search for: soundpoint

Hi We've setup an Asterisk PBX recently and I encountered the following problem: When [mac address]-registration.cfg file includes the FQDN of the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even try to) register with the Asterisk PBX unless the DNS (it asks) successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this happen to anyone else? PS - The application version running on the SoundPoint 501s is 1.6.7.0098 TIA Paolo

I just got a Polycom soundpoint and I set it up using the phone and web based admin. I cant seem to figure out the config files and they are confusing me greatly and I dont have time for it :) Some things are odd, like on every reboot it seems the volume I set is reset? is there any way to fix that. And the ringer seems low...

I have an extension setup in my extensions.conf for hold music. ext. 600. If I pick up a phone (polycom soundpoint 300 sip) and dial extension 600 I hear the hold music playing. If I call another extension and pick it up and put the call on hold with the hold button on the phone I hear nothing at all. Does anyone have any experience with these phones and getting the hold button to work?

I've got a couple Shoreline IP phones, their Shoreline model number is Shoreline IP 100. I believe this is actually a Polycom SoundPoint IP 300 phone. I believe the phone is using a MGCP stack. I want to use it for testing with Asterisk. 1. I suspect I need to re-image the phone to make it work with *. 2. How can I preserve the current image on the phone? 3. What is preferred image to use with this phone for *. 4. Where do I get...

Hi Folks; I just bought a Polycom SoundPoint 500 off of ebay after having spent way too much time trying to get updated sip images for our cisco phones. The phone I bought didn't have an AC power adapter; Could someone please tell me the volts & amps that the dc plug that comes with the phone puts out? Thanks! Mike

Hey, all. I'm in the middle of a rollout, and just learned that the SoundPoint IP 430 -- my favorite mid-range phone -- has been discontinued. The heir apparent is the SoundPoint IP 450 -- for a low, low, low $130 more/handset. AND it doesn't look as nice. Ouch. Does anyone have any recommendations -- Polycom or otherwise -- for a good-quality, mid-range, two-line SIP...

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

Dear Group, Does any one have experience using SoundPoint(r) IP 300? I have one call center on Snom 200's I'm adding a second and was looking at the SoundPoint, but needed some input. Thanks Shad Mortazavi --------------------------------------------------- Nexus Technical Manager n|m Nexus Management Inc Sydney -------------- next part -----...

Hello all, I need the bootrom.ld file to set up some Polycoms I have Platform: Model=SoundPoint IP 330, Assembly=2345-12200-001 Rev=A I've publiched on my FTP files downloaded from http://support.polycom.com/PolycomService/support/us/support/voice/soundpoint_ip/soundpoint_ip330_320.html (3.2.3 combined and split zips) but my phones are still showing the message: "error, application...

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

I'm attempting to set up my SoundPoint 501 with my Asterisk server. I've configured DHCP and TFTP and successfully updated both the BootRom and SIP application. I've also created a custom cfg file for this phone's MAC address and the settings seem to be taking just fine. I can see that the phone registers with my Asterisk se...

...hones that I can hang on the wall. I need the phones to use PoE. Do the Uniden phones support wall-mounting? These phones are not going to be high-usage; they simply need to be there in case of an emergency. Another question, along the same kind of lines, has anyone figured out how to keep the SoundPoint IP 600 receiver on-hook? Mine keeps being pushed up by the little piece of plastic that is supposed to detect if it's on-hook. It looks like the handset already has the little hole for the hook, but I didn't find said hook in the package. Has anyone else had this problem/found a solution...

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goe...

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

...place. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of David Gomillion Sent: Friday, September 03, 2004 5:41 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Wall-mounting UIP 200 and SoundPoint IP600 keepscoming off hook I am looking for a large number (probably about 100 or so) low-cost phones that I can hang on the wall. I need the phones to use PoE. Do the Uniden phones support wall-mounting? These phones are not going to be high-usage; they simply need to be there in case of a...

I bought a couple Polycom Soundpoint 300's, and have them working nicely with SIP... but I'd like to be able to do automatic config via FTP, but it requires some XML config files. The docs discuss them in detail, but I can't seem to d/l them from Polycom. [No, it doesn't appear to be on the CD that comes with the pho...

Hello everyone, I have just received 3 brand new Polycom SoundPoint IP 600 from "voipsupply.com" and I have the exact same problem on all of them. When I receive a call, the phone is ringing correctly but when I answer it, it takes exactly 10 seconds before I can hear the caller. I also have SoundPoint 300 and 301 and I don't have that problem with th...

I am trying to use a Polycom Soundpoint IP400 with my asterisk setup, and have been unable to find the proper firmware and application files to make it work. The phone can access the FTP server, and downloads the IP500/600 configuration files, but claims that the sip.ld file is larger than its file system. I can think of two possi...

Hello, I'm having issues with my phone Polycom sp450 not subscribing to Asterisk server. Asterisk server is fine, firewall is not the issue because a secondary phone is working fine, my connection to the server is fine too, any ideas or suggestions are welcome. -Motty -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone have the Admin password for the phone in order to change configuration Roman