search for: 360s

Does anyone have a recommendation for a good SIP phone with a busy lamp field? I need my operator to be able to see extension status for about 20 extensions and transfer via HOLD + extension button. I've got a pair of SNOM 360s with the sidecar, but I'm very disappointed with them. The buttons are cheap and rubbery like a Sipura 841, the handset cord is short and cheap, the audio quality is not good, the speaker is bad, the button layout is too busy, and I've found it very hard to train my users how to use. Ha...

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (betwe...

Hi everyone, Ive just installed a bunch of Snom 360s, and now having a NIGHTMARE of problems! Ive got a receponist phone with a extra sidecar on it. And when she gets 2+ calls and puts them on hold, when she goes to transfer them out the calls on hold get merged together. Somehow the calls on hold get merged and not to the extension needed!! Any help...

I have a pair of snom 360s at a customer and they were giving me Low Memory errors. The distributor suggested updating the firmware. I did that, to the one just below 4.0 (which wasn't released yet). One of the phones is still giving the Low Memory error every 3-4 days. The other one had a broken display that was jus...

...over. In the DomU, I'll see a lock-up, and then filesystem errors. e.g.: Installing : kernel [############################################ ] 1/33EXT3-fs error (device xvda1) in ext3_ordered_writepage: IO failure In the Dom0, I'll see: sd 6:0:0:0: timing out command, waited 360s sd 6:0:0:0: SCSI error: return code = 0x06050000 end_request: I/O error, dev sdc, sector 37319 sd 7:0:0:0: timing out command, waited 360s sd 7:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdd, sector 29792137 sd 7:0:0:0: timing out command, waited 360s...

A while back i had asked about possible replacements for snom 360 phones that were breaking and causing issues and we all discussed the problems we had with the 360s and some suggestions were made but the new polycom phones had just hit the market and not many people were able to comment on them. Basically i am looking to get some new phones and in the process get rid of the countless number of problems i have had that has always been caused by phones (snom...

...om 320s. I'd like to have the message display regardless of what the phone is doing. I have been trying SMS, or the sipsak method on the wiki but I have had no luck thus far. Does anybody have this working, and if so, can you give me a pointer? I imagine this will work the same for the 360s as well. Sean -------------- next part -------------- A non-text attachment was scrubbed... Name: skennedy.vcf Type: text/x-vcard Size: 352 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/277e58b0/skennedy.vcf

...; quietmp3:/var/lib/asterisk/mohmp3,-z When I put a phone on hold, I get this in the console: -- Started music on hold, class 'default', on SIP/pjf-51af And yet, the MOH is still the same old song from before when I put a caller on hold. Asterisk has restarted, the phones (snom 360s) don't have their personalized SIP MOH settings set, the offending file has been deleted from the filesystem, I can't find anything else that sets the MOH to a different class, umm. Any ideas? Out of curiousity, I tried setting up this: exten => 6101,1,Answer exten => 6101,2,M...

...ble related (although perhaps not a bug): function(n) { line <- paste(as.character(trunc(runif(n)*100)),collapse=" ") system.time( rep <- gsub("[[:space:]]", "-", line) ) } gives rather long times rising v sharply for big strings (eg 2.2s at n=2e4, 360s at n=2e5 on AMD 1.2GHz). Other languages aren't so slow on this task (eg n=2e5: 0.4s ruby 1.8.1, and 5.2s python 2). Doubtless my extremely-quick-hack benchmarks aren't fair, but the difference still seems rather big. Mark <><

...e been experiencing some ongoing reliability problems with Asterisk for quite some time, and I am trying to find out if anyone else has experienced the same problems. We are running asterisk 1.4.17~dfsg-2+b1 on Debian Lenny, with a Digium PRI card, and have approximately 120 sip peers, mostly Snom 360s, with a few Grandstream GXP2000 and a handful of Handytone 486 units. The symptoms, when they occur, are as follows: -The inability to receive incoming calls to our ISDN PRI (callers get a busy tone), this starts off becoming intermittent but becomes permanent. -Asterisk cli commands work once,...

