asterisk users - Oct 2006 - 0 channels configured with tdm400 (tdm04b rev. G)

Hi,
Some weird problem (or I'm too sleepy) happens with a tdm04B revision G
(4fxo)
Steps:
modprobe zaptel
modprobe wctdm
ztcfg -vv

/etc/zaptel.conf
fxsls=1-4 # TDM04B
defaultzone=us
loadzone=us

/etc/asterisk/zapata.conf
signalling=fxs_ls
group=1
context=incoming
channel => 1-4

modprobe zaptel and wctdm load fine, however ztcfg -vv shows:
0 channels configured

Im using centos 4.4 with
Asterisk Version 1.2.13
Zaptel Version 1.2.10
Libpri Version 1.2.4

Physically looking at the card, the four FXO ports have the green led turned on.
It has no IRQ conflicts and zaptel compiled cleanly.
Kernel is 2.6.9-42ELsmp (it's a dual core Intel machine in an Intel 945G
board)

Your comments are welcomed.

More info.

[root@centos ~]# ztcfg -vvvvvv

Zaptel Configuration
=====================

Channel map:


0 channels configured.

****************************
cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias eth0 e100
alias eth1 3c59x
alias wcfxs wctdm
install wctdm /sbin/modprobe --ignore-install wctdm  && /sbin/ztcfg

***********************
[root@centos ~]# cat /etc/asterisk/zaptel.conf
fxsls=1-4
loadzone=us
defaultzone=us

***********************
[root@centos ~]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

           1 WCTDM/0/0
           2 WCTDM/0/1
           3 WCTDM/0/2
           4 WCTDM/0/3
[root@centos ~]#


On 10/27/06, Erick Perez <eaperezh@gmail.com>
wrote:
> Hi,
> Some weird problem (or I'm too sleepy) happens with a tdm04B revision G
(4fxo)
> Steps:
> modprobe zaptel
> modprobe wctdm
> ztcfg -vv
>
> /etc/zaptel.conf
> fxsls=1-4 # TDM04B
> defaultzone=us
> loadzone=us
>
> /etc/asterisk/zapata.conf
> signalling=fxs_ls
> group=1
> context=incoming
> channel => 1-4
>
> modprobe zaptel and wctdm load fine, however ztcfg -vv shows:
> 0 channels configured
>
> Im using centos 4.4 with
> Asterisk Version 1.2.13
> Zaptel Version 1.2.10
> Libpri Version 1.2.4
>
> Physically looking at the card, the four FXO ports have the green led
turned on.
> It has no IRQ conflicts and zaptel compiled cleanly.
> Kernel is 2.6.9-42ELsmp (it's a dual core Intel machine in an Intel
945G board)
>
> Your comments are welcomed.
>

-- 
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------

On Sat, Oct 28, 2006 at 09:24:52AM -0500, Erick Perez
wrote:
> More info.
> 
> [root@centos ~]# ztcfg -vvvvvv
> 
> Zaptel Configuration
> =====================> 
> 
> Channel map:
> 
> 
ztcfg has heard of no channels, and hence did not try to configure them.
Why is that?
> 0 channels configured.
> 
> ****************************
> cat /etc/modprobe.conf
> alias scsi_hostadapter ahci
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
> alias eth0 e100
> alias eth1 3c59x
> alias wcfxs wctdm
> install wctdm /sbin/modprobe --ignore-install wctdm  && /sbin/ztcfg
> 
> ***********************
> [root@centos ~]# cat /etc/asterisk/zaptel.conf
... Because ztcfg looks for /etc/zaptel.conf and not for
/etc/asterisk/zaptel.conf .
> fxsls=1-4
> loadzone=us
> defaultzone=us
> 
> ***********************
> [root@centos ~]# cat /proc/zaptel/1
> Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> 
>           1 WCTDM/0/0
>           2 WCTDM/0/1
>           3 WCTDM/0/2
>           4 WCTDM/0/3
> [root@centos ~]#
> 
-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir