search for: fxs_ls

...ct? /etc/zaptel.conf fxsks=1 fxoks=2 fxoks=3 loadzone=us defaultzone=us /etc/asterisk/zapata.conf [channels] ; language=en ; ;X100P Port 1 context=inbound-analog signalling=fxs_ks usecallerid=yes echocancel=yes echocancelwhenbridged=yes channel => 1 ; ; FXS Port 1 context=local signalling=fxs_ls usecallerid=yes echocancel=yes echocancelwhenbridged=yes ; ;FXS Port 2 context=local signalling=fxs_ls usecallerid=yes echocancel=yes echocancelwhenbridged=yes /etc/asterisk/extensions.conf [local] exten => 2203,1,SetMusicOnHold,loud exten => 2203,2,Dial(Zap/2,15,Ttr) exten => 2203,102...

...is the relevant snippets of the extensions.conf, sip.conf, and Zapata.conf. extensions.conf [sales1] exten => s,1,Dial(SIP/500) exten => _9.,1,Dial(Zap/g1/${EXTEN}:1) [sales2] exten => s,1,Dial(SIP/600) exten => _9.,1,Dial(Zap/g2/${EXTEN}:1) zapata.conf context=sales1 signalling=fxs_ls channel => 1 group = 1 context=sales2 signalling=fxs_ls channel => 2 group = 2 sip.conf [500] type=friend username=500 secret=500 qualify=200 ;nat=yes host=dynamic canreinvite=no callerid="Mike M" <500> context=sales1 [600] t...

...ox running *@Home 1.0 and I noticed today when I went to change some settings to do with the DID's that it is no longer detecting the different lines. I have a Digium 4 port line card and Im pretty sure that the DID's used to work when I used fxs_ks signaling on them. However I changed to fxs_ls signaling because the ks wasn't detecting when people were hanging up properly. Could changing the signaling be whats causing the DIDs not to function properly? My other problem is getting sendmail to work. I get the following error. ----- Transcript of session follows ----- ... while...

...rks fine when dialing out. When in GA dialout is getting "you must first dial a 1 to place this call". show channels tels me the 1 is present in the dial. Or the other situation is it just rings and rings and rings.... I have changed the zapata and zaptel files from fxs_ks to fxs_gs and fxs_ls thinking something is differnet in GA. However nothing seems to affect the calling out. Calls coming in seems to be ok. Any ideas on something to try? Thanks, Jerry

...llows :- X100P clone card /etc/dahdi/system.conf # Span 1: WCFXO/0 "Generic Clone Board 1" (MASTER) fxsks=1 echocanceller=mg2,1 /etc/asterisk/dahdi-channels.conf ; Span 1: WCFXO/0 "Generic Clone Board 1" (MASTER) ;;; line="1 WCFXO/0/0 FXSKS (SWEC: MG2)" signalling=fxs_ls callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default /etc/asterisk/chan_dahdi.conf [trunkgroups] [channels] language = my ; usecallerid = yes callwaiting = yes usecallingpres = yes callwaitingcallerid = yes threewaycalling = yes transfer = yes canpar...

...aycalling=yes transfer=yes cancallforward=yes callreturn=yes ; echocancel=yes ; echotraining=yes echotraining=800 ; rxgain=3.0 txgain=3.0 ; group=1 ; callgroup=1 pickupgroup=1 ; immediate=no ; switchtype = 5ess signalling = pri_cpe group = 2 channel => 1-23 channel => 25-47 signalling = fxs_ls context= internal group = 3 channel => 49-50

...idecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echotraining=yes ;echocancelwhenbridged=yes rxgain=-1.0 txgain=0.0 busydetect=yes callprogress=no accountcode=Telmex amaflags=default signalling=fxs_ls group=1 faxdetect=none callerid=asreceived channel => 1-6 -- Telecomunicaciones Abiertas de Mexico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: applicatio...

...llerid = yes hidecallerid = no echocancel = yes echocancelwhenbridged = yes ;immediate = no txgain=1.0 rxgain=1.0 callprogress=no busydetect=no group = 2 ;use with FXO PCI card signalling = fxo_ls ;channel => 13-24 channel => 1 context = local group = 1 ;use with FXS USB card signalling = fxs_ls ;callerid = "John Doe" <(710) 555-6200> channel => 13 -- Jonathan Moore Director of Technology Winfield Public Schools Office 620.221.5100 Fax 620.221.0508 Visit Winfield Public Schools at http://usd465.com ------------------------------------------------- This mail sent t...

...general? I'm running Asterisk 1.0.2-2 on Debain Linux (with zaptel 1.0.0-2) and i've got the modem connected to an NTL phone line in the UK. Here is my config's: /etc/zaptel.conf: fxsls=1 loadzone=uk defaultzone=uk /etc/zapata.conf: [channels] context=incoming_pstn signalling=fxs_ls usecallerid=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=0.0 txgain=0.0 channel => 1 ztcfg -vvv: Zaptel Configuration ====================== Channel map: Channel 01: FXS Loopstart (Default) (Slaves: 01) 1 channels configured. Any advice would be grea...

