George Wolanin
2006-Mar-28 15:21 UTC
[Samba] Domain Browsing broken after upgrade from 3.0.10 -> 3.0.21
Or maybe it was the upgrade from FC2 -> FC4..........
I recently was running a FC2 Samba PDC and OpenLDAP, using Samba-3.0.10.
After I upgraded the server from FC2 to FC4 samba was broken and
wouldn't load because it was complaining about a library file not
existing. (libldap.so.2) I believe.. Sure enough it wasn't there. So
I had to recompile Samba 3.0.10 again. Well the compile failed for
3.0.10 with the following error
----------------------------------snip-----------------------------------------------
./configure --prefix=/opt/samba-3.0.10 --with-ldapsam
----------------------------------snip-----------------------------------------------
# make
Using FLAGS = -O -Iinclude -I/usr/src/samba-3.0.10/source/include
-I/usr/src/samba-3.0.10/source/ubiqx
-I/usr/src/samba-3.0.10/source/smbwrapper -I. -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -I/usr/src/samba-3.0.10/source
LIBS = -lcrypt -lresolv -lnsl -ldl
LDSHFLAGS = -shared -Wl,-Bsymbolic
LDFLAGS Compiling dynconfig.c
In file included from include/smb.h:1679,
from include/includes.h:819,
from dynconfig.c:21:
include/popt_common.h:25: error: array type has incomplete element type
include/popt_common.h:26: error: array type has incomplete element type
include/popt_common.h:27: error: array type has incomplete element type
include/popt_common.h:28: error: array type has incomplete element type
----------------------------------snip-----------------------------------------------
So i downloaded the latest version of samba, 3.0.21c and it compiled
just fine but when i started the SMB server, I wasn't able to browse
the servers within the domain. They just wouldn't show up. What I do
in my WinXP pro clients is click:
Start->My Network Places->Entire Network->Microsoft Windows
Network->BUNSIZE
I see the BUNSIZE domain, but as soon as I click BUNSIZE I get a blank
screen. In version 3.0.10 I used to see my two servers, OSCAR &
HEFE-WEZIEN
However, when I put in the Exploder address bar, \\OSCAR &
\\HEFE-WEIZEN, I am able to browse those servers. They just aren't
showing up in the Domain view.
Is there some kind of special upgrade procedure that I was supposed to
follow to maybe update the secret.tdb or is it just as easy as
creating a new one?
Also, when I try to browse the domain ON the FC4 server, I am unable
to see it and the servers. So this just doesn't seem to be a Winblows
issue.
All firewalls are off in the server.
I am wondering if FC4 has some hidden security features that I am not aware of..
----------------------------------smb.conf-----------------------------------------------
[global]
; unix charset = LOCALE
netbios name = OSCAR
workgroup = BUNSIZE
server string = Primary Domain Controller
; interfaces = eth0, lo
remote announce = 135.33.39.255
use sendfile = no
; bind interfaces only = Yes
passdb backend = ldapsam:ldap://127.0.0.1
; username map = /opt/samba/private/smbusers
log level = 6
syslog = 0
log file = /var/log/samba/%m
max log size = 50
smb ports = 139 445
; name resolve order = wins bcast hosts
time server = Yes
add user script = /opt/samba/sbin/smbldap-useradd -a -m %u
delete user script = /opt/samba/sbin/smbldap-userdel %u
add group script = /opt/samba/sbin/smbldap-groupadd -p %g
delete group script = /opt/samba/sbin/smbldap-groupdel %g
add user to group script = /opt/samba/sbin/smbldap-groupmod -m %u %g
delete user from group script /opt/samba/sbin/smbldap-groupmod -x %u %g
set primary group script = /opt/samba/sbin/smbldap-usermod -g %g %u
add machine script = /opt/samba/sbin/smbldap-useradd -w %u
logon script = scripts\logon.bat
logon path = \\%L\profiles\%U
logon drive = X:
domain logons = yes
os level = 255
preferred master = yes
domain master = yes
security = user
local master = yes
wins support = yes
browseable = yes
ldap suffix = dc=xx,dc=xxx,dc=com
ldap machine suffix = ou=Computers
ldap user suffix = ou=Pee
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Users
ldap admin dn = cn=Manager,dc=xx,dc=xx,dc=com
idmap backend = ldap:ldap://127.0.0.1
idmap uid = 10000-20000
idmap gid = 10000-20000
# printer configuration
load printers = Yes
printing = cups
printcap name = cups
guest account = nobody
----------------------------------snip-----------------------------------------------
Thanks in advance for any help that you can provide.
