Linux Tux
2010-Nov-16 14:17 UTC
[Samba] I can't rename any file/folder from samba clients.
Hello world,
I have a problem, i can't rename any file/folder from samba clients.
I can create and delete files/folders but not rename.
Permessions in /home/public : chmod -r 777 /home/public
I tried many configurations comment/uncomment below parameters in [public]
but without any effect.
Any idea ?
Thanks
This is my configuration:
This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors.
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux
context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#
#======================= Global Settings
====================================
[global]
# ----------------------- Network Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
workgroup = MYGROUP
server string = Samba Server Version %v
; netbios name = MYSERVER
; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
; hosts allow = 127. 192.168.12. 192.168.13.
# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach
# logs split per machine
; log file = /var/log/samba/%m.log
# max 50KB per log file, then rotate
; max log size = 50
# ----------------------- Standalone Server Options ------------------------
#
# Security can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
security = share
passdb backend = tdbsam
# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; security = domain
; passdb backend = tdbsam
; realm = MY_REALM
; password server = <NT-Server-Name>
# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations.
#
# Logon Scrpit let yuou specify a script to be run at login time on the
client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#
; security = user
; passdb backend = tdbsam
; domain master = yes
; domain logons = yes
# the login script name depends on the machine name
; logon script = %m.bat
# the login script name depends on the unix user used
; logon script = %u.bat
; logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
; logon path
; add user script = /usr/sbin/useradd "%u" -n -g users
; add group script = /usr/sbin/groupadd "%g"
; add machine script = /usr/sbin/useradd -n -c "Workstation
(%u)" -M
-d /nohome -s /bin/false "%u"
; delete user script = /usr/sbin/userdel "%u"
; delete user from group script = /usr/sbin/userdel "%u"
"%g"
; delete group script = /usr/sbin/groupdel "%g"
# ----------------------- Browser Control Options
----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; local master = no
; os level = 33
; preferred master = yes
#----------------------------- Name Resolution
-------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS
Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.
; wins support = yes
; wins server = w.x.y.z
; wins proxy = yes
; dns proxy = yes
# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option
load printers = yes
cups options = raw
; printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
; printcap name = lpstat
; printing = cups
# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares
; map archive = no
; map hidden = no
; map read only = no
; map system = no
; store dos attributes = yes
#============================ Share Definitions
=============================
;[homes]
; comment = Home Directories
; browseable = no
; writable = yes
; valid users = %S
; valid users = MYDOMAIN\%S
[public]
comment = public
path = /home/public/
writeable = yes
; browseable = yes
guest ok = yes
public = yes
guest only = yes
guest account = nobody
; hosts allow = 192.168.2.7
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
writable = no
printable = yes
# Un-comment the following and create the netlogon directory for Domain
Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
; [Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
; [public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = +staff
Hi, Make user as a file owner,I think it will work On 11/16/2010 07:47 PM, Linux Tux wrote:> Hello world, > > I have a problem, i can't rename any file/folder from samba clients. > I can create and delete files/folders but not rename. > Permessions in /home/public : chmod -r 777 /home/public > > I tried many configurations comment/uncomment below parameters in [public] > but without any effect. > > Any idea ? > Thanks > > This is my configuration: > > This is the main Samba configuration file. You should read the > # smb.conf(5) manual page in order to understand the options listed > # here. Samba has a huge number of configurable options (perhaps too > # many!) most of which are not shown in this example > # > # For a step to step guide on installing, configuring and using samba, > # read the Samba-HOWTO-Collection. This may be obtained from: > # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf > # > # Many working examples of smb.conf files can be found in the > # Samba-Guide which is generated daily and can be downloaded from: > # http://www.samba.org/samba/docs/Samba-Guide.pdf > # > # Any line which starts with a ; (semi-colon) or a # (hash) > # is a comment and is ignored. In this example we will use a # > # for commentry and a ; for parts of the config file that you > # may wish to enable > # > # NOTE: Whenever you modify this file you should run the command "testparm" > # to check that you have not made any basic syntactic errors. > # > #--------------- > # SELINUX NOTES: > # > # If you want to use the useradd/groupadd family of binaries please run: > # setsebool -P samba_domain_controller on > # > # If you want to share home directories via samba please run: > # setsebool -P samba_enable_home_dirs on > # > # If you create a new directory you want to share you should mark it as > # "samba-share_t" so that selinux will let you write into it. > # Make sure not to do that on system directories as they may already have > # been marked with othe SELinux labels. > # > # Use ls -ldZ /path to see which context a directory has > # > # Set labels only on directories you created! > # To set a label use the following: chcon -t samba_share_t /path > # > # If you need to share a system created directory you can use one of the > # following (read-only/read-write): > # setsebool -P samba_export_all_ro on > # or > # setsebool -P samba_export_all_rw on > # > # If you want to run scripts (preexec/root prexec/print command/...) please > # put them into the /var/lib/samba/scripts directory so that smbd will be > # allowed to run them. > # Make sure you COPY them and not MOVE them so that the right SELinux > context > # is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts > # > #-------------- > # > # > #======================= Global Settings > ====================================> > [global] > > # ----------------------- Network Related Options ------------------------- > # > # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH > # > # server string is the equivalent of the NT Description field > # > # netbios name can be used to specify a server name not tied to the hostname > # > # Interfaces lets you configure Samba to use multiple interfaces > # If you have multiple network interfaces then you can list the ones > # you want to listen on (never omit localhost) > # > # Hosts Allow/Hosts Deny lets you restrict who can connect, and you can > # specifiy it as a per share option as well > # > workgroup = MYGROUP > server string = Samba Server Version %v > > ; netbios name = MYSERVER > > ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24 > ; hosts allow = 127. 192.168.12. 192.168.13. > > # --------------------------- Logging Options ----------------------------- > # > # Log File let you specify where to put logs and how to split them up. > # > # Max Log Size let you specify the max size log files should reach > > # logs split per machine > ; log file = /var/log/samba/%m.log > # max 50KB per log file, then rotate > ; max log size = 50 > > # ----------------------- Standalone Server Options ------------------------ > # > # Security can be set to user, share(deprecated) or server(deprecated) > # > # Backend to store user information in. New installations should > # use either tdbsam or ldapsam. smbpasswd is available for backwards > # compatibility. tdbsam requires no further configuration. > > security = share > passdb backend = tdbsam > > > # ----------------------- Domain Members Options ------------------------ > # > # Security must be set to domain or ads > # > # Use the realm option only with security = ads > # Specifies the Active Directory realm the host is part of > # > # Backend to store user information in. New installations should > # use either tdbsam or ldapsam. smbpasswd is available for backwards > # compatibility. tdbsam requires no further configuration. > # > # Use password server option only with security = server or if you can't > # use the DNS to locate Domain Controllers > # The argument list may include: > # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] > # or to auto-locate the domain controller/s > # password server = * > > > ; security = domain > ; passdb backend = tdbsam > ; realm = MY_REALM > > ; password server =<NT-Server-Name> > > # ----------------------- Domain Controller Options ------------------------ > # > # Security must be set to user for domain controllers > # > # Backend to store user information in. New installations should > # use either tdbsam or ldapsam. smbpasswd is available for backwards > # compatibility. tdbsam requires no further configuration. > # > # Domain Master specifies Samba to be the Domain Master Browser. This > # allows Samba to collate browse lists between subnets. Don't use this > # if you already have a Windows NT domain controller doing this job > # > # Domain Logons let Samba be a domain logon server for Windows workstations. > # > # Logon Scrpit let yuou specify