asterisk users - May 2004 - Problem - Adtran TSU 600, t100p

Hello,

I have just received Adtran TSU 600 with 24 FXS ports.
I have installed sucessfuly T100P card.

Adtran is connected to t100p with crossover T1 cable.
On T100P card I have a green light and on Adtran I do not get any
errors or alarms.
But I do not get dialtone on FXS ports.

Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran.

In zaptel.conf:

span=1,1,0,esf,b8zs
fxoks=1-24
loadzone = us
defaultzone=us

In zapata.conf:

[channels]
context=demo
switchtype=national
signalling=fxo_ks
group=1
channel=>1-24

rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
immediate=no


can somebody help me ? Did I miss something in my config ?
Thank you in advance.
B.

On Tue, 25 May 2004, Bartosz Jozwiak wrote:
>Hello,
>
>I have just received Adtran TSU 600 with 24 FXS ports.
>I have installed sucessfuly T100P card.
Sucessfully?
Did you load the module for the card?
What does 'ztcfg -v' show?
Is asterisk running?  Does asterisk see the ports? (zap show channels)
>Adtran is connected to t100p with crossover T1 cable.
>On T100P card I have a green light and on Adtran I do not get any
>errors or alarms.
>But I do not get dialtone on FXS ports.
>
>Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran.
>
>In zaptel.conf:
<snip>


Good luck,

Steve