sort this out ?
I'm suspecting sync problems ...

Tnx for any help!



Following are some debug and config files


zaptel.conf


loadzone = it
defaultzone = it


span=1,1,0,ccs,hdb3,crc4

bchan=1-15
dchan=16
bchan=17-31

span=2,0,0,ccs,hdb3,crc4

bchan=32-46
dchan=47
bchan=48-62


zapata.conf

[channels]

switchtype = euroisdn


;line
signalling=pri_cpe
pridialplan=unknown
switchtype=euroisdn
priindication = outofband
echocancel=no
overlapdial=yes
immediate=no
nationalprefixinternationalprefixresetinterval=300
context=pri1
group=1
channel => 1-15
channel => 17-31

;pbx
signalling=pri_net
pridialplan=international
switchtype=euroisdn
priindication=outofband
echocancel=no
overlapdial=yes
immediate=no
nationalprefixinternationalprefixresetinterval=300
context=pri2
group=2
channel => 32-46
channel => 48-62

pri1 context

exten=>_X.,1,Dial(Zap/g2/${EXTEN}||j)
exten=>_X.,2,Congestion()
exten=>_X.,102,Busy()

pri2 context

exten=>_X.,1,Dial(Zap/g1/${EXTEN}||j)
exten=>_X.,2,Congestion()
exten=>_X.,102,Busy()


 cat /proc/interrupts
           CPU0
  0: 1114420235          XT-PIC  timer
  1:          8          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5: 1114083499          XT-PIC  t1xxp
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:    2531734          XT-PIC  eth0
 12: 1114121836          XT-PIC  t1xxp
 14:     306435          XT-PIC  ide0
NMI:          0


lspci -v

00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645 Host & Memory
&
AGP Controller (rev 01)
        Flags: bus master, medium devsel, latency 32
        Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
bridge (AGP) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: dde00000-dfefffff
        Prefetchable memory behind bridge: d9c00000-ddcfffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media
IO]
        Flags: bus master, medium devsel, latency 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
        Flags: medium devsel
        I/O ports at 0c00 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 80 [Master])
        Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
(A,B step)
        Flags: bus master, fast devsel, latency 128
        I/O ports at ff00 [size=16]

00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 90)
        Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
Adapter
        Flags: bus master, medium devsel, latency 64, IRQ 10
        I/O ports at dc00 [size=256]
        Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at dffa0000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2

00:08.0 ISDN controller: Cologne Chip Designs GmbH: Unknown device 16b8 (rev
01)
        Subsystem: Cologne Chip Designs GmbH: Unknown device b562
        Flags: medium devsel, IRQ 11
        I/O ports at d800 [size=8]
        Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

00:09.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
        Subsystem: Unknown device 6159:0001
        Flags: bus master, medium devsel, latency 64, IRQ 5
        I/O ports at d400 [size=256]
        Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

00:0a.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
        Subsystem: Unknown device 6159:0001
        Flags: bus master, medium devsel, latency 64, IRQ 12
        I/O ports at d000 [size=256]
        Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2
Pro] (rev 11) (prog-if 00 [VGA])
        Subsystem: Diamond Multimedia Systems Viper V770 Ultra
        Flags: bus master, 66Mhz, medium devsel, latency 64
        Memory at de000000 (32-bit, non-prefetchable) [size=16M]
        Memory at da000000 (32-bit, prefetchable) [size=32M]
        Expansion ROM at dfef0000 [disabled] [size=64K]
        Capabilities: [60] Power Management version 1
        Capabilities: [44] AGP version 2.0
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060404/f15c1618/attachment.htm

cguy@bigpond.net.au

2006-Apr-04 06:57 UTC

head link

[Asterisk-Users] Fax over 2 bridged TE110P channels

To me, your * config files look correct.  At a guess I'd say the problem is
in your motherboard.  It is a sis chipset and from the look of things a couple
years old.  Try running the system on an intel chipset motherboard and see how
you go.

