I am installing a used DG104S....
I got it to ring from gnophone, but all I got was fast busies. so I
upgraded based on Pavel's link:
ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip
So I now have:
PROM Version: 3.0B22-D RUNTIME Version: 3.0B44-D
But when I pick the phone up I get:
ggdbg>000001604 DIM: 0 DSP ERROR: Reason= DIM ERROR: State Timeout
000001604 DIM: 0:*, State Timeout Error (State = WAIT_RESTART_IND)
000001604 DIM: 0:*, BRINGING DSP DOWN !!
000001604 DSP 0 Failure. Error: -1
000001604 CCU: 0, DSP Failure. State: 2
000001604 xGCP: ERROR 0X105 in .\src\ggxgcpif.c at line 3761 (coding
err)
000001604 CCU: 0, Coding now (officially) free
000001604 tcid 0. NO DSP RESOURCES
000001604 xgcpimh: CA message rejected
Is there another setting I have that is causing this? I did a factory
reset.
I then downgraded to
dg104S_runtime_b35.bin
But it would not keep the changes to the CA string, either via the web
or console...
Any ideas?
Thanks!
--
Zot O'Connor <zot@zotconsulting.com>
White Knight Hackers, Inc.
Zot O'Connor wrote:>I am installing a used DG104S.... > >I got it to ring from gnophone, but all I got was fast busies. so I >upgraded based on Pavel's link: > > > >ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip > >So I now have: > > > PROM Version: 3.0B22-D RUNTIME Version: 3.0B44-D > > >But when I pick the phone up I get: >ggdbg>000001604 DIM: 0 DSP ERROR: Reason= DIM ERROR: State Timeout >000001604 DIM: 0:*, State Timeout Error (State = WAIT_RESTART_IND) >000001604 DIM: 0:*, BRINGING DSP DOWN !! >000001604 DSP 0 Failure. Error: -1 >000001604 CCU: 0, DSP Failure. State: 2 >000001604 xGCP: ERROR 0X105 in .\src\ggxgcpif.c at line 3761 (coding >err) > >000001604 CCU: 0, Coding now (officially) free >000001604 tcid 0. NO DSP RESOURCES >000001604 xgcpimh: CA message rejected > >Is there another setting I have that is causing this? I did a factory >reset. > >I then downgraded to >dg104S_runtime_b35.bin > > >upload your old prom version too ... What hardware version is on your dg104s ?>But it would not keep the changes to the CA string, either via the web >or console... > >Any ideas? > >Thanks! > > >