asterisk users - Sep 2009 - Sangoma A200 and battery removal detection ??!!!

Dear Folks,

Anyone knows if Sangoma supports or going to provide support for battery
removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it,
which is a very nice feature but what about Sangoma?

Regards.
--
M. Shokuie Nia.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090919/082c8d8a/attachment.htm

M Shokuie wrote:
>  
> DAHDI supports it, which is a very nice feature but what about Sangoma?
>  
I would suggest you ask Sangoma, they are very responsive.

Doug


-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."

On Sat, Sep 19, 2009 at 3:33 AM, M Shokuie <senahrm at gmail.com> wrote:
> Dear Folks,
>
> Anyone knows if Sangoma supports or going to provide support for battery
> removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it,
> which is a very nice feature but what about Sangoma?
>
>
Hello M. Shokuie,

In Asterisk installations, Sangoma boards use DAHDI drivers to hook up to
Asterisk ( because chan_dahdi works only with DAHDI devices). If you were
using FreeSWITCH you could use native wanpipe devices /dev/wanpipex_xx
instead of /dev/dahdi/x, which uses native Sangoma drivers.

In both modes the drivers notify on-hook, off-hook events depending on the
battery status.

 --
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090919/98afc390/attachment.htm

On Sat, Sep 19, 2009 at 3:33 AM, M Shokuie <senahrm at gmail.com> wrote:
> Dear Folks,
>
> Anyone knows if Sangoma supports or going to provide support for battery
> removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it,
> which is a very nice feature but what about Sangoma?
>
> Regards.
> --
> M. Shokuie Nia.
>
Hello Shokuie,

Tzafrir clarified to me that what you were asking for is alarm notification
(red alarm / alarm cleared) on battery removal and not hook notifications.
Until today, this wasn't implemented in Sangoma Wanpipe drivers, but it was
simple enough that I just did the quick fix and this little feature should
be available in the next wanpipe release within this week.

-- 
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090922/d0774883/attachment.htm