How many of what kind of cards do you have in your * server?
Because of the way * was programed, it's normally recommended to have only
two cards max and they have to have unique and seperate IRQ's. The
zaptel.conf seems to indicate you already had two cards and are adding a third.
Lyle
----- Original Message -----
From: Lucas Wrenn
To: asterisk-users@lists.digium.com
Sent: Friday, February 18, 2005 9:09 AM
Subject: [Asterisk-Users] Help with config.
Hello all.
I am trying to get my second x100p card set up and am having some troubles.
My zaptel.conf reads:
fxsks=1-2
fxoks=3-4
defaultzone=us
loadzone=us
before adding this card my zaptel.conf read:
fxsks=1
fxoks=2-3
defaultzone=us
loadzone=us
But now that I've made the change I am getting the following error when
running modprobe wcfxo and of course the same error if I use /sbin/ztcfg
The error reads:
ZT_CHANCONFIG failed on channel 3: No such device or address (6)
Any ideas on how to clean this up?
Even though it goes against everything I have found online I even tried
"fxsks=1,2" because they are two physically different cards.
Thanks for your help.
Stumped.
(lucasNOSPAM@NOSPAMeyeonsystems.com)
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050220/73d99e0e/attachment.htm