search for: 104s

Does anyone know if this unit works with Asterisk? Thx. B.

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres t...

Is there any reference for the dg-104 telnet(shell) I need to log into a remote unit and reboot it over telnet. Its shell is not clear. David Hickman TSG Computer Consulting - Auctions 314-865-4752 x2 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 287 bytes Desc: not available Url :

I once (for a brief period) had dialtone, but I do know why :) Otherwise I get a boooop-booop-booop sequence. I cannot tell if this is the D-Link doing this, or asterisk... Who should be giving solid US dialtone? My indication.conf says: [general] country=us ... [us] description = United States / North America ringcadance = 2000,4000

I am have trouble getting caller id to work here is my current mgcp.conf am I missing something? ========================================================= Mgcp.conf [general] port=2427 [Egraph-1] ;dlink 104s-1 host = 12.151.207.2 context = local line => aaln/1 callerid = "jim's office 1" <321> line => aaln/2 callerid = "jim's office 2" <322> line => aaln/3 callerid = "jim's office 3" <323> line => aaln/4 callerid = "Laura'...

Hello, Does asterisk do transcoding when the call goes through the system, codecs are the same but signaling protocol is changed. example: SIP with GSM ---> IAX with GSM What quality destruction happen when I use transcoding? I know this is not a concrete/precise question, but I would like to know how is it in general. What CPU performance is needed for transcoding 30 channels e.g. from

I am installing a used DG104S.... I got it to ring from gnophone, but all I got was fast busies. so I upgraded based on Pavel's link: ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip So I now have: PROM Version: 3.0B22-D RUNTIME Version: 3.0B44-D But when I pick the phone up I get: ggdbg>000001...

How does one answer more than 100% of the calls in less than 60 seconds? techsupp has 0 calls (max 20) in 'leastrecent' strategy (104s holdtime), W:0, C:3, A:2, SL:166.7% within 60s

Hi, After spending some time trying to get a DG-104S working behind NAT, I finally found the problem. I made the incorrect assumption that nat=yes in mgcp.conf works just like sip.conf. The channels within a gateway are treated more closely to zap channels than sip channels (from a .conf standpoint). What this means is that you have to put nat=y...

Hi, For MGCP users. Is there any success stories with any MGCP IAD vendor. I?m trying to find an IAD which works with Asterisk. I?ve tried the Cisco IAD 2430 without success; but SIP on this IAD works but it?s limited (no authentication, no notify messages, etc) and with higher density IAD (16 or more ports) it?s nice to control using MGCP. Any information will be apreciated ! Thanks. --

Hello, I`m try to make the attended transfer work Dlink DG-104S via FLASH, when somebody calls my phone I pickup and press flash to get a second line to call another extension. When I press flash I hear no dialtone, and only a long and then small beep. When I try to dial digits I hear again those long+short beeps, but the extension dialed is not ringing. If...

I am have trouble getting caller id to work here is my current mgcp.conf am I missing something? ========================================================= Mgcp.conf [general] port=2427 [Egraph-1] ;dlink 104s-1 host = 12.151.207.2 context = local line => aaln/1 callerid = "jim's office 1" <321> line => aaln/2 callerid = "jim's office 2" <322> line => aaln/3 callerid = "jim's office 3" <323> line => aaln/4 callerid = "Laura'...

Hello, Anybody has it working with asterisk? Could you share your experience ( good/bad) Thank you -- Anton Yurchenko<phila@dg.net.ua> Digital Generation

Hello, I try to place a call between CISCO IP phone 7905 (h323) and an analogue telephone on DLINK DG-104S (mgcp). Call setup is handled ok - both way, but after connection of the call I get both site no-audio, even codec are Set to alow-64 both. The call is terminated with this debug output - Didn't get a frame from channel: MGCP/aaln/1@dlink-1 and is Hanged up. Jan 18 20:32:55 NOTICE[114695]: c...

I write the email again, the third time!!, cause the other two ones, I have had problems while sending them. I hope this time it works. Here is the email again: Hi (and sorry) everybody I'm starting with SIP and I wanted to ask some questions, perhaps silly ones, but I hope people can answer me! 1) Which codecs may I use? I want the SIP phones to call to the PSTN above all, but I have

Hello all, I understand that relatively high fragmentation is inherent to ZFS due to its COW and possible intermixing of metadata and data blocks (of which metadata path blocks are likely to expire and get freed relatively quickly). I believe it was sometimes implied on this list that such fragmentation for "static" data can be currently combatted only by zfs send-ing existing