On Thu, 2004-05-27 at 12:11, David H Hickman wrote:> Is there any reference for the dg-104 telnet(shell)
It is the same as the serial port. Login is same as webserver.
>From the manual.doc
General Setup Commands
nwdbg system reboot
Definition: This command is used to restart the device.
Parameter(s): None.
Example: nwdbg system reboot
nwdbg save changes
Definition: This command is used to save configuration changes
into flash and then restart the device.
Parameter(s): None.
Example: nwdbg save changes
nwdbg factory reset
Definition: This command is used to change all of the
configuration data to the default values, save the new
configuration data into flash, and then restart the device.
Parameter(s): None.
Example: nwdbg factory reset
nwdbg un <USERNAME>
Definition: This command sets the username if there is a
username string, or shows the username/password if only nwdbg un
is typed.
Parameter(s): <USERNAME, maximum string length is 12 characters>
Example: nwdbg un 123456789012
nwdbg pw <PASSWORD>
Definition: This command sets the password if there is a
password string, or shows the username/password if only nwdbg pw
is typed.
Parameter(s): <PASSWORD, maximum string length is 12 characters>
Example:
>
> I need to log into a remote unit and reboot it over telnet.
>
> Its shell is not clear.
>
>
> David Hickman
> TSG Computer Consulting - Auctions
> 314-865-4752 x2
--
Zot O'Connor <zot@zotconsulting.com>
White Knight Hackers, Inc.