search for: defaultzon

...d line. This problems makes it unlikely that asterisk will start properly if the system is rebooted. Is there something I can do to ensure the modules get loaded in the correct order? Here's my config files, if they will help... # cat /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us span=2,1,0,esf,b8zs bchan=25-47 dchan=48 defaultzone=us loadzone=us fxoks=49-52 defaultzone=us loadzone=us # cat /etc/asterisk/zapata.conf [channels] language=en switchtype=national context=incoming faxdetect=none signalling=pri_cpe group=1 echocancel=yes resetinterval=never chan...

Hi, Is anyone successfully using Asterisk in India hooked up to the PSTN? I have tried "defaultzone=us" and no tones would work at all when calling the IVR, but if i set "defaultzone=uk" most but not all of the buttons work. Does anyone have any tips or tricks for getting TDM / PSTN connectivity from asterisk in India? Tia, Matt

...3 I/O ports at e400 [size=256] Memory at febfe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 The problem is that I cant make the both cards to work together in the same server. Here is my /etc/zaptel.conf: ### fxsks=1-4 loadzone = us defaultzone=us span=1,1,0,ccs,hdb3,crc4 bchan=5-19,21-35 dchan=20 ### When I load the wctdm module, I get this error: ZT_CHANCONFIG failed on channel 5: No such device or address (6). Its sounds like the FXS module its tring to configure the channels 5 to 35 (E1 - ISDN Channels - TE110P card). Anybody alre...

...configuration. My E100P only shows some YELLOW / RED alarm when I load the wct1xxp module and do a cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED ... .. . My /etc/zaptel.conf is: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nl defaultzone=nl I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a configuration problem. Can anyone give me a hint how to configure my E100P? Thank you for your help, Jan Goericke

no matter which way I have my /etc/zaptel.cfg this only started happening after a yesterdays CVS update to my zaptel source... Line 1: fxoks=1 Line 2: fxsks=2 Line 23: loadzone=us Line 28: defaultzone=us <End of File> Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels configured. ZT_CHANCONFIG failed on channel 2: Invalid argument (22) Did you forget that FXS interfaces...

Hello all. I am trying to get my second x100p card set up and am having some troubles. My zaptel.conf reads: fxsks=1-2 fxoks=3-4 defaultzone=us loadzone=us before adding this card my zaptel.conf read: fxsks=1 fxoks=2-3 defaultzone=us loadzone=us But now that I've made the change I am getting the following error when running modprobe wcfxo and of course the same error if I use /sbin/ztcfg The error reads: ZT_...

...the Brazil. I have a problem on Unicall for Asterisk 1.4. I am working with E1 with 30 channels. Message when it receives calls: chan_unicall.c:2603 handle_uc_event:unicall/1 protocol error.cause 32772. My files: /etc/zaptel.conf: span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 loadzone = br defaultzone = br fxoks = 32-55 /etc/asterisk/unicall.conf: [Channels] language=br context=default usecallerid=yes hidecallerid=no callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 relaxdtmf=no rxgain=0 txgain=0...

Hi, Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo) Steps: modprobe zaptel modprobe wctdm ztcfg -vv /etc/zaptel.conf fxsls=1-4 # TDM04B defaultzone=us loadzone=us /etc/asterisk/zapata.conf signalling=fxs_ls group=1 context=incoming channel => 1-4 modprobe zaptel and wctdm load fine, however ztcfg -vv shows: 0 channels configured Im using centos 4.4 with Asterisk Version 1.2.13 Zaptel Version 1.2.10 Libpri Version 1.2.4 Physically looki...

I installed asterisk on Fedora Core 2 kernel 2.6.5. I followed the standard procedure. zaptel-libpri-asterisk. The thing is that I constantly get the error message: line 4: Unable to open master device '/dev/zap/ctl' where the file zaptel.conf contains only 4 files: fxoks=1 fxsks=4 defaultzone=us loadzone=us I cant run asterisk and get a load of error messages. When I tried to check the directory /dev/zap, it wasnt there. It isnt created during installation. Can someone help me out. Apart from that, should I get a dialtone in the fxs module when the tdm400p is connected in the compu...

