Hello I need to use to use ntlm_auth for samba users existing on the same machine.(samba PDC, Squid and Openldap in the same server) I read some mail in this list, particularly messages of Hesham S. Ahmed of Oct 7 2002 and I understand to do this I need join the PDC to itself but when I use net join I receive this message # /usr/bin/net join Unable to find a suitable server Unable to find a suitable server If I use # /usr/bin/net join -S BACKUP Password: Could not connect to server BACKUP Connection failed: NT_STATUS_CANT_ACCESS_DOMAIN_INFO I use samba with ldap database, this is a piece of the smb.conf file # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ====================================[global] workgroup = UNIVERSITA netbios name =BACKUP # server string is the equivalent of the NT Description field server string = Samba Server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 192.168.9. # if you want to automatically load your printer list rather # than setting them up individually then you'll need this # printcap name = /etc/printcap # #load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # This option tells cups that the data has already been rasterized # cups options = raw # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/utenti.log ; log file = /var/log/samba/%m.log # all log information in one file # log file = /var/log/samba/smbd.log log level=3 # Put a capping on the size of the log files (in Kb). max log size = 50 # Security mode. Most people will want user level security. See # security_level.txt for details. # Use password server option only with security = server ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. ; password level = 8 ; username level = 8 encrypt passwords=yes security = user mangling method = hash2 passdb backend = ldapsam:ldap://127.0.0.1/ ldap passwd sync = yes ldap admin dn= cn=Manager,dc=universita,dc=it ldap suffix = dc=universita,dc=it ldap group suffix = ou=Gruppi ldap user suffix= ou=Utenti ldap machine suffix= ou=Computers ldap idmap suffix= ou=Idmap ldap delete dn= yes idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 add machine script =/usr/sbin/smbldap-useradd -t 0 -w "%u" add user script =/usr/sbin/smbldap-useradd -a -m "%u" delete user script =/usr/sbin/smbldap-userdel "%u" add group script =/usr/sbin/smbldap-groupadd -p "%g" delete group script =/usr/sbin/smbldap-groupdel "%g" add user to group script =/usr/sbin/smbldap-groupmod -m "%u" "%g" delete user from group script =/usr/sbin/smbldap-groupmod -x "%u" "%g" set primary group script=/usr/sbin/smbldap-usermod -g "%g" "%u" template shell = /bin/false # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents #smb passwd file = /etc/samba/smbpasswd # The following are needed to allow password changing from Windows to # update the Linux system password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. ; unix password sync = Yes ; passwd program = /usr/bin/passwd %u ; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. interfaces = 127.0.0.1 eth1 bind interfaces only = true ### # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here ; remote announce = 192.168.1.255 192.168.2.44 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply local master = yes # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable os level = 99 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # All NetBIOS names must be resolved to IP Addresses # 'Name Resolve Order' allows the named resolution mechanism to be specified # the default order is "host lmhosts wins bcast". "host" means use the unix # system gethostbyname() function call that will use either /etc/hosts OR # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf # and the /etc/resolv.conf file. "host" therefore is system configuration # dependant. This parameter is most often of use to prevent DNS lookups # in order to resolve NetBIOS names to IP Addresses. Use with care! # The example below excludes use of name resolution for machines that are NOT # on the local network segment # - OR - are not deliberately to be known via lmhosts or via WINS. ; name resolve order = wins lmhosts bcast # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no logon drive=H: logon path=\\%L\profiles\%U create mask=0640 directory mask=0750 force create mode=0640 force directory mode=0750 nt acl support =No #============================ Share Definitions =============================# This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ====================================[global] workgroup = UNIVERSITA netbios name =BACKUP # server string is the equivalent of the NT Description field server string = Samba Server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 192.168.9. # if you want to automatically load your printer list rather # than setting them up individually then you'll need this # printcap name = /etc/printcap # #load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # This option tells cups that the data has already been rasterized # cups options = raw # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/utenti.log ; log file = /var/log/samba/%m.log # all log information in one file # log file = /var/log/samba/smbd.log log level=3 # Put a capping on the size of the log files (in Kb). max log size = 50 # Security mode. Most people will want user level security. See # security_level.txt for details. # Use password server option only with security = server ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. ; password