Displaying 20 results from an estimated 21 matches for "linecode".
Did you mean:
libencode
2008 Mar 04
4
Mitel SX-200 + *
Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system
to work with *?
I'm not getting inbound or outbound calls to work. (Inbound caller gets
line busy tone.)
SETTINGS FROM MITEL:
I built a Crossover cable and connected it like this:
PSTN--T1--ASTRISK--T1--OLD MITEL
-Crossover Cable Pin-out:
1 - 4
2 - 5
2005 Jan 04
0
Cisco 7200 One-Way Audio
...e password 7 XXXXXXXXXXXXXXXXX
!
clock timezone GMT 0
dspint DSPfarm1/0
!
ip subnet-zero
no ip routing
!
!
ip name-server XXX.XXX.XXX.XXX
!
no ip cef
isdn switch-type primary-ni
call rsvp-sync
voice call send-alert
voice rtp send-recv
!
voice service voip
!
!
!
!
!
!
controller T1 1/0
framing esf
linecode b8zs
cablelength long 0db
pri-group timeslots 1-24
!
controller T1 1/1
framing esf
linecode b8zs
cablelength long 0db
pri-group timeslots 1-24
!
controller T1 2/0
framing esf
service-type ccs-voice
linecode b8zs
cablelength long 0db
pri-group timeslots 1-24
!
controller T1 2/1
framing e...
2004 Nov 29
1
Cisco gateway help needed
...192.168.5.104
boot-end-marker
network-clock base-rate 56k
no aaa new-model
ip subnet-zero
!
voice class codec 10
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 4 g729r8
codec preference 6 g729ar8
!
!
no voice confirmation-tone
!
controller T1 0
mode cas
framing esf
linecode b8zs
ds0-group 1 timeslots 1-4 type e&m-wink-start
fdl both
!
controller T1 1
mode cas
framing esf
linecode b8zs
ds0-group 1 timeslots 1-4 type e&m-wink-start
!
!
!
interface Tunnel1
no ip address
!
interface Ethernet0
ip address xx.xx.xx.xx 255.255.255.248
!
interface Serial0
no i...
2004 Oct 06
2
Cisco router for PRI termination?
If you have a PRI terminated in a Cisco router talking SIP to * and would
be willing to share your Cisco config, please respond. Also, I would be
interested in knowing what version of IOS you are using. We are using an
NM-HDV in a 3640.
TIA
Bruce Komito
High Sierra Networks, Inc.
www.servers-r-us.com
(775) 236-5815
2005 Oct 02
1
Adit 600 FXO card sound quality
...stem Group objects.
set snmp getcom "public"
set snmp setcom "public"
set snmp trapcom "public"
set snmp trapauth enable
set snmp trapevent all
-Setting slot a.
set a:1 up
set a:1 fdl none
set a:1 lbo 1
set a:1 framing esf
set a:1 id "toasterisk"
set a:1 linecode b8zs
set a:1 loopdetect csu
set a:1:1-24 side drop
set a:1:1-24 type voice
set a:1:1-24 signal ls
set a:2 down
set a:2 fdl none
set a:2 lbo 1
set a:2 framing esf
set a:2 id "CAC DS1# A:2"
set a:2 linecode b8zs
set a:2 loopdetect csu
set a:2:1-24 side drop
set a:2:1-24 type voice
set a:2:1...
2003 Apr 30
5
PRI Setup
...config info for PRI's, can someone point me to
PRI config info, or let me know what changes I need to make in order to
bring them up, I imagine, zapata.conf and zaptel.conf will require some
changes to bring the PRI up. The PRI is currently hooked up to my cisco
controller T1 1/0
framing esf
linecode b8zs
cablelength short 110
pri-group timeslots 1-24
interface Serial1/0:23
no ip address
no logging event link-status
isdn switch-type primary-5ess
isdn incoming-voice voice
no cdp enable
Regards
MIKE
2004 Jul 31
0
Trunk doesn't work Adit 600/T100P
...0
-Setting the SNMP MIB-II System Group objects.
set snmp getcom "public"
set snmp setcom "public"
set snmp trapcom "public"
-Setting slot a.
set a:1 up
set a:1 fdl none
set a:1 lbo 1
set a:1 framing esf
set a:1 id "CAC DS1# 01"
set a:1 linecode b8zs
set a:1 loopdetect on
set a:1 threshold min15 uas default
set a:1 threshold min15 ses default
set a:1 threshold min15 es default
set a:1 threshold min15 sefs default
set a:1 threshold min15 les default
set a:1 threshold min15 css default
set a:1 threshold min15 bes default
set a:1 thr...