I am having major problems with the first run of Snom 360s that rolled out last month. I am working with the US vendor and they in turn are working with Snom but I wanted to see of anyone else was using these or having issues with them. Issues: Speakerphone/Hands Free volume spikes up and down during a call. You have to manually set the volume during eve...

Hi Folks, I have posted a couple of message to the list and do see them, even after waitin for long time (2 days). Can someone please point me to the rules for posting to this list? I think it had to do with the subject that I was looking for. I was looking for IAX terminiation service that can handle high volumes. Thanks John. --------------------------------- Yahoo!

I was looking at the aastra 9133i, however I was informed that this phone is no longer supported. What are good phones around the $100 - $125 price point? (Need POE) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david at safedatausa.com

Hi there, Is there anyone else using hints and buddy watch on 1.4beta3 with Polycoms? If so, can you give an indication of whether they are working or not? We had hints working fine on 1.2.1, but they have stopped working after upgrading our test server to 1.4beta3. We've tried rebooting the phones, 'sip reload', deleting and recreating the directory entries etc. A 'sip

...usy), but likewise the handset itself doesn't think it's in a call so it can't retrieve the call or do a proper hangup. I have no NAT in place and the handsets are all set to register/login and "qualify=yes" set (which I had hoped would sort this...) The handsets are SNOM 360s but I don't think this is directly relevant. Asterisk is setup to use FreePBX dialplan (but again don't think this is relevant?) Can someone please suggest a way to ensure that the calls get hungup - we had a 9 hour call earlier before someone noticed.... It's rare, but the conseq...

...rmware 6.5.1 (Current stable release) Asterisk 1.2.13 Call Completion: Off Peer to Perr call completion: On (canreinvite=no is set in sip.conf for each friend) Call join on Xfer (2 calls): Off Those settings seem to do the trick, I tested on Snom 320s with no errors at all, Im going to test on the 360s later today, but in theory its the same! Attended Transfer: Receive a call, place that call on hold via the hold button , then dial/press the extension you would like to consult with, if you want to transfer the call, hit the "Xfer" key in the upper left hand corner of the phone, it wi...

...approaches such as: D-Link DI-102 (Little Packet Priortizer with 2 RJ45 ports), or lower-end routers with QoS abilities like a WRT54GS? (I'm guessing these are more likely to cause a lot more packet loss than using managed switches) We are planning on using either Polycom 501, or SNOM 320/360s. Does the switch built into the phone handle QoS for the attached computer? Thank you for your input. Dana Harding -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060302/15baac61/attach...

Hi, I am looking for hardware sip phone with very good sound quality. Can anyone recommend ? I use to have Grandstream Budge-Tone 100 but I feel that the sound is not very satisfactory and volume too soft Regards ASLAY

Most people seem quite positive about Snom phones, I cannot share this opinion. The displays are dying quite often, and firmware is buggy. I have tried every firmware from 4.5 up to 5.x and 6.04 but keep having problems with phones locking up or rebooting during an ongoing conversation. REALLY annoying for a phone that is advertised / targeted as a business class phone

...e(5, "\215\34\353\364&\334{\313On~\362\\\271\315V0m\\\315\22"..., 1024) = 1024 write(5, "$\243\n\307I\374\315A\3\34\30\nt[;\223\36r\273O\356\331"..., 1024) = 1024 write(5, "\216\215\266\346+sV\356\223+3\375\355^r\267o\320b I\22"..., 1024) = 1024 write(5, "\372\360S$\365${y!]\3360\17\21\376\257\360\365g\2753XW"..., 1024) = 1024 write(5, "\265\344\216D\344\250e\346\17w9\255/o\253_\246\211\330"..., 1024) = 1024 write(5, "\324\375\242\235e\307\335\312B\334\247\265O^\21!?\221\257"..., 1024) = 1024 write(5, "\240{{l*\r\325H\365\224\21E...