level = 8 ; username level = 8 encrypt passwords=yes security = user mangling method = hash2 passdb backend = ldapsam:ldap://127.0.0.1/ ldap passwd sync = yes ldap admin dn= cn=Manager,dc=universita,dc=it ldap suffix = dc=universita,dc=it ldap group suffix = ou=Gruppi ldap user suffix= ou=Utenti ldap machine suffix= ou=Computers ldap idmap suffix= ou=Idmap ldap delete dn= yes idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 add machine script =/usr/sbin/smbldap-useradd -t 0 -w "%u" add user script =/usr/sbin/smbldap-useradd -a -m "%u" delete user script =/usr/sbin/smbldap-userdel "%u" add group script =/usr/sbin/smbldap-groupadd -p "%g" delete group script =/usr/sbin/smbldap-groupdel "%g" add user to group script =/usr/sbin/smbldap-groupmod -m "%u" "%g" delete user from group script =/usr/sbin/smbldap-groupmod -x "%u" "%g" set primary group script=/usr/sbin/smbldap-usermod -g "%g" "%u" template shell = /bin/false # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents #smb passwd file = /etc/samba/smbpasswd # The following are needed to allow password changing from Windows to # update the Linux system password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. ; unix password sync = Yes ; passwd program = /usr/bin/passwd %u ; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. interfaces = 127.0.0.1 eth1 bind interfaces only = true ### # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here ; remote announce = 192.168.1.255 192.168.2.44 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply local master = yes # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable os level = 99 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # All NetBIOS names must be resolved to IP Addresses # 'Name Resolve Order' allows the named resolution mechanism to be specified # the default order is "host lmhosts wins bcast". "host" means use the unix # system gethostbyname() function call that will use either /etc/hosts OR # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf # and the /etc/resolv.conf file. "host" therefore is system configuration # dependant. This parameter is most often of use to prevent DNS lookups # in order to resolve NetBIOS names to IP Addresses. Use with care! # The example below excludes use of name resolution for machines that are NOT # on the local network segment # - OR - are not deliberately to be known via lmhosts or via WINS. ; name resolve order = wins lmhosts bcast # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no logon drive=H: logon path=\\%L\profiles\%U create mask=0640 directory mask=0750 force create mode=0640 force directory mode=0750 nt acl support =No #============================ Share Definitions ==============================
Hello I need to use to use ntlm_auth for samba users existing on the same server.(samba PDC, Squid and Openldap in the same server) I was read some mails in this list, particularly messages of Hesham S. Ahmed of Oct 7 2002 and I understand to do this I need join the PDC to itself but when I use net join I receive this message # /usr/bin/net join Unable to find a suitable server Unable to find a suitable server If I use # /usr/bin/net join -S BACKUP Password: Could not connect to server BACKUP Connection failed: NT_STATUS_CANT_ACCESS_DOMAIN_INFO I use samba with ldap database, this is a piece of the smb.conf file # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ====================================[global] workgroup = UNIVERSITA netbios name =BACKUP # server string is the equivalent of the NT Description field server string = Samba Server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 192.168.9. # if you want to automatically load your printer list rather # than setting them up individually then you'll need this # printcap name = /etc/printcap # #load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # This option tells cups that the data has already been rasterized # cups options = raw # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/utenti.log ; log file = /var/log/samba/%m.log # all log information in one file # log file = /var/log/samba/smbd.log log level=3 # Put a capping on the size of the log files (in Kb). max log size = 50 # Security mode. Most people will want user level security. See # security_level.txt for details. # Use password server option only with security = server ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. ; password level = 8 ; username level = 8 encrypt passwords=yes security = user mangling method = hash2 passdb backend = ldapsam:ldap://127.0.0.1/ ldap passwd sync = yes ldap admin dn= cn=Manager,dc=universita,dc=it ldap suffix = dc=universita,dc=it ldap group suffix = ou=Gruppi ldap user suffix= ou=Utenti ldap machine suffix= ou=Computers ldap idmap suffix= ou=Idmap ldap delete dn= yes idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 add machine script =/usr/sbin/smbldap-useradd -t 0 -w "%u" add user script =/usr/sbin/smbldap-useradd -a -m "%u" delete user script =/usr/sbin/smbldap-userdel "%u" add group script =/usr/sbin/smbldap-groupadd -p "%g" delete group script =/usr/sbin/smbldap-groupdel "%g" add user to group script =/usr/sbin/smbldap-groupmod -m "%u" "%g" delete user from group script =/usr/sbin/smbldap-groupmod -x "%u" "%g" set primary group script=/usr/sbin/smbldap-usermod -g "%g" "%u" template shell = /bin/false # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents #smb passwd file = /etc/samba/smbpasswd # The following are needed to allow