2004 Jan 17
1
Channel Bank Woes...
...set snmp getcom "public"
set snmp setcom "public"
set snmp trapcom "public"
set snmp trapauth enable
set snmp trapevent all
set snmp trapvers 2
-Setting slot a.
set a:1 up
set a:1 fdl none
set a:1 lbo 1
set a:1 framing esf
set a:1 id "CAC DS1# A:1"
set a:1 linecode b8zs
set a:1 loopdetect on
set a:1:1-24 side drop
set a:1:1-24 type voice
set a:1:1-24 signal ls
set a:2 down
set a:2 fdl none
set a:2 lbo 1
set a:2 framing esf
set a:2 id "CAC DS1# A:2"
set a:2 linecode b8zs
set a:2 loopdetect on
set a:2:1-24 side drop
set a:2:1-24 type voice
set a:2:1-2...
2005 Mar 19
3
Asterisk and Cisco AS53xx/54xx Access Server Platform
...[...]
spe country t1-default
isdn switch-type primary-ni
!
voice hunt user-busy
voice call send-alert
voice call convert-discpi-to-prog
voice rtp send-recv
voice service voip
fax protocol pass-through g711alaw
h323
sip
bind all source-interface FastEthernet0/0
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24
interface Serial3/0:23
description T1 to CLEC
no ip address
load-interval 30
isdn switch-type primary-ni
isdn incoming-voice modem
no cdp enable
voice-port 3/0:D
bearer-cap Speech
dial-peer voice 1 pots
incoming called-number 21255512[00-50]
direct-inward-dia...
2005 Oct 03
2
asterisk, cisco 3640's and DIDs...
...ected to a cisco 3640 (in my day "cisco" is
all lower case :-)). My config looks something like this on the cisco...
---------------------------------------------------------
voice-card 3
dsp services dspfarm
!
ip cef
!
isdn switch-type primary-5ess
!
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24
description RCN PRI at SF7
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
!
interface Serial3/0:23
no ip address
dialer-group 1
isdn switch-type primary-5ess
isdn incoming-voice voice
no cdp enable
!
voice-port 3/0:23
connection...
2008 Jul 25
0
Slightly Off Topic: Cisco & Premisys Slimline
...port connects immediately without ringing the attached
phone. If I pick up the phone, it's connected and I can talk to the
caller. Hanging up has no effect. I can see the bit transitions (0101
to 1111 when I go off hook), but no dial tone. My config is:
controller T1 7/1
framing esf
linecode b8zs
cablelength short 133
ds0-group 0 timeslots 1 type fxs-loop-start
ds0-group 1 timeslots 2 type fxs-loop-start
ds0-group 2 timeslots 3 type fxs-loop-start
ds0-group 3 timeslots 4 type fxs-loop-start
ds0-group 4 timeslots 5 type fxs-loop-start
ds0-group 5 timeslots 6 type fxs-loop-...
2003 Dec 03
2
Cisco IAD with MGCP
...er capacity active
!
voice service pots
!
voice service voip
!
voice class codec 10
codec preference 1 gsmfr
codec preference 2 g711alaw
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
controller T1 1/0
shutdown
framing esf
linecode b8zs
!
!
!
interface FastEthernet0/0
ip address 192.168.65.200 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.65.1
!
!
!
dialer-list 1 protocol ip permit
!
!
call rs...
