Olivier
2014-Oct-03 09:33 UTC
[asterisk-users] SPA112: one analog phone works, not the other
Hello, I'm preparing a setup before installing it within the next few days. In this setup, I'm using a SPA112 as an ATA for an analog phone. The target phone is a Gigaset A400 DECT handset. In my lab, I've got another A400 handset and an old Matracom 46 handset. When I connect my Matracom 46 handset to my SPA112, I can send and receive calls. When I connect my A400 handset to the same SPA112 port, I can receive calls (from SIP to analog) but cannot send (from analog to SIP) : nothing shows at asterisk console. When connecting this A400 handset to my provider box (which also has an FXS port), I can successfully send and receive.>From this, I conclude my A400 works but differently from my other handset.Basically, when dialing out with my A400, I'm observing this: - I dial my full number (eg 0123456789) then press Send key (as with a mobile phone), - then I hear a long dialing tone from the SPA112 (unplugging the cable between both cut this tone off), - then I hear dialing tones back (those are sent quite fast, one tone for each dialed digit), - then I hear a busy tone and nothing shows at asterisk console. Which SPA112 settings shall I change to get this A400 to work ? What would you suggest ? Regards
Olivier
2014-Oct-06 08:39 UTC
[asterisk-users] SPA112: one analog phone works, not the other
After hours of testing, adding a comma into my FXS port dialplan made it. This obviously relates to some timout handling but beside that, I still have to understand why this seems mandatory. Regards 2014-10-03 11:33 GMT+02:00 Olivier <oza.4h07 at gmail.com>:> Hello, > > I'm preparing a setup before installing it within the next few days. > > In this setup, I'm using a SPA112 as an ATA for an analog phone. > The target phone is a Gigaset A400 DECT handset. > > In my lab, I've got another A400 handset and an old Matracom 46 handset. > > When I connect my Matracom 46 handset to my SPA112, I can send and > receive calls. > When I connect my A400 handset to the same SPA112 port, I can receive > calls (from SIP to analog) but cannot send (from analog to SIP) : > nothing shows at asterisk console. > > When connecting this A400 handset to my provider box (which also has > an FXS port), I can successfully send and receive. > > From this, I conclude my A400 works but differently from my other handset. > > Basically, when dialing out with my A400, I'm observing this: > - I dial my full number (eg 0123456789) then press Send key (as with a > mobile phone), > - then I hear a long dialing tone from the SPA112 (unplugging the > cable between both cut this tone off), > - then I hear dialing tones back (those are sent quite fast, one tone > for each dialed digit), > - then I hear a busy tone and nothing shows at asterisk console. > > Which SPA112 settings shall I change to get this A400 to work ? > What would you suggest ? > > Regards