Alternately, if you are running X windows, then disable that and see if it
improves things.

Craig

---- Alessio Focardi <afocardi@gmail.com> wrote: > Hi,
> 
> I have an asterisk installation with 2 E1 cards
> 
> Software version is
> 
> Asterisk 1.2.6
> Libpri 1.2.2
> Zaptel 1.2.5
> 
> I'm having problem with fax transmission, let me explain better my
> setup:
> 
> 
> My fist TE110P E1 card is connected to the telco line
> the second TE110P E1 one to an Nexspan PBX
> 
> so the server is basically sitting between the line, and the pbx.
> 
> every call coming from the line is simply redialed in the pbx
> every call from pbx is simply redialed to the line
> no answer is done
> 
> All is working great with voice, but faxing often results in error, both
> receiving and sending.
> 
> I have disabled echo cancel, and also checked for interrupts problems
> and other common misconfiguration problems.
> 
> 
> Would someone please help me sort this out ?
> I'm suspecting sync problems ...
> 
> Tnx for any help!
> 
> 
> 
> Following are some debug and config files
> 
> 
> zaptel.conf
> 
> 
> loadzone = it
> defaultzone = it
> 
> 
> span=1,1,0,ccs,hdb3,crc4
> 
> bchan=1-15
> dchan=16
> bchan=17-31
> 
> span=2,0,0,ccs,hdb3,crc4
> 
> bchan=32-46
> dchan=47
> bchan=48-62
> 
> 
> zapata.conf
> 
> [channels]
> 
> switchtype = euroisdn
> 
> 
> ;line
> signalling=pri_cpe
> pridialplan=unknown
> switchtype=euroisdn
> priindication = outofband
> echocancel=no
> overlapdial=yes
> immediate=no
> nationalprefix> internationalprefix> resetinterval=300
> context=pri1
> group=1
> channel => 1-15
> channel => 17-31
> 
> ;pbx
> signalling=pri_net
> pridialplan=international
> switchtype=euroisdn
> priindication=outofband
> echocancel=no
> overlapdial=yes
> immediate=no
> nationalprefix> internationalprefix> resetinterval=300
> context=pri2
> group=2
> channel => 32-46
> channel => 48-62
> 
> pri1 context
> 
> exten=>_X.,1,Dial(Zap/g2/${EXTEN}||j)
> exten=>_X.,2,Congestion()
> exten=>_X.,102,Busy()
> 
> pri2 context
> 
> exten=>_X.,1,Dial(Zap/g1/${EXTEN}||j)
> exten=>_X.,2,Congestion()
> exten=>_X.,102,Busy()
> 
> 
>  cat /proc/interrupts
>            CPU0
>   0: 1114420235          XT-PIC  timer
>   1:          8          XT-PIC  i8042
>   2:          0          XT-PIC  cascade
>   5: 1114083499          XT-PIC  t1xxp
>   8:          1          XT-PIC  rtc
>   9:          0          XT-PIC  acpi
>  10:    2531734          XT-PIC  eth0
>  12: 1114121836          XT-PIC  t1xxp
>  14:     306435          XT-PIC  ide0
> NMI:          0
> 
> 
> lspci -v
> 
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645 Host &
Memory &
> AGP Controller (rev 01)
>         Flags: bus master, medium devsel, latency 32
>         Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
>         Capabilities: [c0] AGP version 2.0
> 
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
> bridge (AGP) (prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 64
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>         Memory behind bridge: dde00000-dfefffff
>         Prefetchable memory behind bridge: d9c00000-ddcfffff
> 
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media
> IO]
>         Flags: bus master, medium devsel, latency 0
> 
> 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
>         Flags: medium devsel
>         I/O ports at 0c00 [size=32]
> 
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> (prog-if 80 [Master])
>         Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
> (A,B step)
>         Flags: bus master, fast devsel, latency 128
>         I/O ports at ff00 [size=16]
> 
> 00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
> Fast Ethernet (rev 90)
>         Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
> Adapter
>         Flags: bus master, medium devsel, latency 64, IRQ 10
>         I/O ports at dc00 [size=256]
>         Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
>         Expansion ROM at dffa0000 [disabled] [size=128K]
>         Capabilities: [40] Power Management version 2
> 
> 00:08.0 ISDN controller: Cologne Chip Designs GmbH: Unknown device 16b8
(rev
> 01)
>         Subsystem: Cologne Chip Designs GmbH: Unknown device b562
>         Flags: medium devsel, IRQ 11
>         I/O ports at d800 [size=8]
>         Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [40] Power Management version 2
> 
> 00:09.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>         Subsystem: Unknown device 6159:0001
>         Flags: bus master, medium devsel, latency 64, IRQ 5
>         I/O ports at d400 [size=256]
>         Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [40] Power Management version 2
> 
> 00:0a.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>         Subsystem: Unknown device 6159:0001
>         Flags: bus master, medium devsel, latency 64, IRQ 12
>         I/O ports at d000 [size=256]
>         Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [40] Power Management version 2
> 
> 01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2
> Pro] (rev 11) (prog-if 00 [VGA])
>         Subsystem: Diamond Multimedia Systems Viper V770 Ultra
>         Flags: bus master, 66Mhz, medium devsel, latency 64
>         Memory at de000000 (32-bit, non-prefetchable) [size=16M]
>         Memory at da000000 (32-bit, prefetchable) [size=32M]
>         Expansion ROM at dfef0000 [disabled] [size=64K]
>         Capabilities: [60] Power Management version 1
>         Capabilities: [44] AGP version 2.0