...dahdi-channels.conf : context=pstn-channels signalling=fxs_ks channel=>130 context=phone-channels signalling=fxo_ks channel=>127 chan_dahdi.conf : [channels] cidsignalling=dtmf cidstart=dtmf signalling=fxo_ls pulsedial=no usecallerid=yes context=pstn-channels channel=>130 signalling=fxs_ls context=phone-channels channel=>127 extensions.conf : [pstn-channels] exten=>_.,1,Dial(DAHDI/127/${EXTEN}) [phone-channels] exten=>_.,1,Dial(DAHDI/130/${EXTEN}) /dahdi/system.conf fxoks=125-128 fxsks=129-132 I can hear the dial tone from the phone with these configurations. As soon as...

...ext Language MusicOnHold pseudo pstnin default 1 pstnin default 2 pstnin default r2d2*CLI> my /etc/asterisk/zapata.conf [channels] context=default switchtype=national signalling=fxs_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=1.0 txgain=7.0 group=1 callgroup=1 pickupgroup=1...

...600 with 24 FXS ports. I have installed sucessfuly T100P card. Adtran is connected to t100p with crossover T1 cable. On T100P card I have a green light and on Adtran I do not get any errors or alarms. But I do not get dialtone on FXS ports. Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran. In zaptel.conf: span=1,1,0,esf,b8zs fxoks=1-24 loadzone = us defaultzone=us In zapata.conf: [channels] context=demo switchtype=national signalling=fxo_ks group=1 channel=>1-24 rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwait...

Hello, I am trying the setup the TDM01B card. 1 FXO. I connected it to a regular home line. in the /etc/zaptel.conf, I have fxsls=4 In the /etc/asterisk/zapata.conf I have: signaling=fxs_ls language=en group=1 context=default channel => 4 When I start asterisk, I get this error: ERROR[10376]: chan_zap.c:6584 mkintf; Signaling requested on channel 4 is FXO Loopstart but line is in FXS Loopstart Signaling chan_zap.c:9927 setup_zap: Unable to register channel '4' Maybe I ha...

...all between X100P and Zap/4 I need to request Zap/4 for answering the call. I have already searched along the mailing list. It seems to be easy but I don't know how. Zapata.conf: [channels] ;++++++++++++ x100p1 language=es usecallerid=yes echocancel=yes echocancelwhenbridged=yes ;signalling=fxs_ls;<=== loop start ;signalling=fxs_gs;<=== ground start signalling=fxs_ks;<=== kewl start ;immediate=yes context=x100p1 usedistinctiveringdetection=yes callwaitingcallerid=yes callwaiting=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes channel => 1 ;++++++++++ x100...

hi i need help in connecting a X100P-clone in germany. Basic questions: a)what configuration do I need ? what is the difference (maybe explain in german? via email?) fxs_ls: FXS (Loop Start) fxs_gs: FXS (Ground Start) fxs_ks: FXS (Kewl Start) b) can I use one card for connecting to the telephone network (in this case my analog pbx) and the same card for connecting an analog phone (the card has two connectors with "line" and "telephone" sig...

...o avail. I've googled, I've tried loads of configurations, I've rewired phone lines, and still I am not winning the battle. Here's my config. PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS channels, On-Hook messaging disabled, the rest defaults for the channels. In zapata.conf I've tried with both busydetect=>yes and busydetect=>no.... busycount=>6, busycount=>10, callprogress=>yes, callprogress=>no all combinations. The weird thing is, that if I forward the...

Hi, Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo) Steps: modprobe zaptel modprobe wctdm ztcfg -vv /etc/zaptel.conf fxsls=1-4 # TDM04B defaultzone=us loadzone=us /etc/asterisk/zapata.conf signalling=fxs_ls group=1 context=incoming channel => 1-4 modprobe zaptel and wctdm load fine, however ztcfg -vv shows: 0 channels configured Im using centos 4.4 with Asterisk Version 1.2.13 Zaptel Version 1.2.10 Libpri Version 1.2.4 Physically looking at the card, the four FXO ports have the green led turned...

...dules > rc.modules-2.4.33.3 > > ..both files are identical: > > #!/bin/sh > /sbin/modprobe zaptel > /sbin/modprobe zaphfc modes=3 && /sbin/ztcfg -vvvvvv > /sbin/modprobe wctdm24xxp && /sbin/ztcfg -vvvvvv > > ..in zapata.conf I have: > > signalling=fxs_ls > group = 3 > channel => 1-5 > > ..and in zaptel.conf I have: > fxsls=1-24 > > ..now my dobious is about correct steps for remove TDM Card from PC, I > think > that: > > - remove line configuration in zapata.conf and zaptel.conf > - remove in rc.modules and...

...fxsls=25-48 loadzone = us defaultzone=us --- zapata.conf --- [channels] usecallerid=yes hidecallerid=no transfer=yes echocancel=yes echotraining=yes immediate=no ; span 1 (outside T1) context=incoming signalling=fxo_ks channel => 1-24 ; span 2 (internal fxs ports) context=internal signalling=fxs_ls channel => 25-48 --- logger.conf --- [general] [logfiles] verbose_log => verbose messages => notice,warning,error debug => debug all_log => debug,notice,verbose,warning --- extensions.conf --- ; test context for internal analog phones [internal] exten => _X.,1,Playback(demo-tha...

...), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still happened. I thought that there was some remote possibility that the phone company was reversing the line on answering long distance calls, so I switched to fxs_ls instead of fxs_ks - no difference. Various things were tried to no avail, until I made a long distance call over a different carrier to our usual carrier (we use Optus, I made the call over Telstra). When the remote end answered, my end disconnected. What was happening was, when the call is answe...