I'm having a problem with a new installation of asterisk 1.2.5 with a digium dual port T1 (span 1 connected to an outside line, and span 2 connected to a CAC access bank I channel bank with 24 fxs ports). When I start Asterisk (either from safe_asterisk or asterisk -vvvc) it will immediately exit after it initializes. It will start the logger, register applications and functions, register all 48 channels, load all the .so modules, and then exit. The logs complain about not having dundi.conf and iax.conf, but as I will not be using dundi or iax at the moment, I don't see why it should need those particular conf files and not others (like sip.conf and manager.conf). If anyone has experienced a similar problem, or can point me in the correct direction to get rolling, it'd be greatly appreciated. Here's all the log files I'm currently using (all in /etc/asterisk except zaptel.conf): --- zaptel.conf --- span=1,1,0,esf,b8zs span=2,0,0,esf,b8zs fxoks=1-24 fxsls=25-48 loadzone = us defaultzone=us --- zapata.conf --- [channels] usecallerid=yes hidecallerid=no transfer=yes echocancel=yes echotraining=yes immediate=no ; span 1 (outside T1) context=incoming signalling=fxo_ks channel => 1-24 ; span 2 (internal fxs ports) context=internal signalling=fxs_ls channel => 25-48 --- logger.conf --- [general] [logfiles] verbose_log => verbose messages => notice,warning,error debug => debug all_log => debug,notice,verbose,warning --- extensions.conf --- ; test context for internal analog phones [internal] exten => _X.,1,Playback(demo-thanks) ; test context for incoming T1 calls [incoming] exten => _X.,1,Playback(demo-thanks)
On Tue, Jun 06, 2006 at 10:10:17AM -0600, Nathan Bell wrote:> I'm having a problem with a new installation of asterisk 1.2.5 with a > digium dual port T1 (span 1 connected to an outside line, and span 2 > connected to a CAC access bank I channel bank with 24 fxs ports). When I > start Asterisk (either from safe_asterisk or asterisk -vvvc) it will > immediately exit after it initializes. It will start the logger, > register applications and functions, register all 48 channels, load all > the .so modules, and then exit.What exactly is the error message about? Could you attach the logs?> > The logs complain about not having dundi.conf and iax.conf, but as I > will not be using dundi or iax at the moment, I don't see why it should > need those particular conf files and not others (like sip.conf and > manager.conf).I figure that those are warnings.> > If anyone has experienced a similar problem, or can point me in the > correct direction to get rolling, it'd be greatly appreciated. > > Here's all the log files I'm currently using (all in /etc/asterisk > except zaptel.conf): > --- zaptel.conf --- > span=1,1,0,esf,b8zs > span=2,0,0,esf,b8zs > fxoks=1-24 > fxsls=25-48 > loadzone = us > defaultzone=us > > --- zapata.conf --- > [channels] > usecallerid=yes > hidecallerid=no > transfer=yes > echocancel=yes > echotraining=yes > immediate=no > > ; span 1 (outside T1) > context=incoming > signalling=fxo_ks > channel => 1-24 > > ; span 2 (internal fxs ports) > context=internal > signalling=fxs_ls > channel => 25-48 > > --- logger.conf --- > [general] > > [logfiles] > verbose_log => verbose > messages => notice,warning,error > debug => debug > all_log => debug,notice,verbose,warning > > --- extensions.conf --- > ; test context for internal analog phones > [internal] > exten => _X.,1,Playback(demo-thanks) > > ; test context for incoming T1 calls > [incoming] > exten => _X.,1,Playback(demo-thanks) > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > lists.digium.com/mailman/listinfo/asterisk-users >-- Tzafrir Cohen sip:tzafrir@local.xorcom.com icq#16849755 iax:tzafrir@local.xorcom.com +972-50-7952406 tzafrir.cohen@xorcom.com xorcom.com