Remco Barende

2006-Apr-04 11:34 UTC

head link

[Asterisk-Users] Fax over 2 bridged TE110P channels

I suspect that in your case the fax channels are not natively bridged. I'm 
not sure whether native bridging will work if you are using 2 cards.  It 
should work if the ports are on one card i.e. TE205P or TE210P in which 
case there will be no intervention of Asterisk at all.

You might want to check with Digium support to verify

Let me know the result.

Cheers!
Remco


On Tue, 4 Apr 2006, Alessio Focardi wrote:
> Hi,
>
> I have an asterisk installation with 2 E1 cards
>
> Software version is
>
> Asterisk 1.2.6
> Libpri 1.2.2
> Zaptel 1.2.5
>
> I'm having problem with fax transmission, let me explain better my
> setup:
>
>
> My fist TE110P E1 card is connected to the telco line
> the second TE110P E1 one to an Nexspan PBX
>
> so the server is basically sitting between the line, and the pbx.
>
> every call coming from the line is simply redialed in the pbx
> every call from pbx is simply redialed to the line
> no answer is done
>
> All is working great with voice, but faxing often results in error, both
> receiving and sending.
>
> I have disabled echo cancel, and also checked for interrupts problems
> and other common misconfiguration problems.
>
>
> Would someone please help me sort this out ?
> I'm suspecting sync problems ...
>
> Tnx for any help!
>
>
>
> Following are some debug and config files
>
>
> zaptel.conf
>
>
> loadzone = it
> defaultzone = it
>
>
> span=1,1,0,ccs,hdb3,crc4
>
> bchan=1-15
> dchan=16
> bchan=17-31
>
> span=2,0,0,ccs,hdb3,crc4
>
> bchan=32-46
> dchan=47
> bchan=48-62
>
>
> zapata.conf
>
> [channels]
>
> switchtype = euroisdn
>
>
> ;line
> signalling=pri_cpe
> pridialplan=unknown
> switchtype=euroisdn
> priindication = outofband
> echocancel=no
> overlapdial=yes
> immediate=no
> nationalprefix> internationalprefix> resetinterval=300
> context=pri1
> group=1
> channel => 1-15
> channel => 17-31
>
> ;pbx
> signalling=pri_net
> pridialplan=international
> switchtype=euroisdn
> priindication=outofband
> echocancel=no
> overlapdial=yes
> immediate=no
> nationalprefix> internationalprefix> resetinterval=300
> context=pri2
> group=2
> channel => 32-46
> channel => 48-62
>
> pri1 context
>
> exten=>_X.,1,Dial(Zap/g2/${EXTEN}||j)
> exten=>_X.,2,Congestion()
> exten=>_X.,102,Busy()
>
> pri2 context
>
> exten=>_X.,1,Dial(Zap/g1/${EXTEN}||j)
> exten=>_X.,2,Congestion()
> exten=>_X.,102,Busy()
>
>
> cat /proc/interrupts
>           CPU0
>  0: 1114420235          XT-PIC  timer
>  1:          8          XT-PIC  i8042
>  2:          0          XT-PIC  cascade
>  5: 1114083499          XT-PIC  t1xxp
>  8:          1          XT-PIC  rtc
>  9:          0          XT-PIC  acpi
> 10:    2531734          XT-PIC  eth0
> 12: 1114121836          XT-PIC  t1xxp
> 14:     306435          XT-PIC  ide0
> NMI:          0
>
>
> lspci -v
>
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645 Host &
Memory &
> AGP Controller (rev 01)
>        Flags: bus master, medium devsel, latency 32