2006 Apr 12
1
ASterisk Back2back
...0,ccs,hdb3,crc4,yellow
span=3,0,0,ccs,hdb3,crc4,yellow
span=4,0,0,ccs,hdb3,crc4,yellow
current i have problem error message in cisco as5300 after make a call, if used debug isdn q931
in cisco AS5300 config :
isdn siwtch-type primary-net5
controller e1 0
framming crc4
linecode hdb3
pri-group 1-31
interface serial0:15
isdn switch-type primary-net5
isdn incomming-voice modem
isdn T310 60000
dialpeer,.....blah,...blahh
thanks for ur help
Dirgan
Send instant messages to your online friends http://asia.messenger.yahoo.com
----...
2005 Oct 13
2
Sample cisco config for cisco 7206
I see a lot of comments but no actual show runs.
Can someone post a 7206 config.
I am having a dickens of a time getting calls to pass.
I currently have the following loaded.
Cisco IOS Software, 7200 Software (C7200-IK9O3S-M), Version 12.3(8)T6,
RELEASE SOFTWARE (fc2)
Thanks !!!
Jerry
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 /
2005 May 19
0
Re: Asterisk-Users Digest, Vol 10, Issue 154
...e CST -6
clock summer-time CDT recurring
!
no aaa new-model
ip subnet-zero
no ip routing
ip finger
ip domain name shsu.edu
ip name-server 158.135.1.20
ip name-server 158.135.1.200
!
!
isdn switch-type primary-5ess
isdn voice-call-failure 0
!
!
!
!
!
!
!
!
!
!
!
!
controller T1 0
shutdown
framing sf
linecode ami
!
controller T1 1
shutdown
framing sf
linecode ami
!
controller T1 2
framing esf
clock source line primary
linecode b8zs
pri-group timeslots 1-24
!
controller T1 3
shutdown
framing sf
linecode ami
!
!
interface Ethernet0
no ip address
no ip route-cache
shutdown
!
interface Serial2:23
no ip addr...
2009 Oct 15
2
Asterisk with a Cisco AS5300 gateway
Hi
i test a new equipment on my backbone: a Cisco AS5300 with voice dsp
ressource
connected at a E1 Voice Link.
I want that all call incoming on the cisco 5300 are sent to Asterisk and
all Asterisk outgoing
call are sent to Cisco AS5300.
Actually, i configure the AS5300:
isdn switch-type primary-net5
!
voice service voip
sip
!
voice class codec 400
codec preference 1 g711alaw
codec
2004 Jun 28
2
Adit 600 - Getting Dial Tone
Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my
asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the
command line. The slots (3 fxs) are configured with 'ls' signaling. I
configured the T1 card with the same line settings as the T1 interfaces on
the adit and I get green lights on both the T1 card and the T1 interface on
the adit (so
2007 Aug 01
3
TE120P in Canada
Hi All,
I'm having problems trying to get a TE120P operational in Canada.
I keep getting a congestion error when I try to make a call. I'm not
sure if my switching, parity, etc is correct. I'm hoping that someone
will be able to verify my config.
The Telco is SaskTel, with a 10 channel 50 DDI service.
Zap show channels show and ztcfg -vv looks ok and the zttool show
2006 Jun 12
0
ICLID or CNAM calling name and number through a cisco isdn gateway
...g711ulaw
codec preference 2 g711alaw
codec preference 3 g723ar53
codec preference 4 g723ar63
codec preference 5 g723r53
codec preference 6 g728
codec preference 7 g729r8
!
!
!
!
!
!
!
!
!
username nvxcpe privilege 15 secret 5 $1$oAvO$zHweQ8lbhZjzROdYw4psM/
!
!
controller T1 1/0
framing esf
linecode b8zs
cablelength short 133
pri-group timeslots 1-8,24
description WAN
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0
no ip address
encapsulation frame-relay IETF
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-24
frame...
2005 Sep 13
1
Cisco AS5400 Configuration as a SIP Peer - URGENT
List users,
It's been a while since I've posted here, but I've been hard at work
pushing toward our large scale Asterisk goal and keeping up with this
list can be a full time job by itself (I have19,543 unread list messages!!).
This Friday, September 16th 2005, my team will be at the MCI Development
Lab in Richardson, Texas testing our setup. We have a three server
system