password changing from Windows to # update the Linux system password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. ; unix password sync = Yes ; passwd program = /usr/bin/passwd %u ; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. interfaces = 127.0.0.1 eth1 bind interfaces only = true ### # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here ; remote announce = 192.168.1.255 192.168.2.44 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply local master = yes # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable os level = 99 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # All NetBIOS names must be resolved to IP Addresses # 'Name Resolve Order' allows the named resolution mechanism to be specified # the default order is "host lmhosts wins bcast". "host" means use the unix # system gethostbyname() function call that will use either /etc/hosts OR # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf # and the /etc/resolv.conf file. "host" therefore is system configuration # dependant. This parameter is most often of use to prevent DNS lookups # in order to resolve NetBIOS names to IP Addresses. Use with care! # The example below excludes use of name resolution for machines that are NOT # on the local network segment # - OR - are not deliberately to be known via lmhosts or via WINS. ; name resolve order = wins lmhosts bcast # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no logon drive=H: logon path=\\%L\profiles\%U create mask=0640 directory mask=0750 force create mode=0640 force directory mode=0750 nt acl support =No #============================ Share Definitions =============================# This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ====================================[global] workgroup = UNIVERSITA netbios name =BACKUP # server string is the equivalent of the NT Description field server string = Samba Server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 192.168.9. # if you want to automatically load your printer list rather # than setting them up individually then you'll need this # printcap name = /etc/printcap # #load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # This option tells cups that the data has already been rasterized # cups options = raw # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/utenti.log ; log file = /var/log/samba/%m.log # all log information in one file # log file = /var/log/samba/smbd.log log level=3 # Put a capping on the size of the log files (in Kb). max log size = 50 # Security mode. Most people will want user level security. See # security_level.txt for details. # Use password server option only with security = server ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. ; password level = 8 ; username level = 8 encrypt passwords=yes security = user mangling method = hash2 passdb backend = ldapsam:ldap://127.0.0.1/ ldap passwd sync = yes ldap admin dn= cn=Manager,dc=universita,dc=it ldap suffix = dc=universita,dc=it ldap group suffix = ou=Gruppi ldap user suffix= ou=Utenti ldap machine suffix= ou=Computers ldap idmap suffix= ou=Idmap ldap delete dn= yes idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 add machine script =/usr/sbin/smbldap-useradd -t 0 -w "%u" add user script =/usr/sbin/smbldap-useradd -a -m "%u" delete user script =/usr/sbin/smbldap-userdel "%u" add group script =/usr/sbin/smbldap-groupadd -p "%g" delete group script =/usr/sbin/smbldap-groupdel "%g" add user to group script =/usr/sbin/smbldap-groupmod -m "%u" "%g" delete user from group script =/usr/sbin/smbldap-groupmod -x "%u" "%g" set primary group script=/usr/sbin/smbldap-usermod -g "%g" "%u" template shell = /bin/false # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents #smb passwd file = /etc/samba/smbpasswd # The following are needed to allow password changing from Windows to # update the Linux system password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. ; unix password sync = Yes ; passwd program = /usr/bin/passwd %u ; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. interfaces = 127.0.0.1 eth1 bind interfaces only = true ### # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here ; remote announce = 192.168.1.255 192.168.2.44 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply local master = yes # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable os level = 99 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # All NetBIOS names must be resolved to IP Addresses # 'Name Resolve Order' allows the named resolution mechanism to be specified # the default order is "host lmhosts wins bcast". "host" means use the unix # system gethostbyname() function call that will use either /etc/hosts OR # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf # and the /etc/resolv.conf file. "host" therefore is system configuration # dependant. This parameter is most often of use to prevent DNS lookups # in order to resolve NetBIOS names to IP Addresses. Use with care! # The example below excludes use of name resolution for machines that are NOT # on the local network segment # - OR - are not deliberately to be known via lmhosts or via WINS. ; name resolve order = wins lmhosts bcast # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no logon drive=H: logon path=\\%L\profiles\%U create mask=0640 directory mask=0750 force create mode=0640 force directory mode=0750 nt acl support =No #============================ Share Definitions ============================= Tanks for the Help Luigi