-G
George Wolanin
2006-Mar-30 18:07 UTC
[Samba] Re: Domain Browsing broken after upgrade from 3.0.10 -> 3.0.21
Anyone have any thoughts on this??
On 3/28/06, George Wolanin <george.wolanin@gmail.com> wrote:
Or maybe it was the upgrade from FC2 -> FC4..........
I recently was running a FC2 Samba PDC and OpenLDAP, using Samba-3.0.10.
After I upgraded the server from FC2 to FC4 samba was broken and
wouldn't load because it was complaining about a library file not
existing. (libldap.so.2) I believe.. Sure enough it wasn't there. So
I had to recompile Samba 3.0.10 again. Well the compile failed for
3.0.10 with the following error
----------------------------------snip-----------------------------------------------
./configure --prefix=/opt/samba-3.0.10 --with-ldapsam
----------------------------------snip-----------------------------------------------
# make
Using FLAGS = -O -Iinclude -I/usr/src/samba-3.0.10/source/include
-I/usr/src/samba-3.0.10/source/ubiqx
-I/usr/src/samba-3.0.10/source/smbwrapper -I. -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -I/usr/src/samba-3.0.10/source
LIBS = -lcrypt -lresolv -lnsl -ldl
LDSHFLAGS = -shared -Wl,-Bsymbolic
LDFLAGS Compiling dynconfig.c
In file included from include/smb.h:1679,
from include/includes.h:819,
from dynconfig.c:21:
include/popt_common.h:25: error: array type has incomplete element type
include/popt_common.h:26: error: array type has incomplete element type
include/popt_common.h:27: error: array type has incomplete element type
include/popt_common.h:28: error: array type has incomplete element type
----------------------------------snip-----------------------------------------------
So i downloaded the latest version of samba, 3.0.21c and it compiled
just fine but when i started the SMB server, I wasn't able to browse
the servers within the domain. They just wouldn't show up. What I do
in my WinXP pro clients is click:
Start->My Network Places->Entire Network->Microsoft Windows
Network->BUNSIZE
I see the BUNSIZE domain, but as soon as I click BUNSIZE I get a blank
screen. In version 3.0.10 I used to see my two servers, OSCAR &
HEFE-WEZIEN
However, when I put in the Exploder address bar, \\OSCAR &
\\HEFE-WEIZEN, I am able to browse those servers. They just aren't
showing up in the Domain view.
Is there some kind of special upgrade procedure that I was supposed to
follow to maybe update the secret.tdb or is it just as easy as
creating a new one?
Also, when I try to browse the domain ON the FC4 server, I am unable
to see it and the servers. So this just doesn't seem to be a Winblows
issue.
All firewalls are off in the server.
I am wondering if FC4 has some hidden security features that I am not aware of..
----------------------------------smb.conf-----------------------------------------------
[global]
; unix charset = LOCALE
netbios name = OSCAR
workgroup = BUNSIZE
server string = Primary Domain Controller
; interfaces = eth0, lo
remote announce = xxx.xxx.xxx.xxx
use sendfile = no
; bind interfaces only = Yes
passdb backend = ldapsam:ldap://127.0.0.1
; username map = /opt/samba/private/smbusers
log level = 6
syslog = 0
log file = /var/log/samba/%m
max log size = 50
smb ports = 139 445
; name resolve order = wins bcast hosts
time server = Yes
add user script = /opt/samba/sbin/smbldap-useradd -a -m %u
delete user script = /opt/samba/sbin/smbldap-userdel %u
add group script = /opt/samba/sbin/smbldap-groupadd -p %g
delete group script = /opt/samba/sbin/smbldap-groupdel %g
add user to group script = /opt/samba/sbin/smbldap-groupmod -m %u %g
delete user from group script /opt/samba/sbin/smbldap-groupmod -x %u %g
set primary group script = /opt/samba/sbin/smbldap-usermod -g %g %u
add machine script = /opt/samba/sbin/smbldap-useradd -w %u
logon script = scripts\logon.bat
logon path = \\%L\profiles\%U
logon drive = X:
domain logons = yes
os level = 255
preferred master = yes
domain master = yes
security = user
local master = yes
wins support = yes
browseable = yes
ldap suffix = dc=xx,dc=xxx,dc=com
ldap machine suffix = ou=Computers
ldap user suffix = ou=Pee
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Users
ldap admin dn = cn=Manager,dc=xx,dc=xx,dc=com
idmap backend = ldap:ldap://127.0.0.1
idmap uid = 10000-20000
idmap gid = 10000-20000
# printer configuration
load printers = Yes
printing = cups
printcap name = cups
guest account = nobody
----------------------------------snip-----------------------------------------------
Thanks in advance for any help that you can provide.
-G