search for: reflashed

Hello Sa?o! I found you here: http://mail.opensolaris.org/pipermail/zfs-discuss/2012-May/051546.html "How about reflashing LSI firmware to the card? I read on Dell''s spec sheets that the card runs an LSISAS2008 chip, so chances are that standard LSI firmware will work on it. I can send you all the required bits to do the reflash, if you like." I got Dell Perc H310 controller

...You may have to fiddle with the firmware to get it to stop trying to do clever RAID stuff, which lets you do smart RAID stuff like ZFS instead. I?m sure you can reflash LSI card to make it SATA or SAS HBA, or MegaRAD hardware RAID adapter. Is far as I recollect it is the same electronics board. I reflashed a couple of HBAs to make them MegaRAID boards. One thing though bothers me about LSI, now after last it was bought by Intel its future faith worries me. Intel pushed 3ware which it acquired in the same package with LSI already into oblivion? Valeri >> What has HP been thinking? > >...

Have some 5220's that are MiNet only and I was wondering if anyone has ever reflashed it to MiNet/SIP. Tried to fake out the phone by redirecting it to a TFTP server with the SIP image, it loads it, freaks out, and reboots. tia

Hi, I have been trying to boot a PC based terminal using your PXELINUX project and I am having a problem. The Terminal (a Netier NetXpress XL2000) has a m-systems Disk-On-Chip 2000 flash memory module which is normally used to boot a cut-down version of WinNT. I work in a repair department where we often have to open up these terminals and temporarily install a hard-drive to reflash the

Howdy, I know that syslinux doesn't currently support this, but does anyone here know how I might go about getting some sort of boot process together that would have a single firmware image as opposed to seperate files for initrd, kernel, and root fs? Thanks.

...:36:24: > > > > I will get a packet sniffer on one in a minute.... > > Don't bother, won't work. I already tried. Spoke to some Mitel mucky-mucks > too, and they said nope. You have to get Mitel's SIP-specific phone which *is* > a 5220 that's been reflashed. Unfortunately, I have 80 5020's which can't be > reflashed to SIP. > > Of course, I would be *very very* interested if you magically got it to work. > Different eyes, and all that... > > > [attachment "ATT17674.txt" deleted by Samuel Luxford-Watts/...

On Wed, Nov 11, 2020 at 5:47 PM Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > I?m sure you can reflash LSI card to make it SATA or SAS HBA, or MegaRAD > hardware RAID adapter. Is far as I recollect it is the same electronics > board. I reflashed a couple of HBAs to make them MegaRAID boards. > you can reflash SOME megaraid cards to put them in IT 'hba' mode, but not others. > > One thing though bothers me about LSI, now after last it was bought by > Intel its future faith worries me. Intel pushed 3ware which it acqui...

John Todd wrote.... > For those of you wanting to salvage your Cisco ATA-186 after > inadvertent locking, or after recovering your devices from a vendor > who has locked them, here is a rainy-day project for you: > somedoc.pdf..... Immediately strides to ATA, rips off cover... woohoo, EEPROM is socketed.... well maybe I'll just copy the contents of a working ATA into the

Hello list- I'm having an extremely odd issue with an installation of mine. The system is running * 1.2.12.1 and currently handles around 100 handsets. With the exception of a few Grandstream DTA's, all devices are Polycom 320, 430, or 601's. After a recent power outage, I'm having an extremely odd issue with one of the handsets. One of the Polycom 601 units simply reboots every

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner

Hi: I use this driver to set up my Fedora Core 1 as a PXE server. After I successfully boot up from network in my laptop, it erases my Intel PXE boot manager from my laptop's BIOS. The BIOS of my laptop has an option to choose form "boot from ethernet", but it is gone after I use this driver. Now I have to reflash my laptop's BIOS and Intel PXE boot manager ROM to make it come

So, I recently acquired an old DVG-1120M that was previously used with AT&T CallVantage service. It currently uses MGCP. I see online that there is a SIP version out there (DVG-1120S), which is essentially a DVG-1120M reflashed with the SIP firmware and the 'M' scraped off in favor of an 'S'. I've also seen people on this list saying that they flashed their M with S firmware and have it working with Asterisk. So, now, I pose the following questions to the list: * Where in $DEITY's name is there f...

HI all, I wonder how rsync works when files-to-be-updated are in flash (e.g. on IPAQ) Ideally rsync should write to the flash as little as possible (because of max reflash count) SO ideally the following should happen If file needs to be updated, the new file is created. Then the old file is deleted the new file is renamed to the old file (making sure that the file does not get copied over)

Hey, all. Got an SNOM 820 in the other day to kick the tires. As with many phones, provisioning it was a bit of a PITA. The biggest problem, as far as I could tell, was that their firmware just doesn't seem that stable, and is sometimes hard to get to. - I managed to corrupt the firmware twice; fortunately, instead of bricking the phone, there's a fairly easy-to-use "rescue

Does anyone know if this phone can or does work with Asterisk ? I have a potential client who wants to throw away their current mitel ip system (keeps crashing on a regular basis - not good for a phone-based company), but are reluctant to purchase new handsets. Thanks. Julian.

...SWD_) > to the proper values for your environment. > > > > Once you've got your tftp server setup properly with > all of the appropriate config files, plug your phone in and > follow the instructions at the bottom part of my blog post > that explain how to get the phone reflashed to the SIP image > and registered to your asterisk server. > > > > > > -- > > Thanks, > > --Warren Selby, dCAP > > http://www.SelbyTech.com

Hi, folks, Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS (rev 08). It *appears* that a) trying MegaRaid, and b) from what I'm googling, that what I need are mptfusion-related packages. Unfortunately, yum shows me nothing available in base, epel, or rpmfusion. Am I looking for the wrong thing, or does anyone have a source (no, I haven't looked at LSI, sorry

On Wed, 2020-11-11 at 11:34 +0100, Thomas Bendler wrote: > Am Mi., 11. Nov. 2020 um 07:28 Uhr schrieb hw <hw at gc-24.de>: > > > [...] > > With this experience, these controllers are now deprecated. RAID > > controllers > > that can't rebuild an array after a disk has failed and has been replaced > > are virtually useless. > > [...] > >

Hi, John, John R Pierce wrote: > On 7/12/2016 10:19 AM, m.roth at 5-cent.us wrote: >> Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS >> (rev 08). It*appears* that a) trying MegaRaid, and b) from what I'm >> googling, that what I need are mptfusion-related packages. >> Unfortunately, yum shows me nothing available in base, epel, or >>

...rder of /dev/sdX devices? (Phil Schaffner) CentOS 5.4(final) 2.6.18-164el5PAE. I am trying to prevent removable USB and eSATA devices from occupying /dev/sdX devices ahead of a 3ware RAID controller. For example: at boot, if a USB drive and eSATA HDD (connected to an LSI 1068E onboard controller, reflashed in "IT" mode to handle hotplug devices) were both present, they would occupy devices /dev/sdb and /dev/sdc, ahead of the RAID controller which ends up as /dev/sdd. As these are removable devices, they should normally get handled by custom udev script looking for adds matching KERNEL==&qu...