...lt) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: D-channel (Default) (Slaves: 07) 7 channels configured. ZT_SPANCONFIG failed on span 1: Invalid argument (22) ------------------------------------------------------------- cat /etc/zaptel.conf loadzone=nl defaultzone=nl fxsks=1 ######################## loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=2-3,5-6 dchan=4,7 and # cat /etc/asterisk/zapata.conf [channels] switchtype = euroisdn ; p2p TE mode signalling = bri_cpe ; prilocaldialplan=national pridialplan = unknown ; echocancel=yes group = 1 con...

...dahdi_echocan_oslec: Unknown symbol oslec_free Mar 3 11:06:37 server1 modprobe: FATAL: Error inserting dahdi_echocan_oslec (/lib/modules/2.6.18-92.1.22.el5/dahdi/dahdi_echocan_oslec.ko): Unknown symbol in module, or unknown parameter (see dmesg) # cat /etc/dahdi/system.conf loadzone = in defaultzone = in span=1,1,7,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 echocanceller=oslec,1-15,17-31 Is there anything missing or i am going wrong.. Help me out. Thanks in advance... -- Regards, Chandrakant Solanki -------------- next part -------------- An HTML attachment was scrubbed... URL: htt...

...protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # # You may also specify a default zone with "defaultzone=<zone>" where zone # is a two letter country code. # fxsks=1 fxsks=2 fxsks=3 fxsks=4 loadzone=us defaultzone=us ------------------------------------------------------------------------ -------------------------------------------------- /etc/asterisk/ -----------------------------...

...sk. The T1 provider (Eschelon) tried switching to 7 digits, and I only got the first digit of the 7. Can anybody help? We're adding another DID and I need to trap it correctly. Thanks. Here are snippets from the relevant files: -- zaptel.conf -- span=1,0,0,esf,b8zs e&m=1-8 loadzone=us defaultzone=us -- extensions.conf -- ; Need an extension to pick up calls from the T1 that uses e&m wink ; This comes in as a 6 instead of 4 full digits ; then pass to the s extension exten => 6,1,Wait(1) exten => 6,2,Goto(incoming,s,1) -- zapata.conf -- [channels] context=incoming signalling=em_w...

I am setting up 2 nufone lines. I want to make them both availiable for dial-out. How do you syntax it in extensions.conf so that it figures out which one is avaliable and dials out on it. Also how do you setup the name part of callerid for the outgoing lines?

...e available. Distributor ID: Debian Description: Debian GNU/Linux 7.6 (wheezy) Release: 7.6 Codename: wheezy uname -a Linux livasterisk 3.9.11-custom-3.9.11 #1 SMP Thu Jan 9 12:18:01 EST 2014 x86_64 GNU/Linux dahdi config: cat system.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us echocanceller=oslec,1-23 span=2,0,0,esf,b8zs fxsks=25-32 fxoks=33-48 defaultzone=us loadzone=us chan_dahdi: [channels] ; ; switchtype=national context=pri signalling=pri_cpe echocancel=yes echotraining = yes ;echocancelwhenbridged = yes pridialplan=unknown group=1 rxgain=-1.0 tx...

I'm having a problem defining my channels Here is my zapata.conf ----------------------------------------------------------------------------------------------------- ; Zapata telephony interface ; ; Configuration file [channels] ; rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ; Telephone attached to port 1 dahdichan => 2 ; Tel...

...el.conf i get the following error: --snip-- ZT_CHANCONFIG failed on channel 2: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? --snip-- My /etc/zaptel.conf looks like: --snip-- fxsks=1-2 fxoks=3-4 loadzone=au defaultzone=au --snip-- I currently have 2 x X100P cards that work no problem. Running a ztcfg -vvvv I get: Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slav...

...or some reason Asterisk is producing a US ring tone when it should be an Australian ring tone. I am using ztdummy and do not have any cards installed. My configuration is as follows. I am using Trixbox 1.2.2. Can someone please guide me into the right direction? zaptel.conf loadzone = au defaultzone = au zapata.conf [channels] language=au indications.conf [general] country=au -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061029/ab4aadc8/attachment.htm

Hi! I have configured the language support in asterisk to reproduce spanish prompts. I have lines for it in sip.conf, iax.conf, zapata.conf and voicemail.conf as shown: [general] ... language=es ... In zaptel.conf loadzone = es defaultzone = es When I check my voicemail I get in the CLI: -- Playing 'digits/4' (language 'en') -- Playing 'vm-Old' (language 'en') -- Playing 'vm-messages' (language 'en') Almost all the messages are played in english. If I make a *CLI&gt...