a script to be run at login time on the > client > # You need to provide it in a share called NETLOGON > # > # Logon Path let you specify where user profiles are stored (UNC path) > # > # Various scripts can be used on a domain controller or stand-alone > # machine to add or delete corresponding unix accounts > # > ; security = user > ; passdb backend = tdbsam > > ; domain master = yes > ; domain logons = yes > > # the login script name depends on the machine name > ; logon script = %m.bat > # the login script name depends on the unix user used > ; logon script = %u.bat > ; logon path = \\%L\Profiles\%u > # disables profiles support by specifing an empty path > ; logon path > > ; add user script = /usr/sbin/useradd "%u" -n -g users > ; add group script = /usr/sbin/groupadd "%g" > ; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M > -d /nohome -s /bin/false "%u" > ; delete user script = /usr/sbin/userdel "%u" > ; delete user from group script = /usr/sbin/userdel "%u" "%g" > ; delete group script = /usr/sbin/groupdel "%g" > > > # ----------------------- Browser Control Options > ---------------------------- > # > # set local master to no if you don't want Samba to become a master > # browser on your network. Otherwise the normal election rules apply > # > # OS Level determines the precedence of this server in master browser > # elections. The default value should be reasonable > # > # Preferred Master causes Samba to force a local browser election on startup > # and gives it a slightly higher chance of winning the election > ; local master = no > ; os level = 33 > ; preferred master = yes > > #----------------------------- Name Resolution > ------------------------------- > # Windows Internet Name Serving Support Section: > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both > # > # - WINS Support: Tells the NMBD component of Samba to enable it's WINS > Server > # > # - WINS Server: Tells the NMBD components of Samba to be a WINS Client > # > # - WINS Proxy: Tells Samba to answer name resolution queries on > # behalf of a non WINS capable client, for this to work there must be > # at least one WINS Server on the network. The default is NO. > # > # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names > # via DNS nslookups. > > ; wins support = yes > ; wins server = w.x.y.z > ; wins proxy = yes > > ; dns proxy = yes > > # --------------------------- Printing Options ----------------------------- > # > # Load Printers let you load automatically the list of printers rather > # than setting them up individually > # > # Cups Options let you pass the cups libs custom options, setting it to raw > # for example will let you use drivers on your Windows clients > # > # Printcap Name let you specify an alternative printcap file > # > # You can choose a non default printing system using the Printing option > > load printers = yes > cups options = raw > > ; printcap name = /etc/printcap > #obtain list of printers automatically on SystemV > ; printcap name = lpstat > ; printing = cups > > # --------------------------- Filesystem Options --------------------------- > # > # The following options can be uncommented if the filesystem supports > # Extended Attributes and they are enabled (usually by the mount option > # user_xattr). Thess options will let the admin store the DOS attributes > # in an EA and make samba not mess with the permission bits. > # > # Note: these options can also be set just per share, setting them in global > # makes them the default for all shares > > ; map archive = no > ; map hidden = no > ; map read only = no > ; map system = no > ; store dos attributes = yes > > > #============================ Share Definitions > =============================> > ;[homes] > ; comment = Home Directories > ; browseable = no > ; writable = yes > ; valid users = %S > ; valid users = MYDOMAIN\%S > > [public] > comment = public > path = /home/public/ > writeable = yes > ; browseable = yes > guest ok = yes > public = yes > guest only = yes > guest account = nobody > ; hosts allow = 192.168.2.7 > > > [printers] > comment = All Printers > path = /var/spool/samba > browseable = no > guest ok = no > writable = no > printable = yes > > # Un-comment the following and create the netlogon directory for Domain > Logons > ; [netlogon] > ; comment = Network Logon Service > ; path = /var/lib/samba/netlogon > ; guest ok = yes > ; writable = no > ; share modes = no > > > # Un-comment the following to provide a specific roving profile share > # the default is to use the user's home directory > ; [Profiles] > ; path = /var/lib/samba/profiles110 > ; browseable = no > ; guest ok = yes > > > # A publicly accessible directory, but read only, except for people in > # the "staff" group > ; [public] > ; comment = Public Stuff > ; path = /home/samba > ; public = yes > ; writable = yes > ; printable = no > ; write list = +staff