>        Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
>        Capabilities: [c0] AGP version 2.0
>
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
> bridge (AGP) (prog-if 00 [Normal decode])
>        Flags: bus master, fast devsel, latency 64
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>        Memory behind bridge: dde00000-dfefffff
>        Prefetchable memory behind bridge: d9c00000-ddcfffff
>
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media
> IO]
>        Flags: bus master, medium devsel, latency 0
>
> 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
>        Flags: medium devsel
>        I/O ports at 0c00 [size=32]
>
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> (prog-if 80 [Master])
>        Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
> (A,B step)
>        Flags: bus master, fast devsel, latency 128
>        I/O ports at ff00 [size=16]
>
> 00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
> Fast Ethernet (rev 90)
>        Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
> Adapter
>        Flags: bus master, medium devsel, latency 64, IRQ 10
>        I/O ports at dc00 [size=256]
>        Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
>        Expansion ROM at dffa0000 [disabled] [size=128K]
>        Capabilities: [40] Power Management version 2
>
> 00:08.0 ISDN controller: Cologne Chip Designs GmbH: Unknown device 16b8
(rev
> 01)
>        Subsystem: Cologne Chip Designs GmbH: Unknown device b562
>        Flags: medium devsel, IRQ 11
>        I/O ports at d800 [size=8]
>        Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [40] Power Management version 2
>
> 00:09.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>        Subsystem: Unknown device 6159:0001
>        Flags: bus master, medium devsel, latency 64, IRQ 5
>        I/O ports at d400 [size=256]
>        Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [40] Power Management version 2
>
> 00:0a.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>        Subsystem: Unknown device 6159:0001
>        Flags: bus master, medium devsel, latency 64, IRQ 12
>        I/O ports at d000 [size=256]
>        Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [40] Power Management version 2
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2
> Pro] (rev 11) (prog-if 00 [VGA])
>        Subsystem: Diamond Multimedia Systems Viper V770 Ultra
>        Flags: bus master, 66Mhz, medium devsel, latency 64
>        Memory at de000000 (32-bit, non-prefetchable) [size=16M]
>        Memory at da000000 (32-bit, prefetchable) [size=32M]
>        Expansion ROM at dfef0000 [disabled] [size=64K]
>        Capabilities: [60] Power Management version 1
>        Capabilities: [44] AGP version 2.0
>

Apparently Analagous Threads

Search for more maybe matching threads

asterisk users - Apr 2006 - Fax over 2 bridged TE110P channels

[Asterisk-Users] Fax over 2 bridged TE110P channels

[Asterisk-Users] Fax over 2 bridged TE110P channels

[Asterisk-Users] Fax over 2 bridged TE110P channels

Apparently Analagous Threads